Pipefitter - Field

Maxair Mechanical

Duluth (GA)

On-site

USD 39,000 - 55,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Maxair Mechanical is seeking an experienced HVAC Pipefitter/Welder to install, fabricate, and service commercial piping systems across chilled/hot water, steam, condensate, refrigerant, and process lines. You will cut, weld, braze, solder, and assemble using carbon steel, copper, stainless steel, PVC, and CPVC, while ensuring accuracy in measurements and layouts.

The role requires 3–5+ years of HVAC piping experience, blueprints literacy, and a valid driver’s license.

Qualifications

  • High school diploma or GED preferred.
  • 3-5+ years of commercial or industrial HVAC/mechanical pipefitting experience.
  • Strong knowledge of HVAC piping systems, materials, and installation practices.
  • Ability to read and interpret blueprints, isometrics, schematics, and specifications.
  • Experience with brazing, soldering, threading, grooving, and welding.
  • Valid driver's license with acceptable driving record.
  • Ability to pass applicable welding tests and certifications required by the company.

Responsibilities

  • Install, fabricate, assemble, modify, and repair commercial HVAC piping systems.
  • Install chilled water, hot water, steam, condensate, refrigerant, gas, condenser water, and process piping systems.
  • Fabricate and assemble piping using carbon steel, copper, stainless steel, PVC, and CPVC.
  • Cut, thread, groove, braze, solder, weld, and assemble pipe and fittings.
  • Install pipe supports, hangers, anchors, vibration isolation, valves, strainers, pumps, coils, and related equipment.
  • Verify measurements, elevations, slopes, clearances, and layout requirements.
  • Diagnose piping failures, leaks, equipment issues, and system deficiencies.
  • Perform piping repairs, modifications, tie-ins, shutdowns, and equipment replacements.
  • Replace valves, fittings, and damaged pipe sections.
  • Troubleshoot flow, pressure, temperature, and system performance issues.
  • Support HVAC service technicians during major repairs and equipment replacements.
  • Perform hydrostatic and pneumatic pressure testing.
  • Inspect work for leaks, alignment, support, and code compliance.
  • Assist with flushing, cleaning, startup, and commissioning activities.
  • Verify system operation after repairs and modifications.
  • Follow all company safety policies, OSHA requirements, and customer safety procedures.
  • Complete Job Hazard Analyses (JHAs) and participate in safety meetings.
  • Properly maintain tools, welding equipment, and company vehicles.
  • Ensure all work meets applicable codes, specifications, manufacturer requirements, and company quality standards.
  • Communicate professionally with customers, project managers, foremen, and team members.
  • Complete service reports, time sheets, and material usage records accurately.
  • Assist with estimating repair work and identifying additional service opportunities.
  • Represent the company in a professional manner at all times.

Skills

HVAC piping systems
Welding & brazing
Blueprints & isometrics
Safety compliance
Teamwork

Education

High school diploma or GED
OSHA 10/30
AWS/ASME welding certifications
Trade school or apprenticeship

Tools

Welding tests
Pipefitting tools

Job description

Job Description

Job DescriptionDescription:

Reports To

Service Manager

Position Summary

The HVAC Service Pipefitter/Welder is responsible for the installation, fabrication, assembly, modification, repair, and maintenance of commercial and industrial HVAC piping systems. This role performs pipefitting, welding, brazing, soldering, and mechanical service work on chilled water, hot water, condenser water, steam, condensate, refrigerant, gas, and process piping systems. The technician works independently and with service teams to safely diagnose issues, execute repairs, and deliver high-quality workmanship that exceeds customer expectations.

