P&C Technician II - P&C Technician Senior

AEP Service Corporation; United States; On-site; USD 43,000 - 86,000; Full time

Job summary

AEP Service Corporation is hiring for a Protection & Control Technician role in the United States. The job covers installation, testing, maintenance of protection and control devices including relays, SDRs/DFRs, SCADA systems, PLCs, and related communications equipment. Travel and variable shifts may be required.

A strong safety discipline and familiarity with electrical diagrams are valued. You’ll collaborate with qualified personnel, perform switching, and help diagnose issues to ensure

Qualifications

• Associate's degree in electrical engineering technology, electronic technology or related technology field.

Responsibilities

• Assist in acceptance and installation tests on protection, control, and measurement devices and associated equipment in stations.
• Assist in installation, maintenance, and operation of power line carriers, station SCADA, and associated communications equipment.
• Perform switching under direct supervision of qualified personnel.
• Maintain test equipment and automotive equipment in good working order for safe, efficient work.
• Prepare and maintain accurate records, reports and drawings.

Education

Associate's degree in electrical engineering technology, electronic technology or related technology field

Job description

Job Posting End Date 11-08-2026 Please note the job posting will close on the day before the posting end date

Job Summary Perform work associated with the installation, operation, testing and maintenance of all protection and control devices and related equipment under general supervision. Such devices and equipment includes but is not limited to digital relays, electromechanical relays, intelligent electronic devices, Station Disturbance Recorders (SDR), digital fault recorders (DFR), oscillographs and event recorders, RTU's and station SCADA systems, statistical load metering, telemetering and transducers. Additionally, install, maintain and operate all power line carriers (PLC), tone, pilot wire, fiber and associated P&C communications equipment. Respond to emergency call-outs and coordinate prompt restoration of service to customers as required. This list is not intended to limit assignment of work or the degree of supervision under all operating conditions. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below., The following reference is provided as a guideline for persons responsible for directing the duties and responsibilities of assigned personnel, to assist in the safety and development of employees, and is not intended to limit assignment of work or the degree of supervision under all operating conditions:

• DIRECT SUPERVISION - When a qualified person is working with/hands-on with the person performing the designated task.
• IMMEDIATE SUPERVISION - When a qualified person is near the structure/equipment and is in constant visual and/or verbal contact to the person performing the designated task.
• GENERAL SUPERVISION - An employee of equal or higher classification, knowledgeable of the task at hand and not necessarily at the job site.
• QUALIFIED PERSON ? P&C Technician Sr or Supervisor who is knowledgeable of the task or work to be performed, and is capable of performing the appropriate emergency rescue.

Job Description

What You’ll Do:

• Assist in the performance of acceptance and installation tests on protection, control, and measurement devices and associated equipment in stations.
• Assist in the installation, maintenance, and operation of all power line carriers, station SCADA, and associated communications equipment or cables as assigned.
• Perform switching under direct supervision of qualified personnel following direction of the proper operating authority.
• Assist in the installation, maintenance, and operation of any new and added equipment or systems as assigned.
• Maintain test equipment and automotive equipment in good working order so that work can be performed safely and efficiently anywhere throughout the System.
• Prepare and maintain accurate records, reports and drawings as required.

Assist employees of equal or higher classification. Perform all duties in accordance with the Company's safety rules and operating regulations, NERC and environmental compliance, and practices. Perform similar or less skilled work as assigned. Test protection &control devices and equipment periodically and as required. Calibrate protection & control devices and equipment on a pre-established schedule and as required. Assist with diagnosis of trouble, mis-operation, or damage of equipment and assist with corrective action to affect repair and prevent recurrence. Operate a computer device to test, calibrate, and retrieve data from protection & control and devices Note: This position is posted at multiple grade levels and offers a range of opportunities for advancement. The minimum qualifications outlined below apply to the P&C Technician II level, with increased educational, skill or experience requirements for higher level P&C Technician Senior.

