Maintenance Mold Development

ACO, Inc.; Ohio; Hybrid; USD 36,000 - 41,000; Full time

Benefits offered by this job

Medical & Dental

Vision, Life Insurance

Disability — Short-Term, Long-Term

401(k) Match

HSA & FSA

Job summary

ACO, Inc. in OH is seeking a Maintenance Mold Development Technician to maintain production equipment and PLCs, perform preventive maintenance, and support upgrades. You will troubleshoot mechanical and electrical systems, perform welding, and ensure safe, efficient operation of manufacturing equipment.

The role requires an Electrical Technician certification and at least five years of hands-on experience, with welding skills and PLC troubleshooting. Travel between plants may be required.

Qualifications

• Requires completion of an Electrical Technician certification program and hands-on experience for a minimum of five years.
• Certificate in Equipment Maintenance from technical school; or two years related experience and/or training; or equivalent combination.
• Must be able to operate company vehicle and mobile equipment (Forklift, Reach Fork, Scissor lift).
• Basic welding fabrications skills with ACR, MIG and TIG.
• Strong troubleshooting skill for electro-mechanical and building maintenance.
• Basic Computer/PLC troubleshooting skills; understanding of ladder logic is helpful.
• Ability to read and interpret safety rules, operating and maintenance instructions.

Responsibilities

• Repair and maintain production equipment; observe hazards and service needs.
• Troubleshoot mechanical/electrical systems and PLC I/O with root cause analysis.
• Repair 480-3 phase, DC 24V systems, and other control components quickly and safely.
• Install, retrofits, and upgrades on electrical and mechanical systems.
• Set up and operate tools; maintain shop and facility equipment.
• Maintain inventory of spare parts and accurate repair records.
• Follow preventive maintenance schedules and SOPs for equipment.
• Travel occasionally between plants on all shifts.
• Comply with safety and quality policies.

Skills

Electrical troubleshooting

Mechanical maintenance

Welding skills

PLC troubleshooting

Preventive maintenance

Education

Electrical Technician certification

Equipment Maintenance certificate

Related experience or training

Tools

Forklift operation

Reach Fork

Scissor lift

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Maintenance Mold Development

Full time Technical Mentor, OH, US

30+ days ago Requisition ID: 1370

Salary Range: $26.00 To $30.00 Hourly

SUMMARY:

Responsible for repairing and maintaining mechanical equipment systems and programmable logic controls on the Production Equipment. Perform a variety of Production Equipment Maintenance. Backup other maintenance personnel on projects as required.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform maintenance and repairs involving some of the following: Observes functioning of installed equipment to detect hazards, problems, and the need for service repair and or replacement of electrical system and mechanical components. ARC and MIG Welding fabrications work on production equipment in the facility.
• Troubleshoot diagnose and repair mechanical/electrical system problems such as electrical circuits, controls, motor starters, proximity switches, photo-eyes, and PLCs I/O system, contactor, and relay-base, using root cause analysis principles and taking corrective action to repairing or replacing electrical and mechanical component.
• Debug, and repair production equipment 480-3 phase and DC 24 voltage system, AC/DC circuit, frequency drives, load cells, power distribution, overhead cranes, induction motor, and other machine control components, as quickly and safely as possible to ensure minimal production down time on manufacturing equipment.
• Responsible for equipment installations, retrofits, and upgrades on electrical and mechanical system.
• Set up and operate a range of machine tools and equipment to make sure repairs are done safety and efficiently, Responsibility for maintaining department tools and equipment in the maintenance shop and facility.
• Identify and troubleshoot sources of mechanical failure. Make recommendations and report problems to immediate Supervisor for future improvements on building and or equipment in the manufacturing facility
• Maintain neat and orderly inventory of equipment spare parts, i.e. busses, controls, switches etc.
• Follow preventive maintenance schedule for equipment. Keep neat and accurate repair records and other department information such as walk-throughs and daily inspection on manufacturing equipment in the plant.
• Follow standard operating procedures for preventative maintenance and predictive production equipment.
• Position is responsible for building and grounds property up keeping and maintenance personnel.
• Maintain clean, neat, and orderly work areas to ensure safety and 5s is met in the facility and maintenance shop.
• Travel occasionally from plant to plant will be required for maintenance technician on all shifts.
• Comply with Company policies, procedures, and protocol including safety is meet and quality is assured.

EDUCATION and EXPERIENCE:

• Requires completion of an Electrical Technician certification program, and hands on experience for a Minimum of five years’ experience.
• Certificate in Equipment Maintenance from technical school; or two years related experience and/or Training; or equivalent combination of education and experience.

ADDITIONAL ELIGIBILITY REQUIREMENTS:

• Must be able to operate company vehicle and mobile equipment Forklift, Reach Fork, scissor lift etc.
• Must have basic welding fabrications skills with ACR, MIG and TIG.
• Must have strong troubleshooting skill for electro-mechanical and building maintenance.
• Must have basic Computer/PLC troubleshooting skills understanding of ladder logic is helpful.
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions.
• Ability to read electrical and mechanical drawings/schematics for plant equipment.
• Ability to write routine reports and correspondence with company guidelines and procedures.
• Ability to speak effectively before groups of customers or employees of organization.
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Also basic measuring tools.
• Must have basic computer skills using Windows and Microsoft Office.
• Medical & Dental
• Company paid - Vision, Life Insurance, Short-Term, & Long-Term Disability
• 401(k) Match
• HSA & FSA

PHYSICAL DEMANDS:

While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee is occasionally required to walk; stoop, kneel, or crouch; and talk or hear. The employee must frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, and color vision.

OTHER DUTIES:

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.