Optical Engineer

Qcells

Cartersville (GA)

Presencial

USD 100.000 - 150.000

Jornada completa

Hace 13 días

Una candidatura completa en un minuto

Currículum y carta de presentación personalizados, listos para enviar.

Supera los filtros ATS

Descripción de la vacante

Hanwha Qcells seeks an Optical Engineer to lead optics for vision inspection across our solar manufacturing lines at Cartersville and Dalton. You will specify illumination, lenses, and cameras, install and commission on-line systems, and develop the surrounding software for camera control and image acquisition.

You will quantify inspection performance, maintain detection thresholds, and collaborate with AI, process, and equipment engineers to drive line-wide quality improvements.

Formación

  • Bachelor’s degree in Optical Engineering, Optical Sciences, Photonics, Imaging Science, Applied Physics, or Electrical Engineering with an optics or imaging emphasis.
  • 3+ years of relevant experience.
  • Professional experience in machine vision optical design for defect inspection.
  • Hands-on experience installing, aligning, and commissioning inspection systems on a production line.
  • Experience specifying requirements with industrial camera and illumination suppliers.
  • Demonstrated ability to quantify inspection performance (over-kill and miss rates, threshold setting).
  • Proficiency in C#, C++, or Python to build vision applications.
  • Ability to collaborate with colleagues, customers, suppliers, and stakeholders from different technical backgrounds.

Responsabilidades

  • Design inspection optics for each defect type, covering illumination (wavelength, angle, uniformity), lens, field of view, resolution, and camera or sensor selection, and finalize installation specifications with mechanical and controls engineering.
  • Install and commission inspection systems on the production line, including mounting, alignment, focus and lighting setup, and acceptance criteria for image quality
  • Lead proof-of-concept evaluation of new inspection capability, including vendor technical assessment, bench trial design, detection-limit measurement, and production readiness decisions
  • Own optical specifications for new inspection lines from the ground up, including vendor selection, incoming acceptance testing, and commissioning
  • Quantify and track inspection performance in production (over-kill rate, miss rate, and detection coverage), and design the evaluation sample set and labels required to measure them, including known-good labels
  • Set and maintain detection thresholds and judgment criteria together with process and quality engineering
  • Monitor and correct image quality on equipment already in production: focus and brightness drift, field-of-view alignment, tool-to-tool variation, and line-to-line standardization
  • Determine root-cause attribution when over-kill or miss rates rise, separating optical, process, and model causes, working with AI, process, and equipment engineering
  • Develop the vision application that runs around the optics, covering camera control, triggering, image acquisition and preprocessing, and the interface to the AI inference server at line speed
  • Build and maintain the on-floor viewer used by operators and engineers, covering live inspection images and results, defect review and re-judgment, lookup of past inspections by product or tool, and threshold configuration
  • Support inspection across EL, front-end and back-end AOI, string and solder joint inspection, final visual inspection, wafer surface and saw-mark inspection, and real-time image metrology on crystal growth, spanning visible, near-infrared, and laser-based measurement

Descripción del empleo

Description
Optical Engineer
Title: Optical Engineer
Location: Cartersville, GA (Qcells Cartersville Factory)
Department: Smart Intelligence Team

The Optical Engineer will design, install, and own the optics of every vision inspection across Qcells’ solar manufacturing line, spanning ingot, wafer, cell, and module processes at the Cartersville (CTV) and Dalton (DLT) plants. The first assignment is optical design and installation: specifying illumination, lens, and camera for each defect type, building the setup on the line, and proving that it reveals what it is meant to reveal. Detection performance is set by the optics before any algorithm sees the image. The role also builds the software that runs around the optics, including camera control and image acquisition, the interface to the AI inference server, and the on-floor viewer used by operators and engineers. Deep learning detection models are developed by dedicated AI engineers on the same team, so this role owns the optics, the application around them, and the measurement of inspection performance rather than model development.