What We’re Looking For

Education requirements are listed below: P&C Technician II Education requirements are listed below: Associate's degree in electrical engineering technology, electronic technology or related technology field. P&C Technician I Education requirements are listed below: Associate's degree in electrical engineering technology, electronic technology or related technology field P&C Technician Senior Education: Associate's degree in electrical engineering technology, electronic technology or related technology field Work Experience requirement listed below: P&C Technician II Work Experience requirement listed below: No previous work experience required. P&C Technician I Work Experience requirement listed below: Minimum of 24 months satisfactory work experience as a P&C Technician II or the equivalent (as determined by the Company through demonstration, examination and performance appraisal). P&C Technician Senior Experience: Minimum of 24 months satisfactory combined work experience as a P&C Technician I or P&C Technician I Certified or the equivalent (as determined by the Company through demonstration, examination and performance appraisal).

• Other: These are additional expectations for the job and could include specific work experience, license / certifications, preemployment testing, expectations about travel, shift work, etc. Must have satisfactorily performed the duties of, and have all the qualifications of a P&C Technician I and/or P&C Technician I Certified.
• Shall have performed the duties of and have all the qualifications of either a P&C Technician I or P&C Technician I Certified and a combined 24 months of on the job experience or the equivalent.
• Equivalent experience is determined at the time of the assessment with appropriate time step credit given.
• Shall qualify through demonstration, examination and/or performance appraisal as determined by the Company.
• Working knowledge of current, potential, closing and trip circuits.
• Working knowledge of material such as cable, lugs, and wire as applied to protective relay and control circuits.
• Working knowledge of assembly, anchoring, and interchangeability of the various switchboard panel-support and through systems.
• Must have the ability to read, understand, and correct electrical prints and diagrams and the ability to use hand tools.
• Must demonstrate the ability to perform duties in an alert, safe, and business-like manner and the ability to deal with customers and other employees in a courteous and professional manner.
• Ability to interpret, analyze and transmit facts graphically, orally, and in writing clearly and precisely.
• Must possess and maintain a valid state driver’s license and must meet all vehicle operation requirements as designated by federal and/or state law.
• Considerable travel and overtime may be required to complete work assignments.
• Successful completion of Physical Abilities Test (PAT) Demonstrates the ability to understand and perform technical functions required in relevant area of assignment. Demonstrates a good ability to use technical and computer tools to perform assignments in most cost effective method possible.
• Demonstrates good knowledge and ensures compliance with standards, codes, regulations, practices, and procedures in area of assignment. Develops training material for lower classified employees and/or other sections. Prepares cost estimates for non-routine work, i.e., special projects as assigned. Uses records to better plan future work.
• Plans, organizes and conducts meetings. Demonstrates ability to work beyond routine assignments by problem solving of moderate complexity.
• Seeks out new opportunities and areas of learning which increases value to AEP. Functions as a team leader.
• Resolves conflict, builds consensus. Develops and presents technical reports clearly, concisely, and effectively. Makes decisions that affect the work of the team; also maintains an awareness of risk Exhibits awareness of AEP’s competitive position and how business decisions impact their organizational unit.
• Understands organizational goals and offers suggestions on how best to achieve these goals.

Physical Demands

List any physical demands required for this job Minimum Requirement P&C Technician /Electrician

• Amount of Weight Lifted from Floor/Ground to Waist Level 60
• Amount of Weight to be Carried for 20 Feet 50
• Amount of Weight Lifted to Chest Level 30
• Amount of Weight Lifted to Eye Level 30
• Distance to Walk Accumulated over the Course of an 8-Hour Shift 1 Mile
• Distance in Feet to Climb and Work on a Ladder/Structure 20 and Higher
• Distance in Feet to Ascend to and Work in a Bucket/Lift 100 and Higher (Tested at 60’)
• Ability to Discriminate between Colors Yes (Tested)

What You’ll Get

In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees. Where Putting the Customer First Powers Everything We Do! At AEP, we’re more than just an energy company — we’re a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you're passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you!

Compensation Data

Compensation Grade: N010-PC1 Compensation Range: $31.33 - $62.38 The Physical Demand Level for this job is: H – Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or greater than negligible up to 10-20 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Medium Work.

It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics. At American Electric Power, we provide more than electricity to our millions of customers - we energize possibilities. We're redefining the future of energy by reducing our carbon footprint, empowering the communities we serve and building an engaged, talented workforce. All while delivering the reliable service our customers expect. It’s an exciting time in the energy industry. Are you ready to be part of it? We’re looking for team members to help create the grid of the future. Learn more about our commitment to creating a supportive, inclusive work culture that values different experiences.