Essential Duties and Responsibilities
Pipefitting and Fabrication
  • Install, fabricate, assemble, modify, and repair commercial HVAC piping systems.
  • Install chilled water, hot water, steam, condensate, refrigerant, gas, condenser water, and process piping systems.
  • Fabricate and assemble piping using carbon steel, copper, stainless steel, PVC, and CPVC.
  • Cut, thread, groove, braze, solder, weld, and assemble pipe and fittings.
  • Install pipe supports, hangers, anchors, vibration isolation, valves, strainers, pumps, coils, and related equipment.
  • Verify measurements, elevations, slopes, clearances, and layout requirements.
Service and Repair
  • Diagnose piping failures, leaks, equipment issues, and system deficiencies.
  • Perform piping repairs, modifications, tie-ins, shutdowns, and equipment replacements.
  • Replace valves, fittings, and damaged pipe sections.
  • Troubleshoot flow, pressure, temperature, and system performance issues.
  • Support HVAC service technicians during major repairs and equipment replacements.
Testing and Commissioning
  • Perform hydrostatic and pneumatic pressure testing.
  • Inspect work for leaks, alignment, support, and code compliance.
  • Assist with flushing, cleaning, startup, and commissioning activities.
  • Verify system operation after repairs and modifications.
Safety and Compliance
  • Follow all company safety policies, OSHA requirements, and customer safety procedures.
  • Complete Job Hazard Analyses (JHAs) and participate in safety meetings.
  • Properly maintain tools, welding equipment, and company vehicles.
  • Ensure all work meets applicable codes, specifications, manufacturer requirements, and company quality standards.
Customer Service and Documentation
  • Communicate professionally with customers, project managers, foremen, and team members.
  • Complete service reports, time sheets, and material usage records accurately.
  • Assist with estimating repair work and identifying additional service opportunities.
  • Represent the company in a professional manner at all times.
Knowledge, Skills, and Abilities
  • Strong understanding of HVAC mechanical systems.
  • Proficiency in pipe layout, fabrication, installation, and repair.
  • Knowledge of pipe stress, support requirements, and system alignment.
  • Ability to troubleshoot mechanical and piping system issues.
  • Strong welding, brazing, and soldering skills.
  • Ability to identify and resolve field installation conflicts.
  • Strong communication, customer service, and teamwork skills.
  • Ability to work independently with minimal supervision.
Physical Requirements
  • Lift and carry up to 75 pounds.
  • Climb ladders and work at heights.
  • Work in confined spaces, rooftops, mechanical rooms, and construction environments.
  • Stand, kneel, crouch, bend, and work overhead for extended periods.
  • Work outdoors in varying weather conditions.
Work Environment
  • Commercial and industrial construction and service environments.
  • Mechanical rooms, rooftops, manufacturing facilities, and occupied buildings.
  • Exposure to noise, dust, temperature extremes, and jobsite hazards.
Requirements:
Required Qualifications
  • High school diploma or GED preferred.
  • 3-5+ years of commercial or industrial HVAC/mechanical pipefitting experience.
  • Strong knowledge of HVAC piping systems, materials, and installation practices.
  • Ability to read and interpret blueprints, isometrics, schematics, and specifications.
  • Experience with brazing, soldering, threading, grooving, and welding.
  • Valid driver's license with acceptable driving record.
  • Ability to pass applicable welding tests and certifications required by the company.
Preferred Qualifications
  • Trade school or apprenticeship completion.
  • OSHA 10 or OSHA 30 certification.
  • AWS, ASME, or equivalent welding certifications.
  • Experience in commercial and industrial HVAC projects.
  • Steam system and refrigerant piping experience.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Pipefitter - Field
Pipefitter - Field

Maxair Mechanical, Inc. • Duluth (GA)

On-site
USD 34,000 - 55,000
Pipefitter - Field
Pipefitter - Field

Karachaganak Petroleum Operating B.V. (KPO) • Duluth (GA)

On-site
USD 50,000 - 70,000
Pipefitter Welder
Pipefitter Welder

Capstone Mechanical, LP. • Fort Myers (FL)

On-site
USD 50,000 - 70,000
Service Fitter
Service Fitter

Maxair Mechanical, Inc. • Newnan (GA)

On-site
USD 55,000 - 85,000
Pipefitter
Pipefitter

Stellantis NV • Kokomo (IN)

On-site
USD 30,000 - 47,000
Journeyman Pipefitter
Journeyman Pipefitter

A/Z CORPORATION • North Kingstown (RI)

On-site
USD 65,000 - 85,000
PIPEFITTER II
PIPEFITTER II

TP Mechanical • Cincinnati (OH)

On-site
USD 34,000 - 55,000
Service Fitter
Service Fitter

Karachaganak Petroleum Operating B.V. (KPO) • Newnan (GA)

On-site
USD 34,000 - 55,000
Pipefitter
Pipefitter

Stellantis NV • Detroit (MI)

On-site
USD 34,000 - 52,000
Pipefitter
Pipefitter

Therma-Tron-X, Inc. (TTX®) • Sturgeon Bay (WI)

On-site
USD 55,000 - 80,000