Process Engineer - Vision Systems

Amphenol Corporation; Yocumtown (PA); On-site; USD 90,000 - 130,000; Full time

Job summary

Amphenol Corporation seeks a Process Engineer - Vision Systems to lead global machine-vision and automated-inspection initiatives. Based in Valley Green, PA, you will own readiness, develop new inspection technologies, and deploy standardized solutions across CBS manufacturing sites.

You will define roadmaps for 2D/3D vision, AI-assisted inspection, and OCR/OCV, partnering with sites worldwide. Travel 30–50% to enable deployments and ramp production efficiently.

Qualifications

• Bachelor's degree in Electrical/Automation/Mechanical/Manufacturing or related field.
• 5+ years in machine-vision, automated inspection, or related areas preferred.
• Strong knowledge of cameras, lighting, and inspection algorithms.

Responsibilities

• Serve as CBS global technical process owner for machine-vision and inspection systems.
• Define vision-technology roadmap and evaluate 2D/3D vision and AI inspection.
• Translate requirements into measurable inspection specs and criteria.
• Develop robust vision solutions with cameras, lighting, and software.
• Deploy repeatable factory solutions globally via specifications and validation.
• Own vision-system readiness through EVT/DVT/PVT and ramp phases.
• Lead GR&R, validation, and production correlation studies.
• Develop scalable inspection platforms and architectures.
• Integrate vision with PLCs, robots, MES, and data systems.
• Lead global deployment, training, and site enablement.

Skills

Machine-vision

Inspection

Automation

Troubleshooting

Cross-site coaching

Vision-system integration

Education

Bachelor's degree in Engineering

Tools

Cognex

Keyence

Omron

Halcon

OpenCV

Job description

Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive.

Position: Process Engineer - Vision Systems
Location: Valley Green, Pennsylvania (Global Travel)

Amphenol High Speed Products Group is the market leader for high-speed, high-bandwidth electrical connectors and cable assemblies for the Telecom/Datacom market, including AI infrastructure, data centers, storage, servers, routers, and switches. Our products enable the electronics revolution and support major Tier 1 OEMs globally. We have design, sales, engineering, and manufacturing locations worldwide and are currently seeking an NPI Engineer - Vision Systems to join our Cable Backplane Systems (CBS) Global NPI organization based in Valley Green, Pennsylvania. This role serves as the global process specialist for machine-vision and automated-inspection technologies, with ownership for process readiness, new technology development, factory deployment, standardization, and technical governance across CBS manufacturing sites.

RESPONSIBILITIES

• Serve as the CBS global technical process owner for machine-vision and automated-inspection systems, responsible for inspection strategy, technology development, process readiness, validation, standardization, deployment, and sustained capability across global manufacturing sites.
• Define the machine-vision technology roadmap and evaluate new 2D/3D vision, structured-light/profilometry, AI/deep-learning inspection, OCR/OCV, measurement, and defect-detection technologies where they provide clear manufacturing value.
• Translate drawings, CTQs/CTFs, PFMEA/control-plan risks, cosmetic criteria, dimensional requirements, defect modes, and traceability needs into measurable inspection requirements, challenge criteria, and system acceptance specifications.
• Develop robust vision solutions by optimizing cameras, lenses, lighting, sensors, part presentation, fixturing, algorithms, recipes, image processing, and system logic for expected product and process variation.
• Convert proven inspection concepts into repeatable factory solutions and deploy them globally through technical specifications, integrator development, FAT/SAT, MSA/correlation, site qualification, training, controlled release, and ramp support.
• Process Readiness & NPI Governance - Own vision-system readiness through prototype, EVT, DVT, PVT, qualification, pilot, and MP ramp. Define phase-gate criteria for inspection requirements, hardware/software readiness, recipes, challenge samples, MSA, data capture, reject logic, documentation, training, and production support.
• Measurement-System Development & Validation - Establish validation methods for repeatability, reproducibility, correlation, detection capability, false-accept/false-reject performance, robustness, and sensitivity to expected process variation. Lead GR&R, challenge-sample studies, golden/reference sample strategy, and production correlation.
• New Technology & Platform Development - Develop scalable inspection platforms and common architectures for cameras, optics, lighting, 2D/3D sensing, AI/deep learning where appropriate, controllers, computing, edge processing, and inspection software; evaluate emerging technologies through structured trials before deployment.
• Automation, Controls & Data Integration - Integrate vision systems with PLCs, robots, motion, reject mechanisms, alarms, MES/traceability, serial-number genealogy, image/data storage, process interlocks, and equipment-control logic so inspection results drive reliable manufacturing decisions.
• Global Factory Deployment & Site Enablement - Lead technical deployment into CBS factories, including design review, installation readiness, commissioning, FAT/SAT closure, site correlation, production qualification, engineer/technician training, troubleshooting, and stabilization through MP ramp.
• Standardization & Technical Governance - Define approved hardware/software architectures, camera/lens/lighting selection methods, programming practices, inspection-development standards, recipe/version control, backup/recovery, access control, MSA requirements, change control, documentation, and technical approval criteria for major system changes.
• Site Team Development & Technical Escalation - Act as the global subject-matter expert for vision systems; coach site engineers, build local troubleshooting and programming capability, support difficult escape/over-reject investigations, and provide technical escalation for system, algorithm, lighting, fixturing, or integration limitations.
• Supplier / Integrator Management - Develop URS and acceptance criteria for vision integrators and equipment suppliers; lead technical reviews, concept selection, feasibility trials, FAT/SAT, performance-gap closure, commissioning, lifecycle support, and future-platform development.
• Continuous Improvement & Knowledge Management - Improve detection robustness, measurement capability, cycle time, false-reject rate, uptime, maintainability, data quality, and reuse of common solutions. Capture lessons learned and convert successful applications into reusable standards, libraries, troubleshooting guides, and training content.

QUALIFICATIONS

• Bachelor's degree in Electrical, Automation, Computer, Mechanical, Manufacturing Engineering, Mechatronics, or a related technical field.
• 5+ years of hands-on machine-vision, automated inspection, metrology, industrial image-processing, or vision-system integration experience is strongly preferred.
• Strong knowledge of cameras, optics, lenses, lighting, 2D/3D sensing, image processing, part presentation, fixturing, inspection algorithms, industrial communications, and production-environment robustness.
• Experience with Cognex, Keyence, Omron, Halcon, OpenCV, or similar platforms; exposure to AI/deep-learning inspection or 3D metrology technologies is a plus.
• Demonstrated experience with measurement-system analysis, GR&R, correlation, challenge samples, false-accept/false-reject studies, SPC, and validation of automated inspection systems.
• Experience integrating vision with PLCs, robots, automated equipment, MES, traceability/genealogy, databases, and production-control logic is strongly preferred.
• Strong hands-on troubleshooting, technical documentation, supplier/integrator management, training, and cross-site coaching skills; ability to influence global teams without direct authority.
• Experience in electronics, connectors, cable assembly, precision assembly, or other high-volume manufacturing environments is preferred.
• Travel - Approximately 30-50% domestic and international travel, with increased travel during technology development, factory deployments, qualifications, and major production ramps.

Amphenol Corporation is proud of our reputation as an excellent employer. Our focus is to provide the highest level of support and responsiveness to both our employees and our customers, the world's largest technology companies. Amphenol Corporation offers the opportunity for career growth within a global organization. We believe that Amphenol Corporation is unique in that every employee, regardless of his or her position, has the ability to positively impact the business.

Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin.