Process Technician

Wright Plastic Products

Madisonville (TN)

On-site

USD 38,000 - 52,000

Full time

16 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Wright Plastic Products, LLC in Madisonville, TN seeks a Process Technician for the 3rd shift. You will set up and start up production jobs, troubleshoot processes, and train new technicians while maintaining molds and handling materials.

The role emphasizes safety, documentation, and continuous improvement in a plastic injection molding environment. Responsibilities include parameter checks, mold changes, start-ups, tool samples, overtime as needed, and close coordination with the QA team to

Qualifications

  • Reading 7-9th grade and math 8th grade to be determined by testing.
  • Mechanical aptitude.
  • Ability to lift up to 50 lbs.
  • Ability to supply own tools.
  • Ability to obtain valid hi-lo license.
  • Good performance record.
  • Must be able to demonstrate competency through testing and job performance after training.

Responsibilities

  • Accurately perform process parameter checks and fill out the necessary documents for your assigned machines at start up.
  • Complete assigned mold changes in a timely and accurate fashion as posted on machine.
  • Perform start-ups in a timely and accurate fashion using proper procedures and paperwork.
  • Fill out mold repair sheets as required.
  • Ensure that all molds are clean and free of debris on the mating surfaces and all slides and leader pins are properly greased.
  • Work overtime as required by your supervisor to complete necessary tasks unless otherwise released by supervisor.
  • Effectively communicate with co-workers.
  • Maintain a clean and safe work environment.
  • Train new Process Technicians as required using current molding techniques.
  • Develop and document processes as required.
  • All jobs require a setup sheet for the machine they are running in.
  • New setup sheets must be verified ensuring that they meet set standards.
  • Perform samples of new and revised tools as required.
  • Trouble shoot processes as necessary to ensure efficient job performance.
  • Participate in 8D solving as required.
  • Participate in the Continuous Improvement program.

Skills

Mechanical aptitude
Ability to lift 50 lbs
Own tools

Education

Reading 7-9th grade
Math 8th grade

Job description

Are you interested in a career with Wright Plastic Products? If you’re hardworking and dedicated, you’ll fit right in. Whether you’re an Engineer working on plastic molding or just looking to learn a new trade, there may be a spot for you.

Position:Process Technician

Location: Madisonville, TN

Job Id:304

# of Openings:1

Plastic Injection Molding Process Technician

Wright Plastic Products has an opening for a 3rd shift Process Technician at our Madisonville, TN location.

Summary of Position Responsibilities:

Responsible for complete set-up/start-up of all assigned jobs. Will be able to repeat process, troubleshoot, and document set-up. Provide training to new process technicians. Ability to perform routine maintenance to production molds as required. Responsible to complete material handling duties when necessary.

Key Responsibilities:

Accurately perform process parameter checks and fill out the necessary documents for your assigned machines at start up.

Complete assigned mold changes in a timely and accurate fashion as posted on machine.

Perform start-ups in a timely and accurate fashion using proper procedures and paperwork.

  • Correctly fill out Parameter Sheet.
  • Correctly fill out Start-up Sheet
  • Ensure the press is capable of running to the standard cycle time.
  • Present first shot to the Q.A. for approval.
  • Keep track of all start-up scrap.
  • Clean up purgings when they are made.
  • Clean up any spilled material.
  • Clean up parts that are left from previous run.
  • Ensure that all parts are contained within the chutes and bins when the press is started.
  • Remove all unnecessary waterlines from the machine and hang them up in designated areas.
  • Wipe all grease prints off of the machines after the mold change is completed.
  • Flash, sticking sprues, water leaks, etc.

Fill out mold repair sheets as required.

  • Ensure that all molds are clean and free of debris on the mating surfaces and all slides and leader pins are properly greased.

Work overtime as required by your supervisor to complete necessary tasks unless otherwise released by supervisor.

Effectively communicate with co-workers.

  • Get line-up from previous shift and give line-up to oncoming shift. Communicate problems and activities to correct them.

Maintain a clean and safe work environment.

  • Remove all unused and unnecessary equipment from work sites and place in designated area.
  • Keep all spray cans in designated can holders. Loose spray cans must be kept in storage cabinets.

Train new Process Technicians as required using current molding techniques.

Develop and document processes as required.

  • All jobs require a setup sheet for the machine they are running in.
  • New setup sheets must be verified ensuring that they meet set standards.

Perform samples of new and revised tools as required.

  • Complete and turn in appropriate documentation to personnel designated on sample request.

Trouble shoot processes as necessary to ensure efficient job performance.

  • Use 6 – step method to verify the process is running within set guidelines.
  • Use methods that lead to permanent resolution.
  • Include appropriate personnel as required to determine course of action to permanently resolve a problem.

Participate in 8D solving as required.

  • Assist in developing means of permanent resolution to customer complaints.

Participate in the Continuous Improvement program.

  • Assist in developing and implementing suggested improvements.

Minimum Qualifications:

1.Reading 7 – 9th grade and math 8th grade to be determined by testing

4.Mechanical aptitude

5.Ability to lift up to 50 lbs.

6.Ability to supply own tools

7.Ability to obtain valid hi-lo license

8.Good performance record

9.Must be able to demonstrate competency through testing and job performance after training

Other Requirements:

PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to stand; climb or balance; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Wright Plastic Products offers competitive pay and benefits and a great work environment. We are family oriented; we care about our team members!

Thanks for your interest in joining the Wright Plastic team!

Sheridan, MI (Corporate)

201 Condensery Rd.
Sheridan, MI 48884
Phone: (989) 291-3211
Fax: (989) 291-5321

2021 Christian B. Haas
St. Clair, MI 48079
Phone: (810) 326-3000
Fax: (810) 326-5000

Madisonville, TN
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Technical Coordinator (Supervisor)
Technical Coordinator (Supervisor)

Wright Plastic Products • Madisonville (TN)

On-site
USD 65,000 - 85,000
Competitive pay and benefits
Process Technician Level I
Process Technician Level I

Clayens • Greeneville (TN)

On-site
USD 30,000 - 41,000
Process Technician Level I
Process Technician Level I

Clayens NP Group • Bolton Estates (TN)

On-site
USD 30,000 - 41,000
Process Technician 3rd shift (10 pm - 6 am)
Process Technician 3rd shift (10 pm - 6 am)

Wise Plastics Technologies • Illinois

On-site
USD 39,000 - 48,000
Sign-on bonus
Medical, dental, vision, life & short‑
401k with company match
+4
3rd Shift Plastic Process Technician - Molding
3rd Shift Plastic Process Technician - Molding

Wright Plastic Products • Madisonville (TN)

On-site
USD 38,000 - 52,000
Process Technician 3rd shift (10 pm - 6 am)
Process Technician 3rd shift (10 pm - 6 am)

Wise Plastics Technologies, Inc. • St. Charles (IL)

On-site
USD 39,000 - 48,000
Sign-on bonus
401k plan with company match
Paid time off
+5
Process Technician
Process Technician

Plastech Corporation • Rush City (MN)

On-site
USD 37,000 - 48,000
Health insurance
Dental insurance
Vision insurance
+3
Process Technician
Process Technician

Technical Response • Knoxville (TN)

On-site
USD 42,000 - 64,000
Process Technician
Process Technician

FMT • Findlay (OH)

On-site
USD 35,000 - 50,000
Process Technician (Injection Molding)
Process Technician (Injection Molding)

Shelby American, Inc. • Houston (TX)

On-site
USD 40,000 - 70,000