Production Engineer

Senrasystems

Cypress (CA)

On-site

USD 75,000 - 85,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Equity participation
Medical coverage
Dental & Vision
FSA/DSA
20 vacation days
401(k) plan
Free parking

Job summary

Senra Systems on the factory floor is seeking a Production Engineer who will be embedded with manufacturing as the technical resource for assembly technicians during active production. You will troubleshoot builds in real time, verify kits, and support first articles while coordinating with ME, Production, and Quality teams.

You will own floor documentation, perform root cause analysis, and mentor technicians to IPC/WHMA-A-620 and NASA 8739.4 standards, ensuring a quality-first culture and

Qualifications

  • 1–3 years hands-on experience in wire harness or cable assembly manufacturing.
  • Ability to read and interpret wiring diagrams, schematics, assembly drawings, and work instructions.
  • Familiarity with IPC/WHMA-A-620 workmanship standards.

Responsibilities

  • Serve as on-floor technical resource during active production.
  • Review and disposition NCRs with documented rationale.
  • Provide hands-on support during first articles and new part introductions.
  • Audit incoming kits against build package and address discrepancies.
  • Answer technical questions and coach technicians to workmanship standards.

Skills

Wire harnessing
Reading wiring diagrams
IPC/WHMA-A-620 familiarity
NASA 8739.4 familiarity
Root cause analysis

Tools

MIL-spec connectors

Job description

At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration.

We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed.

We’re building a dedicated Production Engineering function at Senra Systems – a team that owns the floor, not the desk. As a Production Engineer, you will be embedded in manufacturing as the technical resource our assembly technicians rely on during active production. While Manufacturing Engineers own the front-end documentation – BOMs, Engineering Masters, work instructions, and formboards – you own execution.

You’ll troubleshoot builds in real time, support first articles, verify cable and component kits, disposition non-conformances, and serve as the day-to-day engineering presence that keeps production moving. This role reports to the Lead Production Engineer and works closely with the Manufacturing Engineering, Production and Quality teams.

What you'll own:
Floor Troubleshooting & Real-Time Support
  • Serve as the on-floor technical resource during active production – resolving assembly issues, documentation discrepancies, and build questions without halting throughput
  • Identify and elevate systemic issues to the Lead PE or ME team with clear, structured documentation
  • Participate in root cause analysis and corrective action implementation for recurring production issues
NCR Disposition
  • Review and disposition non-conformances generated on the floor with documented rationale (use-as-is, rework, or scrap)
  • Maintain NCR aging within SLA; escalation items that require engineering disposition beyond your scope
  • Coordinate with Quality on in-process inspection holds and final disposition sign-off
First Article & First Build Support
  • Provide hands-on engineering support during first articles and new part number introductions
  • Walk the floor during first builds, verify documentation accuracy, and identify gaps before they become production issues
  • Capture redlines and documentation feedback and submit to the ME team in a structured, timely manner
Kit Verification & Material Flow
  • Audit incoming cable and component kits against the build package before they reach the floor
  • Flag shortages, substitutions, or discrepancies and coordinate resolution with kitting, supply chain and engineering
Technician Support & Mentorship
  • Answer technical questions from assembly technicians on wire prep, crimping, connector insertion, splicing, and harness routing
  • Coach to IPC/WHMA-A-620 and NASA 8739.4 workmanship standards; recognize and address non-conforming work at the source
  • Contribute to a culture of quality ownership on the floor – every technician should know what good looks like
What you'll bring to the team:
Required:
  • 1–3 years of hands‑on experience in wire harness or cable assembly manufacturing
  • Working knowledge of wire harness assembly processes: wire prep, crimping, soldering, connector insertion, and harness routing
  • Familiarity with IPC/WHMA-A-620 workmanship standards
  • Ability to read and interpret wiring diagrams, schematics, assembly drawings, and work instructions
  • Strong attention to detail and a quality‑first mindset
  • Must be a U.S. Person (U.S. Citizen or Lawful Permanent Resident)
Preferred:
  • Prior experience as a manufacturing, build or sustaining engineer
  • Extensive technical authoring experience i.e. developing engineering masters, dispositioning non conformances, etc.
  • High degree of ownership, self-starting and proactive with a bias toward action and solutions
  • Experience in an aerospace or defense manufacturing environment
  • Exposure to NASA 8739.4 workmanship requirements
  • Familiarity with MIL-spec connectors and contacts (D-sub, LEMO, Glenair, Amphenol, etc.)
  • IPC/WHMA-A-620 CIS or CIT certification
  • Experience with NCR or nonconformance management workflows
Success in This Role Looks Like:
Within 3–6 months, you will have:
  • Become a trusted technical resource on the floor – technicians know to come to you first
  • Achieved consistent NCR disposition turnaround within SLA with clear, documented rationale
  • Supported at least one full first article cycle from kit verification through build completion and redline capture
  • Demonstrated a consistent quality‑first approach that has visibly reduced rework or build stops on your assigned product families
Compensation:
  • Compensation will be based on experience, qualifications, and other job-related factors.
  • Salary Range: $75,000-$85,000
  • This is an onsite role at our factory in Cypress, CA.
Benefits:
  • Unmatched opportunities to drive impact on a friendly and mission-driven team
  • Own a piece of the pie with equity participation!
  • Comprehensive medical, dental, vision, life and long-term disability coverage
  • Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses
  • 20 vacation days per year and 12 company holidays for rest and relaxation
  • a 401(k) planto set yourself up for retirement
  • Choose a record you love, and we’ll add it to our growing vinyl collection!
  • $50/month DoorDash credit – lunch is on us!
  • Up to $100/month reimbursement for gym memberships
  • Fully stocked kitchen with snacks and beverages
  • Regular team-building events, lunches, and the occasional breakfast burrito!
  • Bright, open office with communal spaces for collaboration and free parking
  • Conveniently located near the metro, major freeways and local dining spots

