Optical Engineer

Qcells North America

Cartersville (GA)

On-site

USD 90,000 - 130,000

Full time

11 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Qcells North America is seeking an Optical Engineer to design, install, and own the optics of vision inspection across the Cartersville and Dalton solar manufacturing lines. You will specify illumination, lenses, and cameras for each defect type and prove the setup reveals the intended information.

You will also build the surrounding software—camera control, image acquisition, AI-interface, and the on-floor viewer—while collaborating with AI engineers on model development.

Qualifications

  • Bachelor's degree in Optical Engineering, Optical Sciences, Photonics, Imaging Science, Applied Physics, or Electrical Engineering with optics/imaging emphasis.
  • 3+ years of relevant experience in machine vision optical design.
  • Experience selecting illumination, lenses, and cameras for defect inspection on production lines.
  • Hands-on experience installing, aligning, and commissioning inspection systems.

Responsibilities

  • Design inspection optics for defect types: illumination, lenses, FOV, resolution, and camera selection.
  • Install and commission inspection systems on the production line with alignment and lighting setup.
  • Lead proof-of-concept evaluations for new inspection capabilities.
  • Own optical specs for new lines: vendor selection, testing, commissioning.
  • Quantify inspection performance and maintain detection thresholds with QA.
  • Develop the vision application: camera control, triggering, preprocessing, AI interface.
  • Build and maintain the on-floor viewer for operators and engineers.
  • Collaborate with AI, process, and equipment engineering to diagnose issues.
  • Interface vision systems with manufacturing equipment over networks.
  • Support inspection across EL, AOI, and other line inspections.

Skills

C#
C++
Python

Education

Bachelor's degree in Optical Engineering or related field

Tools

Zemax
Halcon
Cognex VisionPro
OpenCV

Job description

Department: Smart Intelligence Team

The Optical Engineer will design, install, and own the optics of every vision inspection across Qcells’ solar manufacturing line, spanning ingot, wafer, cell, and module processes at the Cartersville (CTV) and Dalton (DLT) plants. The first assignment is optical design and installation: specifying illumination, lens, and camera for each defect type, building the setup on the line, and proving that it reveals what it is meant to reveal. Detection performance is set by the optics before any algorithm sees the image. The role also builds the software that runs around the optics, including camera control and image acquisition, the interface to the AI inference server, and the on-floor viewer used by operators and engineers. Deep learning detection models are developed by dedicated AI engineers on the same team, so this role owns the optics, the application around them, and the measurement of inspection performance rather than model development.

Description
Optical Engineer
Title: Optical Engineer
Location: Cartersville, GA (Qcells Cartersville Factory)
Department: Smart Intelligence Team

The Optical Engineer will design, install, and own the optics of every vision inspection across Qcells’ solar manufacturing line, spanning ingot, wafer, cell, and module processes at the Cartersville (CTV) and Dalton (DLT) plants. The first assignment is optical design and installation: specifying illumination, lens, and camera for each defect type, building the setup on the line, and proving that it reveals what it is meant to reveal. Detection performance is set by the optics before any algorithm sees the image. The role also builds the software that runs around the optics, including camera control and image acquisition, the interface to the AI inference server, and the on-floor viewer used by operators and engineers. Deep learning detection models are developed by dedicated AI engineers on the same team, so this role owns the optics, the application around them, and the measurement of inspection performance rather than model development.

