Process Technician-WEEKEND ONLY

Geiger Automotive USA; Suwanee (GA); On-site; USD 41,000 - 44,000; Full time

Job summary

Geiger Automotive USA is hiring a Process Technician for the weekend shift in Suwanee, GA. The role focuses on setting up and maintaining one- and two-shot injection molding processes, troubleshooting quality and productivity issues, and ensuring safety and cleanliness on the line.

The technician will perform machine adjustments, maintenance, and minor repairs, mentor teammates, and support continuous improvement efforts. Lean practices and teamwork are essential to success.

Qualifications

• 3 years’ experience with set-ups and troubleshooting for issues in Plastic Injection Molding.
• Injection Mold Set Up apprenticeship highly desirable.
• Experienced with two-shot molding/over molding.
• Able to perform P.M. on production molds and proper greasing of tools.
• Able to troubleshoot 3 Axis robots and automation systems.
• Lean manufacturing culture orientation.
• Team oriented and self-motivated.

Responsibilities

• Setup, startup, diagnosis and troubleshooting of injection molding presses and secondary equipment while ensuring safety and quality.
• Independently perform machine adjustments within allowable parameters and minor repairs on production equipment.
• Identify improvements and support continuous improvements activities with plant leadership.
• Sustain 5S program in production cells and report repeat variation to leadership.
• Ensure adherence to customer specs and document downtime, production, scrap, and deviations.
• Mentor colleagues and assist in training new members.
• Assist in identifying non-conforming product and re-work as necessary.
• Work safely and follow safety policies; participate in safe-work practices.
• Assist in covering break times and other duties as requested by plant leadership.

Skills

Injection molding

Two-shot molding

Set up & troubleshooting

Lean manufacturing

Team oriented

P.M. on molds

Automation systems

Education

Maintenance/Engineering experience 5-7 years

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Process Technician-WEEKEND ONLY

2 days ago Requisition ID: 1018

Salary Range: $30.00 To $32.00 Hourly

Position is responsible for:

• Cost-oriented, quality-oriented, and timely monitoring of measuring equipment
• Compliance of the processes and procedures found in the IMH
• Cleanness, tidiness, work safety and environment protection in their field of work
• Direction and coordination of all quality assurance issues to ensure enhanced quality and cost.
• Acceptability with company product (both new product and old) and achieves this objective with a
• focus on quality, maintaining cost effectiveness

Basic Function:

This position will be responsible for setting-up, modifying, and maintaining process parameters for one-

shot and two-shot injection molding processes, troubleshooting injection molding and automation

processes regarding quality, performance, and productivity problems, and maintaining cleanness,

tidiness, and work safety Standards.

Your tasks will be:

• Perform setup, startup, diagnosis and troubleshooting of the injection molding presses, auxiliary equipment, and secondary production equipment while ensuring that safety and quality are the
• Independently, perform machine adjustments within allowable parameters, perform routine machine maintenance tasks and minor repairs on all production equipment, including molds, tools, and peripheral production equipment on assigned lines.
• Identify and recommend improvements and support all company continuous improvements activities. Work with plant leadership, set up and maintenance to implement improvements.
• Sustain 5S program in the production cells, supporting team members and reporting repeat variation to leadership.
• Ensure adherence to customer specifications and accurately document all records related to downtime, production, scrap, repairs, process deviation, etc.
• Act as a mentor and technical resource for other team members and new members learning technical functions.
• Assist in identifying non-conforming product and re-work of non-conforming product as necessary.
• Work safely, following all safety policies and proactively participating in the safe work of others and the safety of the overall environment.
• Perform other miscellaneous support work to enable the team to be successful and as requested by plant leadership. Assist in the duties of other team members, including helping to cover break times, etc.

Knowledge and Skills:

• 3 years’ experience with set-ups and troubleshooting for issues such as flash, short-shot, etc., in Plastic Injection Molding environment.
• Injection Mold Set Up apprenticeship highly desirable.
• Experienced with two-shot molding/over molding.
• Able to perform P.M. on production molds (eg: mold cleaning, minor mold and machine maintenance, proper greasing of tools).
• Able to perform programming functions and troubleshoot 3 Axis robots and automation systems
• Lean manufacturing culture orientation
• Team oriented and self-motivated

Education/Qualifications

• 5-7 years Maintenance/Engineering experience in a manufacturing environment.
• Injection molding and high-speed Assembly/Packaging experience preferred.
• Lean manufacturing culture orientation.

Experience:

• Process tech: 3-5 years

Pease note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Position is responsible for:

• Cost-oriented, quality-oriented, and timely monitoring of measuring equipment
• Compliance of the processes and procedures found in the IMH
• Cleanness, tidiness, work safety and environment protection in their field of work
• Direction and coordination of all quality assurance issues to ensure enhanced quality and cost.
• Acceptability with company product (both new product and old) and achieves this objective with a
• focus on quality, maintaining cost effectiveness

Basic Function:

This position will be responsible for setting-up, modifying, and maintaining process parameters for one-

shot and two-shot injection molding processes, troubleshooting injection molding and automation

processes regarding quality, performance, and productivity problems, and maintaining cleanness,

tidiness, and work safety Standards.

Your tasks will be:

• Perform setup, startup, diagnosis and troubleshooting of the injection molding presses, auxiliary equipment, and secondary production equipment while ensuring that safety and quality are the
• Independently, perform machine adjustments within allowable parameters, perform routine machine maintenance tasks and minor repairs on all production equipment, including molds, tools, and peripheral production equipment on assigned lines.
• Identify and recommend improvements and support all company continuous improvements activities. Work with plant leadership, set up and maintenance to implement improvements.
• Sustain 5S program in the production cells, supporting team members and reporting repeat variation to leadership.
• Ensure adherence to customer specifications and accurately document all records related to downtime, production, scrap, repairs, process deviation, etc.
• Act as a mentor and technical resource for other team members and new members learning technical functions.
• Assist in identifying non-conforming product and re-work of non-conforming product as necessary.
• Work safely, following all safety policies and proactively participating in the safe work of others and the safety of the overall environment.
• Perform other miscellaneous support work to enable the team to be successful and as requested by plant leadership. Assist in the duties of other team members, including helping to cover break times, etc.

Knowledge and Skills:

• 3 years’ experience with set-ups and troubleshooting for issues such as flash, short-shot, etc., in Plastic Injection Molding environment.
• Injection Mold Set Up apprenticeship highly desirable.
• Experienced with two-shot molding/over molding.
• Able to perform P.M. on production molds (eg: mold cleaning, minor mold and machine maintenance, proper greasing of tools).
• Able to perform programming functions and troubleshoot 3 Axis robots and automation systems
• Lean manufacturing culture orientation
• Team oriented and self-motivated

Education/Qualifications

• 5-7 years Maintenance/Engineering experience in a manufacturing environment.
• Injection molding and high-speed Assembly/Packaging experience preferred.
• Lean manufacturing culture orientation.

Experience:

• Process tech: 3-5 years

Pease note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

1st Shift: 7AM-3:30PM
2nd Shift: 3PM-11:30PM
3rd Shift: 11PM-7:30AM