Principal Flight Controls Engineer

DevHub, Inc.

New Jersey

On-site

USD 160,000 - 260,000

Full time

2 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

BCBS medical coverage
401(k) with company match
Paid parental leave
On-site gym (Huntsville, AL) and field
Life insurance
Employee Assistance Program (EAP)
Generous PTO and flexible leave

Job summary

Performance Drone Works (PDW) in Burlington, MA, seeks a Principal Flight Controls Engineer to own multirotor flight-control performance and the production C++ software that delivers it. You will combine deep control theory with hands-on software, taking controllers from modeling and tuning through embedded implementation and flight validation.

You will lead and mentor across controls and software teams, focusing on flight performance, controller tuning, and reliable production software while

Qualifications

  • Minimum 10 years of relevant experience or equivalent contributions.
  • Expertise in multirotor flight-controls and flight-validated systems.
  • Strong foundation in classical and modern control theory, stability analysis, and discrete-time control.
  • Extensive production C++ experience with architecture, debugging, testing, and optimization.
  • Experience deploying real-time embedded control software with timing constraints and sensor integration.
  • Hands-on experience with multirotor dynamics, system identification, tuning, and flight-data analysis.
  • Understanding of state estimation interfaces and sensor fusion.
  • Proven technical leadership, mentoring, and cross-functional collaboration.
  • Bachelor-level or higher in engineering or computer science, or equivalent.

Responsibilities

  • Own flight-control requirements and architecture from rate/attitude to trajectory tracking.
  • Develop 6-DoF models using system identification and validate against flight data.
  • Tune controllers for accuracy, responsiveness, stability, and disturbance rejection.
  • Own production C++ flight-control software including architecture, embedded implementation, testing, and maintenance.
  • Lead simulation and flight testing against measurable performance and safety criteria.
  • Develop control allocation and failure-handing strategies for faults and saturation.
  • Collaborate across autonomy, software, and hardware teams on interfaces.
  • Analyze flight logs to diagnose issues and refine tuning.
  • Lead design and code reviews and mentor engineers.

Skills

Multirotor flight-controls
Production C++
Control theory
System identification
Embedded real-time software
MATLAB/Simulink
Python
Git
CMake
CI/CD
Trajectory optimization
Leadership & mentoring

Education

Bachelor's degree (aerospace/electrical/mechanical or related)

Tools

Embedded Linux
RTOS
Git
CMake
Python

Job description

Now, we’re entering a new phase of growth and are looking for a a Principal Flight Controls Engineer in Burlington, MA, to own multirotor flight-control performance and the production C++ software that delivers it. You will combine deep control theory expertise with hands‑on software development, taking controllers from modeling and tuning through embedded implementation and flight validation. This is a hands‑on individual contributor role with technical leadership and mentoring responsibilities. Your primary focus will be flight performance, controller tuning, and reliable production software. You will set technical direction and mentor engineers across controls and software development.

What You Will Do
  • Own multirotor flight-control requirements and architecture, from rate and attitude control to position and trajectory tracking.
  • Develop six-degree-of-freedom models using system identification; validate predictions against flight data.
  • Tune controllers for tracking accuracy, responsiveness, stability, and disturbance rejection across the operating envelope.
  • Own production C++ flight-control software, including architecture, embedded implementation, testing, and mai ntenance.
  • Lead simulation and flight testing against measurable performance and safety criteria.
  • Develop control allocation and failure-handling strategies for actuator saturation, sensor faults, and degraded operation.
  • Collaborate across autonomy, software, and hardware teams on interfaces and system behavior.
  • Analyze flight logs to diagnose issues, refine tuning, and verify performance improvements.
  • Lead design and code reviews, document technical decisions, and mentor engineers.
Requirements
  • 10+ years of relevant experience or equivalent technical contributions.
  • Expertise in multirotor flight-controls and a record of delivering flight-validated systems.
  • Strong foundation in classical and modern control theory, stability analysis, and discrete-time control.
  • Extensive production C++ experience, including architecture, debugging, automated testing, and performance optimization.
  • Experience deploying real-time embedded control software, including timing constraints, actuator limits, and numerical precision.
  • Hands‑on expertise in multirotor dynamics, system identification, controller tuning, and flight-data analysis.
  • Understanding of state estimation interfaces, coordinate frames, sensors, and their effects on control performance.
  • Proven technical leadership, cross‑functional problem solving, mentoring, and communication skills.
  • Bachelor's degree in aerospace, electrical, or mechanical engineering, computer science, or a related field; or equivalent experience.
  • Preferred Experience with trajectory optimization or nonlinear optimization.
  • Applied nonlinear, robust, adaptive, or model predictive control experience.
  • Familiarity with state estimation, sensor fusion, inertial navigation, or degraded positioning.
  • Experience with embedded Linux, real-time operating systems, or production autopilot software.
  • Proficiency with MATLAB/Simulink or Python; familiarity with Git, CMake, and continuous integration.
  • Experience using field-test results and operator feedback to improve systems.
Physical Requirements

The physical demands described here are representative of those that must be met to successfully perform the essential functions of the job. Ability to sit, stand, bend, reach, climb, and move about regularly throughout the day and lift / carry up to 25 pounds. Must have manual dexterity to operate standard office equipment as well as various electronic power supplies and test equipment. Must be physically capable of the assigned duties.

