Process Technician

Technical Response

Knoxville (TN)

On-site

USD 42,000 - 64,000

Full time

8 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Technical Response seeks a hands-on Process Technician to support injection- and blow-molded plastic production in an automotive-driven environment. You will perform mold changes, verify equipment readiness, and monitor molding conditions, ensuring repeatable processes and quality parts.

The role emphasizes problem-solving, traceability, and continuous improvement, with clear communication across shifts. It is a technical individual-contributor position focused on safety, efficiency, and product

Qualifications

  • High school diploma or equivalent required.
  • At least two years of molding experience preferred; mechanical aptitude valued.
  • Experience with mold setup and injection molding equipment preferred.
  • Scientific molding training or certification preferred.
  • Basic knowledge of hydraulics, pneumatics, electrical systems, and automation.
  • Strong math, mechanical, communication, and problem-solving skills.

Responsibilities

  • Install and remove molds; connect services per safety procedures.
  • Complete setup verification and line clearance before startup.
  • Maintain approved molding conditions and document changes.
  • Troubleshoot process and quality problems; implement corrective actions.
  • Inspect parts for conformance and raise issues per procedures.
  • Follow daily production schedule and adapt to priorities.
  • Assist with material/color changes and verify readiness.
  • Program and troubleshoot robots; assemble EOAT as directed.
  • Troubleshoot hydraulic, pneumatic, electrical, and automation issues.
  • Perform basic mold/tool maintenance and report repairs needed.
  • Document process changes and shift activities for traceability.
  • Communicate machine status and unresolved issues during handoff.
  • Support uptime, scrap reduction, and continuous improvement.

Skills

Mechanical aptitude
Learning ability
Problem-solving
Communication skills

Education

High school diploma or equivalent
Two years of molding experience

Job description

JOB SUMMARY

The Process Technician supports safe, consistent, and efficient production of injection- and blow-molded plastic components in an automotive-driven manufacturing environment. This hands-on position calls for a motivated, mechanically inclined individual who is eager to learn, takes initiative, and approaches technical challenges with curiosity and accountability. The technician performs mold changes, verifies equipment readiness, establishes and monitors molding conditions, troubleshoots process and quality concerns, and accurately documents work to support repeatable, capable processes.

The successful candidate takes pride in producing consistent, conforming parts, responds constructively to changing production priorities, communicates clearly with teammates, and continually develops technical skills. An automotive quality mindset—including process discipline, traceability, defect containment, and continuous improvement— is essential. This is a technical individual-contributor role, not a supervisory position.

JOB DUTIES
  • Install and remove molds as required; connect and verify water, pneumatic, hydraulic, and electrical services using established safety procedures.
  • Complete setup verification, housekeeping, cleanup, and line clearance before production startup.
  • Establish, monitor, and adjust approved molding conditions within authorized limits to maintain stable, repeatable processes and conforming products; follow documented setup sheets and change-control requirements.
  • Investigate process and quality problems using structured troubleshooting and root cause analysis; implement or recommend corrective actions within assigned authority and verify their effectiveness.
  • Monitor production and inspect parts for visual, dimensional, and functional conformity; promptly identify, segregate, and elevate suspect product according to established quality procedures.
  • Follow the daily production schedule, adapt to changing priorities, and organize assigned work to minimize downtime.
  • Assist with material and color changes and verify that materials and auxiliary equipment are ready for production.
  • Program and troubleshoot robots as assigned; assemble and build end-of-arm tooling (EOAT) with appropriate guidance.
  • Troubleshoot hydraulic, pneumatic, basic electrical, and automation issues; check fuses, replace heater bands, or verify voltages only when trained and authorized.
  • Perform basic mold and tool maintenance, including cleaning, greasing, and inspection for wear; report conditions requiring repair.
  • Maintain setup sheets and accurately document process changes, adjustments, production issues, and shift activities to support traceability and repeatable production.
  • Communicate machine status, unresolved issues, and incomplete tasks during shift handoff.
  • Support machine uptime, scrap reduction, process capability, quality, safety, and continuous improvement through data-driven observation and follow-through.
  • Assist production operators as needed while maintaining assigned technician responsibilities.
  • Learn blow molding processes if not already proficient; actively pursue training in scientific molding, process capability, equipment, automation, and automotive quality expectations.
  • Follow applicable safety, environmental, quality, and Good Manufacturing Practice (GMP) requirements.
  • Perform other related duties as assigned.
  • Follow approved quality plans, work instructions, and customer-specific requirements applicable to assigned production jobs.
  • Support first-piece, startup, and ongoing process verification; maintain required production and inspection records.
  • Assist Quality and Engineering with defect investigations, corrective actions, and process capability studies (such as Cp/Cpk) as trained and assigned.
  • Perform other related duties as assigned.
Requirements
EDUCATION AND EXPERIENCE
  • High school diploma or equivalent required.
  • At least two years of relevant molding experience preferred; strong mechanical aptitude and demonstrated learning ability are valued.
  • Experience with mold setup, injection molding equipment, and troubleshooting preferred.
  • Scientific molding training or certification preferred.
  • Basic knowledge of hydraulics, pneumatics, electrical systems, and industrial automation.
  • Strong mathematical, mechanical, communication, and problem-solving skills.
WHAT SUCCESS LOOKS LIKE

A motivated Process Technician asks thoughtful questions, learns from feedback, takes ownership of assigned work, documents changes, communicates problems early, and follows tasks through to completion without bypassing safety or quality procedures. The technician understands the importance of first-time quality, stable processes, documented evidence, and prompt containment of defects. The technician collaborates with Production, Quality, Maintenance, Tooling, and Engineering and demonstrates the company core values: Character, Teamwork, and Continuous Improvement.

PHYSICAL REQUIREMENTS
  • Ability to sit, stand, squat, bend, and walk throughout shifts of up to 12 hours.
  • Ability to regularly lift up to 50 lbs. and occasionally handle heavier loads with appropriate assistance or lifting equipment.
  • Ability to work in small or confined spaces when properly trained and authorized.
  • Ability to read, write, and communicate effectively to carry out essential duties and safety instructions.
POSITION TYPE AND TRAVEL

Full-time position; extended hours and weekend work may be required. No routine travel is expected.

EQUAL OPPORTUNITY EMPLOYMENT

Technical Response is an equal opportunity employer. All applicants will be considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, disability, or other protected status.

Note: Duties may change as company needs evolve.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Process Technician
Process Technician

Technical Response, Inc. • Knoxville (TN)

On-site
USD 30,000 - 41,000
Process Technician (Injection Molding)
Process Technician (Injection Molding)

Texas Injection Molding • Houston (TX)

On-site
USD 28,000 - 39,000
Process Technician (Injection Molding)
Process Technician (Injection Molding)

Shelby American, Inc. • Houston (TX)

On-site
USD 40,000 - 70,000
Blow Mold Process Technician
Blow Mold Process Technician

Prysmian • Rockwall (TX)

On-site
USD 28,000 - 34,000
Process Technician
Process Technician

Revere Plastics Systems, LLC • Fraser (MI)

On-site
USD 28,000 - 41,000
Competitive hourly pay
Comprehensive benefits including high-
401(k) retirement plan
+4
Process Technician- Injection Mold
Process Technician- Injection Mold

Evenflo • Piqua (OH)

On-site
USD 42,000 - 65,000
Process Technician
Process Technician

Technimark • Latrobe

On-site
USD 30,000 - 41,000
Medical insurance (after 30 days)
Dental/vision insurance (after 30 days
401(k) with company match
+3
Process Technician
Process Technician

Brooks Utility Products • Tallapoosa (GA)

On-site
USD 25,000 - 39,000
Process Technician
Process Technician

All-Plastics, LLC • Kerrville (TX)

On-site
USD 48,000 - 64,000
Mold Setter/ Process Technician- 2nd Shift
Mold Setter/ Process Technician- 2nd Shift

TI Automotive • Leitchfield (KY)

On-site
USD 30,000 - 41,000