Overhead Crane Operator – Rigging & Load Handling Expert

Austal USA

Mobile (AL)

Hybrid

USD 52,000 - 68,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Austal USA in Mobile, AL seeks an experienced overhead crane operator for a dynamic shipyard environment. You will operate cranes and auxiliary equipment, rig loads with proper gear, and perform daily inspections to ensure safety and efficiency.

The role requires following precise instructions, maintaining quality standards, and mentoring less experienced coworkers while supporting continuous safety improvements. Must be able to work any shift and meet physical requirements.

Qualifications

  • Minimum 3 years as overhead crane operator in shipyard or similar industry.
  • Experience with vertical lift and telescopic boom forklifts.
  • Must meet ASME B30.2 physical requirements.
  • Able to follow specific instructions with limited supervision.
  • Thorough knowledge of rigging equipment: slings, shackles, clamps, chain hoists, etc.
  • Ability to read load charts and use standard hand signals.
  • Must use PPE per OSHA standards.
  • Good communication and problem-solving on day-to-day tasks.

Responsibilities

  • Perform daily pre-operational inspections of cranes, SPMTs, and forklifts.
  • Select and attach the proper lifting gear to safely lift loads.
  • Complete daily work assignments with signatures and quality control.
  • Maintain cleanliness and organization on assigned job sites.
  • Mentor less experienced craftsmen during shifts.
  • Adhere to regulatory safety guidelines and on-site priorities.
  • Respond to verbal commands and alarms during operations.
  • Willing to work any shift.

Skills

Overhead crane operation
SPMT operation
Vertical lift forklift
Rigging knowledge
Load charts interpretation
ASME B30.2 knowledge
Safety procedures

Tools

SPMT equipment
Lifting gear selection

Job description

  • Must be technically proficient in tasks, work processes, and safe equipment operation
  • Accountable for completion of daily work assignments including the completion and signatures for work completion and quality
  • Actively participate in the continuous development of a work environment that is within parameters of industry accepted safety mandated priorities.
  • Must be willing to work any shift
  • Must maintain cleanliness and organization on assigned job sites
  • Must be able select and attach to load proper lifting gear required to safely and efficiently perform duties of crane operation
  • Participate in continuous practical training of less experienced fellow craftsmen
  • May be assigned tasks that are outside the normal craft requirements
  • Must demonstrate the ability to apply practices that satisfy regulatory requirements and/or industry wide established guidelines to carry out instructions or directions furnished in written, oral, or diagram form. Also will be expected to be able to identify and then resolve small problems which arise while carrying out day-to-day tasks
  • Will conduct daily pre-operational inspection of all machinery including cranes, SPMTs, and forklifts, identifying maintenance needs.

QUALIFICATIONS / KNOWLEDGE / EXPERIENCE:

  • Experience withSPMT is a plus
  • 3 years minimum work experience as an overhead crane operator in a shipyard environment or similar industry
  • Experience as an operator of vertical lift and telescopic boom F/L’s
  • Must meet all the physical requirements specified by ASME B30.2
  • Ability to follow specific instructions and work with limited supervision
  • Must possess a thorough knowledge of equipment used in crane/rigging operations. To include, but not limited to, slings, shackles, clamps, chain hoists, load cells, etc.
  • Demonstrated ability to interpret and utilize load charts
  • Must have a thorough knowledge of USA Standard hand signals
  • Must be able to utilize required personal protective equipment [PPE] as per OSHA standards
  • Must be able to respond to verbal and audible sounds/commands
  • Must be able to read and comprehend simple instructions, correspondence and memos
  • Must be able to effectively present information in one-on-one or small group situations

PREFERENCES:

  • Experience in operating RT/truck cranes
  • Certification as an RT/truck crane operator
  • Experience as a bull rigger
  • Familiarity with load/tension testing processes
  • Experience in programming, configuration, and operation of SPMTs

TOOLS: Will be expected to acquire basic tools on a list to be provided by the Crane/Rigging Manager

DIRECTION EXERCISED: N/A

DISCRETION EXERCISED: N/A

LIAISES WITH: Production Department Supervisors and Foremen, Health, Safety and Environmental representatives

ADDITIONAL GUIDELINES:

  • Candidates must meet the following employment eligibility guidelines to be considered for employment with Austal USA:
  • 18 years of age or older at time of application
  • Able to provide proof of US Person Status
  • No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date
  • No felony convictions of Drug crimes within three years from disposition date
  • Willing to submit to a drug screen
  • Willing to submit to a background check

PHYSICAL REQUIREMENTS:

The physical demands described here are representative of those that an employee must be able to satisfy in order to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites.

While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit.

Specific physical requirements include the following:

Must have the ability to bend, squat, stoop, crawl, and kneel. Perform prolonged standing. Ability to turn head from side to side and about the vertical axis. Ability to turn body at the waist from side to side and about the vertical axis. Lift/push/pull 50lbs to 75lbs on an occasional basis. Lift/push/pull up to 20lbs on a frequent basis. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps). Ability to work at heights above 12’ while working from ladders, scaffolding and/or man lifts. Able to work at a variety of levels (ex. waist, eye, overhead). Demonstrate the ability to make use of required tools and equipment in a safely appropriate manner. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles. Possess sufficient handgrip and coordination to carry and operate tools and equipment. Ability to utilize personal protective equipment (hardhat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards. Ability to withstand cold and hot temperatures. Ability to enter 18” x 36” openings and work in confined spaces for prolonged intervals of time. Able to respond to verbal and audible sounds/commands. Able to utilize adequate visual skills. Ability to achieve full arm extension while reaching overhead, reaching out, reaching to the side, and reaching down. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee should expect to encounter exposure to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee should expect to encounter, on occasion, exposure to fumes and/or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud, + 90 dB.

SAFETY

Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.

Equal Employment Commitment

Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: 251-445-1932.

Austal’s commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

ACCURACY CONTROL INSPECTOR II
ACCURACY CONTROL INSPECTOR II

Austal USA • Mobile (AL)

On-site
USD 55,000 - 75,000
Test and Activation Specialist I
Test and Activation Specialist I

Austal USA LLC • Mobile (AL)

On-site
USD 52,000 - 64,000
Safety Supervisor
Safety Supervisor

Austal USA • Mobile (AL)

On-site
USD 65,000 - 95,000
Electrical Manager
Electrical Manager

Austal USA • Mobile (AL)

On-site
USD 90,000 - 120,000
Electrical Manager
Electrical Manager

Austal USA • Alabama

On-site
USD 85,000 - 110,000
Structural Welder, Class B
Structural Welder, Class B

PCI Manufacturing LLC • Mobile (AL)

On-site
USD 42,000 - 66,000
Senior Electrical Production Manager (Shipbuilding)
Senior Electrical Production Manager (Shipbuilding)

Austal USA • Alabama

On-site
Confidential
Mechanical Engineer IV
Mechanical Engineer IV

Austal USA • Mobile (AL)

On-site
USD 100,000 - 150,000
A Class Structural Fitter
A Class Structural Fitter

Austal USA • Mobile (AL)

On-site
USD 65,000 - 90,000
Staff Accountant
Staff Accountant

Austal • Mobile (AL)

On-site
USD 45,000 - 65,000