The physical demands described here are representative of those that must be met to successfully perform the essential functions of the job. Ability to sit, stand, bend, reach, climb, and move about regularly throughout the day and lift / carry up to 25 pounds. Must have manual dexterity to operate standard office equipment as well as various electronic power supplies and test equipment. Must be physically capable of the assigned duties.

Work Environment

Based in Burlington, MA, with office, lab, and field work and occasional travel. The physical demands described here are representative of those that must be met to successfully perform the essential functions of the job. Ability to sit, stand, bend, reach, climb, and move about regularly throughout the day and lift / carry up to 25 pounds. Must have manual dexterity to operate standard office equipment as well as various electronic power supplies and test equipment. Must be physically capable of the assigned duties.

This position typically operates in a standard office and requires use of standard office and may require occasional travel to customer locations or facilities. This position may have exposure to outdoor weather conditions, noise, and non-climate-controlled environments. May require the use of personal protective equipment (PPE) depending on the environment. This is a fast-paced work environment and requires cross-functional collaboration with independent and team-based responsibilities.

ITAR Requirement

In compliance with International Traffic Arms Regulations (ITAR), candidates must be U.S. Citizens, U.S. Permanent Residents (Green Card holders) or individuals granted asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3).

Benefits
  • Benefits include: Comprehensive BCBS medical, dental, and vision coverage; 80% sponsored by the company.
  • Safe Harbor 401(K) with company match.
  • Paid Parental Leave.
  • On-site gy m at Huntsville, AL & Denver, CO locations.
  • Employer provided life insurance.
  • Robust Employee Assistance Program (EAP).
  • A work environment that encourages teamwork and innovation.
  • Competitive salary, generous paid time off (PTO), and flexible leave options.
EEO Statement

PDW is an equal opportunity employer that upholds all federal and state non-discrimination laws. We ensure a fair and unbiased evaluation for employment for all qualified candidates regardless of race, color, religion, age, sex, sexual orientation, gender identity, national origin, marital status, medical condition, disability, genetic information, veteran status, or any other characteristic protected by law.

Performance Drone Works (PDW) is building the next generation of tactical robotic systems used across defense, national security, and public safety missions. We are building a new center of engineering excellence to design our new category of tactical robotic systems and the industrial capacity to deliver them, bringing decisive airpower into the hands of every operator. We are not here to make promises; we are here to deliver real systems with real capabilities for real missions. You will join a team of operators, engineers, and builders who solve hard problems with humility and focus. We design and produce multi-mission aerial systems that operators trust to perform in real-world conditions, reliably, repeatedly, and at scale. Our approach is grounded in operator-centered design, rapid iteration from field use, and U.S.-based manufacturing. We operate by a clear set of values: Mission First, Aim Farther, Own It, Win Together. This is how we build advantage and how we help protect our service members, our communities, and our country.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Principal Flight Controls Engineer
Principal Flight Controls Engineer

PDW • Burlington (MA)

On-site
USD 160,000 - 230,000
Health coverage (BCBS)
401(k) with company match
Employer-provided life insurance
+2
Senior Embedded Software Engineer
Senior Embedded Software Engineer

PDW • Huntsville (AL)

On-site
USD 90,000 - 120,000
Comprehensive medical, dental, and vision coverage
Safe Harbor 401(K) with company match
Paid Parental Leave
+2
Associate Software Engineer
Associate Software Engineer

PDW • Burlington (MA)

On-site
USD 90,000 - 120,000
Comprehensive BCBS medical, dental, &/
Safe Harbor 401(K) with company match
Employer provided life insurance
+2
Senior Electrical Engineer
Senior Electrical Engineer

PDW • Huntsville (AL)

On-site
USD 110,000 - 160,000
Medical coverage
401K with match
Parental leave
+3
Senior Software Engineer, Manufacturing Systems
Senior Software Engineer, Manufacturing Systems

Squadra • Huntsville (AL)

On-site
USD 140,000 - 190,000
Medical coverage
401(K) plan
Parental leave
+3
Senior Software Engineer
Senior Software Engineer

PDW • Huntsville (AL)

On-site
USD 90,000 - 130,000
Medical benefits
401(k) with company match
Life insurance
+2
Staff Systems Engineer
Staff Systems Engineer

PDW • Denver (CO)

On-site
USD 180,000 - 225,000
Comprehensive BCBS medical, dental, &
Senior Field Software Engineer, Advanced Missions Group
Senior Field Software Engineer, Advanced Missions Group

PDW • United States

Remote
USD 140,000 - 190,000
Medical coverage
Dental coverage
Vision coverage
+3
Senior Electrical Engineer
Senior Electrical Engineer

Hardware FYI • Huntsville (AL)

On-site
USD 90,000 - 130,000
Medical, dental, vision coverage
401(K) with company match
Parental leave
+4
Senior Electronics Manufacturing Engineer
Senior Electronics Manufacturing Engineer

PDW • Huntsville (AL)

On-site
USD 95,000 - 135,000
Medical, dental, vision coverage
401(k) with company match
Paid parental leave
+2