Responsibilities
  • Design inspection optics for each defect type, covering illumination (wavelength, angle, uniformity), lens, field of view, resolution, and camera or sensor selection, and finalize installation specifications with mechanical and controls engineering
  • Install and commission inspection systems on the production line, including mounting, alignment, focus and lighting setup, and acceptance criteria for image quality
  • Lead proof-of-concept evaluation of new inspection capability, including vendor technical assessment, bench trial design, detection-limit measurement, and production readiness decisions
  • Own optical specifications for new inspection lines from the ground up, including vendor selection, incoming acceptance testing, and commissioning
  • Quantify and track inspection performance in production (over-kill rate, miss rate, and detection coverage), and design the evaluation sample set and labels required to measure them, including known-good labels
  • Set and maintain detection thresholds and judgment criteria together with process and quality engineering
  • Monitor and correct image quality on equipment already in production: focus and brightness drift, field-of-view alignment, tool-to-tool variation, and line-to-line standardization
  • Determine root-cause attribution when over-kill or miss rates rise, separating optical, process, and model causes, working with AI, process, and equipment engineering
  • Develop the vision application that runs around the optics, covering camera control, triggering, image acquisition and preprocessing, and the interface to the AI inference server at line speed
  • Build and maintain the on-floor viewer used by operators and engineers, covering live inspection images and results, defect review and re-judgment, lookup of past inspections by product or tool, and threshold configuration
  • Support inspection across EL, front-end and back-end AOI, string and solder joint inspection, final visual inspection, wafer surface and saw-mark inspection, and real-time image metrology on crystal growth, spanning visible, near-infrared, and laser-based measurement
Required Qualifications
  • Bachelor’s degree in Optical Engineering, Optical Sciences, Photonics, Imaging Science, Applied Physics, or Electrical Engineering with an optics or imaging emphasis
  • 3+ years of relevant experience
  • Professional experience in machine vision optical design, covering selection and validation of illumination, lenses, and cameras for defect inspection
  • Hands-on experience installing, aligning, and commissioning inspection systems on a production line, and sustaining them afterward
  • Experience specifying requirements and working directly with industrial camera and illumination suppliers
  • Demonstrated experience quantifying inspection performance, including over-kill and miss rates, threshold setting, and before-and-after verification of changes
  • Working proficiency in C#, C++, or Python, sufficient to build and modify vision applications and operator screens
  • Ability to collaborate effectively with colleagues, customers, suppliers, and stakeholders from different technical backgrounds
Preferred Qualifications
  • High-volume inspection experience in semiconductor, display, or solar manufacturing
  • Electroluminescence (EL) inspection experience
  • 3D metrology experience such as laser triangulation, structured light, or confocal measurement
  • Measurement systems analysis (Gage R&R) or inspection capability studies
  • Experience with optical design and simulation tools such as Zemax
  • Hands-on use of machine vision SDKs (Halcon, Cognex VisionPro, OpenCV) and camera interface standards (GigE Vision, USB3 Vision, GenICam)
  • Experience integrating vision systems with external systems over network protocols (TCP/IP, HTTP/REST, or gRPC)
  • Experience developing operator-facing GUI applications (WinForms/WPF or Qt)
  • Experience interfacing vision systems with manufacturing equipment, PLC, or MES

Hanwha Qcells provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Optical Engineer
Optical Engineer

Qcells Georgia, Inc. • Cartersville (GA)

On-site
USD 90,000 - 130,000
Optical Engineer
Optical Engineer

Qcells • Cartersville (GA)

On-site
USD 100,000 - 150,000
Optical Engineer
Optical Engineer

Qcells • Cartersville (GA)

On-site
USD 90,000 - 130,000
Optical Vision Engineer - Production-Line Inspection
Optical Vision Engineer - Production-Line Inspection

Qcells North America • Cartersville (GA)

On-site
USD 90,000 - 130,000
Optical Vision Engineer - Production-Line Inspection
Optical Vision Engineer - Production-Line Inspection

Qcells USA Corp. • Cartersville (GA)

On-site
USD 90,000 - 130,000
Vision Optics Engineer - On-Line Inspection Lead
Vision Optics Engineer - On-Line Inspection Lead

Qcells • Cartersville (GA)

On-site
USD 100,000 - 150,000
Optical Vision Engineer - Solar Manufacturing Line
Optical Vision Engineer - Solar Manufacturing Line

Qcells Georgia, Inc. • Cartersville (GA)

On-site
USD 90,000 - 130,000
Optical Engineer
Optical Engineer

Edge Staffing • Boston (MA)

Hybrid
USD 120,000 - 160,000
Vision Engineer
Vision Engineer

Corning, Inc. • Hickory (NC)

On-site
USD 106,000 - 145,000
Bonuses and long‑term incentives
401(k) with company match
Health, dental, vision benefits
Optical Engineer - 971
Optical Engineer - 971

Quantinuum • Broomfield (CO)

On-site
USD 102,000 - 128,000
Competitive compensation
Flexible work arrangements
Employer-subsidized medical, dental, &
+5