Pipe Welder

Viewpoint, Inc.; Georgetown (SC); On-site; USD 42,000 - 68,000; Full time

Job summary

Thompson Construction Group, Inc. is seeking an experienced welder to lay out, fit, and weld fabricated components across multiple site locations.

The role requires precision welding, adherence to blueprints, and strict safety practices to deliver high-quality structural welds. The ideal candidate will perform welding in various positions, inspect welds for quality, and maintain equipment and tools while supporting a diverse range of projects.

Qualifications

• Must be able to TIG and stick weld on stainless and/or carbon (pipe size and material welded varies per site).
• Must pass required weld tests (varies per site).
• Must wear safety gear and follow safety procedures.
• Must be able to read, write and communicate clearly with supervisor and co-workers.

Responsibilities

• Lay out, position, align, and secure parts and assemblies prior to assembly.
• Weld together metal components per blueprints or instructions using specified welding processes.
• Examine welds for bead size and conformance with specifications.
• Prepare broken parts for welding and repair as needed.
• Maintain safety and project rules on site.
• Perform other duties as assigned.

Skills

TIG welding

Stick welding

Reading blueprints

Safety compliance

Mathematical reasoning

Tools

TIG Rig & Stinger

Welding helmet & protective gear

Gas-Metal Arc welding

Flux-Cored Arc welding

Shielded-Metal Arc welding

Job description

Position Description

Since its foundation in 1986, Thompson Construction Group, Inc. has grown from a small, local company into one of the largest privately held companies based in South Carolina. Our diverse services portfolio includes capital projects, power services, maintenance services, disaster recovery, hydro consulting, and commercial construction. We believe in investing in our employees to help them reach their professional goals, as well as their personal goals. Thompson promotes a work environment that fosters learning, leadership, and development, along with a safety culture that never waivers. Thompson is headquartered in Sumter, South Carolina, with offices spanning the United States, primarily the southeast and central United States.

Position Description

Lay out, fit, and weld fabricated, cast, and forged components to assemble structural forms. This will be completed in a safe and timely manner with the highest quality possible.

Job Responsibilities

• Lay out, position, align, and secure parts and assemblies prior to assembly.
• Examine work pieces for defects and measure work pieces to ensure conformance with specifications.
• Weld together metal components of products such as piping systems, plate, pipe and tube or structural shapes, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment.
• Obtain specified electrode and insert electrode into portable holder or thread consumable electrode wire through portable welding gun.
• Connect cables and adjust welding unit to obtain amperage, voltage, polarity, and pulse, as specified by welding procedure or supervisor.
• Start power supply to produce electric current.
• Strike (form) arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece.
• Manually guide electrode or gun along weld-line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle.
• Weld in flat, horizontal, vertical, or overhead positions.
• Examine weld for bead size and other specifications.
• May manually apply filler rod to supply weld metal.
• May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes.
• May prepare broken parts for welding by grooving or scarfing surfaces.
• May remove excess weld, defective weld material, slag, and spatter, using carbon arc gouge, hand scraper, grinder or power chipper.
• May preheat work piece, using hand torch or heating furnace.
• May position and clamp work piece together or assemble then in a jig or fixture.
• May tack weld assemblies together.
• May cut metal plates or structural shapes.
• May fit up parts (pipe, tube, structural shapes, or plate) and inspect fit before welding.
• May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded-Metal Arc welding processes.
• Respiratory protection is common and may be required.
• Responsible for observing and complying with all safety and project rules.
• Other duties as assigned.

Position Requirements

• Must be at least 18 years of age.
• Must be able to TIG and stick weld on stainless and/or carbon (pipe size and material welded varies per site).
• Must pass required weld tests (varies per site).
• Must be willing to work outside craft.
• Workers are surrounded by hot materials and strong light.
• Must wear safety gear, including protective goggles, masks, face shields and safety shoes.
• Must be able to read, write and communicate clearly with supervisor/co-workers and understand direction from supervisor.
• Utilize basic math and a calculator to solve geometric problems associated with Instrument Fitting.
• May be required to work outside and be subject to severe weather as well.
• Employee must be able to climb, bend, twist, stand and reach repetitively, operate moving equipment and work in hot/cold/damp/cramped environments.
• Candidate may be required to pass a drug test and criminal background check based on job location/requirements.
• Required Tool List For Pipe Welder:
• Must have own TIG Rig and Stinger
• 1 each 12” Crescent Wench
• 1 each Stinger (whip) for Stick Welding
• 1 each Tig Rig w/Hose and Gauges
• 1 each 25’ Tape Measure
• 1 set Burning Goggles
• 1 each Chipping Hammer
• 1 set Brushes
• 1 pair Leathers (optional)
• 1 each Welding Hood and Lens (Must be attached to hard hat or will attach to hard hat)
• *No Soft Cap Hoods
• Must be at least 18 years of age
• Must be able to lift 50 pounds, climb, bend, twist, stand and reach repetitively.
• Work in hot/cold/damp/cramped environments
• 40 or more hours per week with possible weekend work
• Background check and drug screen based on job location/requirements

Equal Opportunity Employer

Thompson Construction Group, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, disability, veteran status or genetics. In addition to federal law requirements, Thompson Construction Group, Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

• We strive to provide a competitive compensation and benefits package. This includes but is not limited to medical, dental, vision, life insurance, 401(k), wellness programs and career development.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.