Responsibilities
  • Design inspection optics for each defect type, covering illumination (wavelength, angle, uniformity), lens, field of view, resolution, and camera or sensor selection, and finalize installation specifications with mechanical and controls engineering
  • Install and commission inspection systems on the production line, including mounting, alignment, focus and lighting setup, and acceptance criteria for image quality
  • Lead proof-of-concept evaluation of new inspection capability, including vendor technical assessment, bench trial design, detection-limit measurement, and production readiness decisions
  • Own optical specifications for new inspection lines from the ground up, including vendor selection, incoming acceptance testing, and commissioning
  • Quantify and track inspection performance in production (over-kill rate, miss rate, and detection coverage), and design the evaluation sample set and labels required to measure them, including known-good labels
  • Set and maintain detection thresholds and judgment criteria together with process and quality engineering
  • Monitor and correct image quality on equipment already in production: focus and brightness drift, field-of-view alignment, tool-to-tool variation, and line-to-line standardization
  • Determine root-cause attribution when over-kill or miss rates rise, separating optical, process, and model causes, working with AI, process, and equipment engineering
  • Develop the vision application that runs around the optics, covering camera control, triggering, image acquisition and preprocessing, and the interface to the AI inference server at line speed
  • Build and maintain the on-floor viewer used by operators and engineers, covering live inspection images and results, defect review and re-judgment, lookup of past inspections by product or tool, and threshold configuration
  • Support inspection across EL, front-end and back-end AOI, string and solder joint inspection, final visual inspection, wafer surface and saw-mark inspection, and real-time image metrology on crystal growth, spanning visible, near-infrared, and laser-based measurement
Required Qualifications
  • Bachelor’s degree in Optical Engineering, Optical Sciences, Photonics, Imaging Science, Applied Physics, or Electrical Engineering with an optics or imaging emphasis
  • 3+ years of relevant experience
  • Professional experience in machine vision optical design, covering selection and validation of illumination, lenses, and cameras for defect inspection
  • Hands-on experience installing, aligning, and commissioning inspection systems on a production line, and sustaining them afterward
  • Experience specifying requirements and working directly with industrial camera and illumination suppliers
  • Demonstrated experience quantifying inspection performance, including over-kill and miss rates, threshold setting, and before-and-after verification of changes
  • Working proficiency in C#, C++, or Python, sufficient to build and modify vision applications and operator screens
  • Ability to collaborate effectively with colleagues, customers, suppliers, and stakeholders from different technical backgrounds
Preferred Qualifications
  • High-volume inspection experience in semiconductor, display, or solar manufacturing
  • Electroluminescence (EL) inspection experience
  • 3D metrology experience such as laser triangulation, structured light, or confocal measurement
  • Measurement systems analysis (Gage R&R) or inspection capability studies
  • Experience with optical design and simulation tools such as Zemax
  • Hands-on use of machine vision SDKs (Halcon, Cognex VisionPro, OpenCV) and camera interface standards (GigE Vision, USB3 Vision, GenICam)
  • Experience integrating vision systems with external systems over network protocols (TCP/IP, HTTP/REST, or gRPC)
  • Experience developing operator-facing GUI applications (WinForms/WPF or Qt)
  • Experience interfacing vision systems with manufacturing equipment, PLC, or MES

Hanwha Qcells provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics.

Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

Optical Engineer
Optical Engineer

Qcells • Cartersville (GA)

Presencial
USD 90.000 - 130.000
Optical Engineer
Optical Engineer

Qcells Georgia, Inc. • Cartersville (GA)

Presencial
USD 90.000 - 130.000
Optical Engineer
Optical Engineer

Qcells North America • Cartersville (GA)

Presencial
USD 90.000 - 130.000
Optical Vision Engineer - Production-Line Inspection
Optical Vision Engineer - Production-Line Inspection

Qcells North America • Cartersville (GA)

Presencial
USD 90.000 - 130.000
Optical Vision Engineer - Production-Line Inspection
Optical Vision Engineer - Production-Line Inspection

Qcells USA Corp. • Cartersville (GA)

Presencial
USD 90.000 - 130.000
Vision Optics Engineer - On-Line Inspection Lead
Vision Optics Engineer - On-Line Inspection Lead

Qcells • Cartersville (GA)

Presencial
USD 100.000 - 150.000
Optical Vision Engineer - Solar Manufacturing Line
Optical Vision Engineer - Solar Manufacturing Line

Qcells Georgia, Inc. • Cartersville (GA)

Presencial
USD 90.000 - 130.000
Optical Engineer
Optical Engineer

Edge Staffing • Boston (MA)

Híbrido
USD 120.000 - 160.000
Optical Engineer II
Optical Engineer II

Technology Transfer Services • New York (NY)

Presencial
USD 90.000 - 120.000
Senior Vision Automation Engineer -1531
Senior Vision Automation Engineer -1531

Control System Integrators • Lansing (MI)

Presencial
USD 95.000 - 150.000