Press Operator - 1st Shift

Mayfran International Inc; Cleveland (OH); On-site; USD 33,000 - 36,000; Full time

Benefits offered by this job

Benefits effective day one

2 weeks' vacation

Free on-site health clinic

On-site fitness center

401(k) with matching

Job summary

Mayfran International in Mayfield, Ohio is hiring a Press Operator to perform blanking, punching, piercing, and notching on heavy sheet metal parts. You will set up dies, monitor safety guards, run trials, and feed parts into the press according to specifications.

Daily duties include inspection with micrometers and calipers, adjusting tooling for accuracy, and maintaining a clean, organized work area. On-site benefits apply; starting wage is competitive with a 90-day increase.

Qualifications

• Use decimals, fractions and basic arithmetic.
• Over 1 to 3 years of qualifying experience or equivalent education and experience.

Responsibilities

• Set up and adjust die to provide for type of operation desired.
• Make certain die, stops and guides are correctly positioned; all safety guards are in place with dies and guards secured.
• Make trial run to ensure correctness of settings.
• Feed parts into press manually or from coil, position in die against gauges, pins or other positioning according to die and operation.
• Engage switches or buttons to activate and make machine cycle.
• Remove part from machine and stack in/on appropriate pallet or tote bin.
• Clear away scrap buildup to scrap hopper.
• Visually check parts periodically to ensure adherence to job specifications.
• Inspect parts with mics, calipers, and functional, plus and snap gauges in accordance with all specified quality requirements.
• Use floor controlled overhead crane equipment as necessary to move parts and materials; use care to lift and balance loads properly; operate equipment in a safe manner.

Skills

Attendance/Punctuality

Quality

Quantity

Problem Solving

Dependability

Planning/Organizing

Technical Skills

Interpersonal Skills

Teamwork

Organizational Support

Judgment

Motivation

Professionalism

Adaptability

Initiative

Diversity

Ethics

Oral Communication

Written Communication

Math

Safety and Security

Education

Experience in metal stamping/manufacturing

Job description

Description

Starting rate: $24.99. this position is eligible for a 90-day performance increase.

Rate after 90-Days: $25.83

Shift: 1st (6:30 AM - 3:00 PM)

Benefits effective day one, 2 weeks' vacation, free on-site health clinic, on-site fitness center, and 401(k) with matching.

Mayfran International is located in Mayfield, Ohio

Who We Are at Mayfran International

Mayfran International is the world’s leading provider of material handling, coolant filtration, chip processing and recycling systems, with a focus on engineering and innovation.

The Mayfran name has been synonymous with quality throughout our history. Our products are designed for the most challenging applications in aerospace, automotive, energy, medical, heavy equipment and other specialized industries. Our recycling solutions include equipment for metal scrap management, aluminum scrap separation, chip handling and more. We are also well known for our lifetime commitment to service and genuine aftermarket parts replacement guarantee. Customers know that working with Mayfran is about more than a product, it’s a relationship and an investment.

As a part of the Tsubaki Group—a global leader in motion control products for over 100 years—we’re committed to advancing the art of moving. Mayfran is committed to staying one step ahead, helping you succeed in ever-changing industries and an evolving marketplace.

Culture

Employees at Mayfran are part of a team and work in a positive environment that is geared toward helping everyone succeed. We value each team member for the skills they provide, their hard work and dedication. We treat every team member with warmth and respect and embrace their differences, cultures, customs and beliefs.

Sustainability

Mayfran strives to achieve sustainable growth by committing to corporate social responsibilities while recognizing its duty to contribute to society with ethical, sustainable business practices.

We are tackling a variety of issues to promote sustainability in the short, medium and long terms. We prioritize material issues and set strict sustainability targets at the corporate level to ensure that our commitment to corporate sustainability does not waver.

Summary: Performs a variety of blanking, punching, piercing, and notching and similar press operations on a variety of heavy sheet metal parts.

ESSENTIAL FUNCTIONS INCLUDE THE FOLLOWING. OTHER DUTIES MAY BE ASSIGNED:

• Work from established practices, work orders, verbal and written instructions.
• Set up and adjust die to provide for type of operation desired.
• Make certain die, stops and guides are correctly positioned; all safety guards are in place with dies and guards secured.
• Make trial run to ensure correctness of settings.
• Feed parts into press manually or from coil, position in die against gauges, pins or other positioning according to die and operation.
• Engage switches or buttons to activate and make machine cycle.
• Remove part from machine and stack in/on appropriate pallet or tote bin.
• Clear away scrap buildup to scrap hopper.
• Visually check parts periodically to ensure adherence to job specifications.
• Stop run and make necessary adjustments.
• Setup guards, light curtains, and programming of tonnage monitors.
• Attach completed tag or inventory cards, signed and dated, to stock production parts.
• Inspect parts with mics, calipers, and functional, plus and snap gauges in accordance with all specified quality requirements.
• Complete stock order reports.
• Use floor controlled overhead crane equipment as necessary to move parts and materials; use care to lift and balance loads properly; operate equipment in a safe manner.
• Exercise proper care in the use of tools, equipment and materials.
• Detect and report faulty equipment, defective material, improper operations and unusual conditions to supervision.
• Maintain work area in a neat and orderly condition.

Requirements

Competencies: To perform the job successfully, an individual should demonstrate the following competencies:

• Attendance/Punctuality - Is consistently at work and on time; Arrives at meetings and appointments on time.
• Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality.
• Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity.
• Problem Solving - Identifies and resolves problems in a timely manner; Works well in group problem solving situations.
• Dependability - Follows instructions, responds to management direction.
• Planning/Organizing - Uses time efficiently.
• Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others.
• Interpersonal Skills - Focuses on solving conflict, not blaming.
• Teamwork - Gives and welcomes feedback; Supports everyone's efforts to succeed.
• Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values.
• Judgment - Exhibits sound and accurate judgment; Includes appropriate people in decision-making process.
• Motivation - Measures self against standard of excellence.
• Professionalism - Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions.
• Adaptability - Able to deal with frequent change, delays, or unexpected events.
• Initiative - Looks for and takes advantage of opportunities; Asks for and offers help when needed. Generates suggestions for improving work.
• Diversity - Shows respect and sensitivity for cultural differences; promotes a harassment-free environment.
• Ethics - Keeps commitments; Works with integrity and ethically; Upholds organizational values.
• Oral Communication - Listens and gets clarification; Responds well to questions.
• Written Communication - Able to read and interpret written information.
• Math - Must have basic knowledge of shop math.
• Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly.

QUALIFICATIONS

KNOWLEDGE: Use decimals, fractions and other ordinary arithmetic. Requires interpretation to adhere to requirements.

EDUCATION/EXPERIENCE: Over 1 and up to 3 years of previous qualifying experience or equivalent combination of education and experience.

The specific statements shown in each section of this description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job. At the employee’s request, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.