We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

ITAR REQUIREMENTS:
  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .
Pay range

$75,000 — $85,000 USD

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Manufacturing Engineer Cypress, California, United States
Manufacturing Engineer Cypress, California, United States

Senra Systems, Inc. • Cypress (CA)

On-site
USD 100,000 - 130,000
Medical, dental, vision
401(k) plan
Equity participation
+3
Senior Manufacturing Engineer
Senior Manufacturing Engineer

Senra Systems • Cypress (CA)

On-site
USD 130,000 - 180,000
Comprehensive medical, dental, and vision coverage
20 vacation days per year
$50/month DoorDash credit
+2
Production Engineer
Production Engineer

Senra Systems • Cypress (CA)

On-site
USD 65,000 - 95,000
Lead Technician
Lead Technician

senrasystems • Cypress (CA)

On-site
USD 25,000 - 32,000
Equity participation
Medical, dental, vision coverage
401(k) plan
+2
Harnessing Technician
Harnessing Technician

Senra Systems • Cypress (CA)

On-site
USD 32,000 - 50,000
Equity participation
Medical/dental/vision coverage
FSA/DSA
+8
Harnessing Technical Trainer Cypress, California, United States
Harnessing Technical Trainer Cypress, California, United States

Senra Systems, Inc. • Cypress (CA)

On-site
USD 62,000 - 83,000
Equity participation
Onsite role with Redondo Beach or CYPs
Comprehensive benefits (medical, dent,
+4
Production Manager
Production Manager

Senra Systems • Cypress (CA)

On-site
USD 140,000 - 180,000
Equity participation
Comprehensive medical coverage
Unlimited PTO
+2
Aerospace Harnessing Technician — High-Impact Configurator
Aerospace Harnessing Technician — High-Impact Configurator

Senra Systems • Cypress (CA)

On-site
USD 32,000 - 50,000
Program Manager
Program Manager

Senra Systems, Inc. • Cypress (CA)

On-site
USD 110,000 - 160,000
Equity participation
Comprehensive medical, dental, vision
401(k)
+3
Technical Program Manager
Technical Program Manager

Senra Systems • Redondo Beach (CA)

On-site
USD 120,000 - 200,000
Comprehensive medical, dental, and vision coverage
401(k) plan for retirement
20 vacation days per year