Photolithography/Thin Film Coating Manufacturing Engineer/ Entry-Level

Lockheed Martin Corporation; Orlando (FL); On-site; USD 71,000 - 131,000; Full time

Benefits offered by this job

Medical

Dental

Vision

Flexible work arrangements (e.g., 4x10

401(k) match

Paid time off

Holidays

Parental Leave

EAP

Flexible Spending Accounts

Education Assistance

Life Insurance

Short-Term Disability

Long-Term Disability

Job summary

Lockheed Martin Missiles and Fire Control, Optical Components Center in Orlando, FL, seeks a Manufacturing Engineer for photolithography and thin film coatings in optics production. You will design and develop optical coatings for lenses and windows, define equipment parameters, analyze coating data, and provide operator guidance to ensure manufacturing excellence.

A Bachelor’s or Master’s in engineering/physics and U.S. citizenship with the ability to obtain a security clearance are required.

Qualifications

• Bachelor’s or Master’s degree in a technical field from an accredited college.
• Skills or coursework in thin film, coatings, photolithography, optics.
• Programming languages for data analysis: Python, Matlab, Excel VBA.
• U.S. citizenship and ability to obtain a security clearance.

Responsibilities

• Support manufacturing processes of optics, with an emphasis on photolithography and/or thin film coatings.
• Design and develop optical coatings to be deposited on lenses and windows.
• Define the parameters of equipment and maintenance items for production.
• Characterize deposited coatings and analyze data to improve quality.
• Provide technical guidance to operators and develop work instructions.
• Drive adoption of new technologies to improve efficiency and quality.

Skills

Thin film

Coatings

Photolithography

Optics

Education

Bachelor’s or Master’s degree in Materials Science, Chemical Engineering, Electrical Engineering, Mechanical Engineering, Physics

Tools

Python

Matlab

Excel VBA

Job description

Standard Job Description

Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and integrates reporting and data analytics solutions for continuous improvement. Provides input to product design regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.

Standard Job Description

Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and integrates reporting and data analytics solutions for continuous improvement. Provides input to product design regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.

You will be the Photolithography/Thin Film Coating Manufacturing Engineer for Lockheed Martin Missiles and Fire Control, working in the Optical Components Center (OCC) in Orlando, FL. Our team is responsible for designing, developing, and supporting the production life cycle of electromagnetic grids and thin film coatings for various optical systems, and we're looking for a talented Manufacturing Engineer to join our team.

This position is for first shift, Tuesday to Friday (4/10B)

What You Will Be Doing

As the Photolithography/Thin Film Coating Manufacturing Engineer, you will be responsible for supporting manufacturing processes of optics, with an emphasis on photolithography and/or thin film coatings. You will design and develop optical coatings to be deposited on lenses and windows, and define the parameters of equipment for the processes. You will also perform characterization of the deposited coatings and analyze data, and provide technical guidance to operators.

• Supporting manufacturing processes of optics, with an emphasis on photolithography and/or thin film coatings
• Designing and developing optical coatings to be deposited on lenses and windows
• Defining the parameters of equipment for the processes and defining maintenance items for supporting the equipment
• Performing characterization of the deposited coatings and analyzing data
• Providing technical guidance to operators and developing and managing work instructions
• Investigating defective hardware and implementing corrective actions to prevent defects from occurring
• Driving the adoption of new technologies to improve efficiency and quality
• Support manufacturing processes of optics, with an emphasis on photolithography and/or thin film coatings.
• Design and develop the optical coatings to be deposited on lenses and windows.
• Define the parameters of equipment for the processes and define the maintenance items for supporting the equipment for product sustainment.
• Perform characterization of the deposited coatings and analyze data.
• Provide technical guidance to operators and effectively communicate the processes in work instructions. Develop and manage work instructions.
• Investigate defective hardware and provide next steps to get the hardware back into production and implement corrective actions that will prevent defect from occurring.
• Drive the adoption of new technologies (capital investments, automation, robotics) to improve efficiency and quality.

Basic Qualifications

Bachelor’s or Master’s degree in Materials Science, Chemical Engineering, Electrical Engineering, Mechanical Engineering, Physics, or related discipline from an accredited college.

Must have skills, experience and/or course work in one OR more of the following categories:

• Thin film
• Coatings
• Photolithography
• Optics

Experience or basic training in at least one

Programming Language For Data Analysis

• Python
• Matlab
• Excel VBA

Microsoft Office software experience

Must be a U.S. citizen and have the ability to obtain a security clearance.

Desired Skills

Breadth in skills, experience and/or course work across multiple disciplines of manufacturing engineering is strongly desired. Examples include but not limited to: writing/reviewing work instructions (or standard operating procedure manuals), data analytics, automation, mechanical design of equipment or supporting tools, maintaining the product lifecycle, and working in a clean room environment.

Candidates with thin film coating specialization will have skills and/or experience in the design, manufacturing (physical vapor deposition, ion beam sputtering, chemical vapor deposition), and metrology of optical thin film coatings.

Candidates with photolithography specialization will have skills and/or experience with semiconductor fabrication processes (wafer preparation, coating, exposure, development, and etching) and with photolithography equipment (steppers, scanners, and track system).

Knowledge of process control techniques, including statistical process control (SPC), control charts, and yield enhancement.

Having strong time management skills (ability to adjust priorities), ability to work independently, and able to communicate effectively with cross-functional teams are critical skills to support on the floor production.

Pay Information

Full-Time Salary Range: $70500.00 - $130900.00

At Lockheed Martin, we know mission success starts with taking care of our people. Our Total Rewards program is designed to attract top talent, support your well-being, and help you grow - both professionally and personally.

The salary range for this position is as listed on the requisition. Please note that the salary information listed is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market(work location) and business considerations when extending an offer.

Benefits offered:

Medical, Dental, Vision, Flexible work arrangements and schedules (e.g., 4x10), 401(k) match, Paid time off, Holidays, Parental Leave, EAP, Flexible Spending Accounts, Education Assistance, Life Insurance, Short-Term Disability, and Long-Term Disability.

• Annual short-term and/or long-term incentive compensation programs may be offered depending on the position. Payments under these annual programs are not guaranteed and can vary from year to year and are tied to a range of performance metrics.
• For (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, vacation, sick leave and holiday hours are prorated based on start date during the calendar year.