Onsite Test Engineer – Automation & DFx Lead

Mack Technologies

Florida

Vor Ort

CAD 70.000 - 100.000

Vollzeit

14 Tage+

Erhalte eine Antwort von diesem Arbeitgeber

Dein Lebenslauf und dein Anschreiben, genau auf das zugeschnitten, was gesucht wird.

Schaffe es an den ATS-Filtern vorbei

Zusammenfassung

The Test Engineer at Mack Technologies Florida, Inc. supports production for test equipment, performing hardware setup and software development tailored to customer needs. The role is 100% onsite and reports to the Test Engineering Manager.

Responsibilities include PCB layout with Altium Designer, DFx participation, test automation, data analysis and customer reporting, plus training for operators and technicians.

Qualifikationen

  • Bachelor degree or 7 years experience as alternative.
  • Experience with networking hardware and software.
  • Experience designing test fixtures.
  • Experience with automated test equipment, calibration and configuration management.
  • Genrad ICT development and debugging a plus.
  • Languages: Visual Basic, .NET, C++, C, LabVIEW and Shell Scripting.
  • Applications: MS Office, AutoCAD, Altium Designer, Visual Basic and Master Control.
  • Knowledge and use of an ERP system.
  • Flying probe development and debugging a plus.
  • Ability to interpret drawings and diagrams.
  • Experience with Six Sigma or Lean methods.

Aufgaben

  • Design circuit board layout for new and existing test stations using Altium Designer.
  • Support production with failure analysis, test debugging, reduction of false failures and downtime.
  • Lead test improvement, automation, and test coverage enhancements.
  • Review capital investments to improve capabilities and capacity.
  • Prepare technical reports and test data analyses for customers and management.
  • Provide training in new procedures to production test operators and technicians.

Kenntnisse

Programming languages: Visual Basic, .

Ausbildung

Bachelor of Science in Computer Science, Electronics or Electrical Engineering or equivalent

Tools

Altium Designer
MS Office
AutoCAD
Master Control

Jobbeschreibung

Summary

The Test Engineer is responsible for supporting production for test equipment including hardware setup and software development, specific to customer requirements for Mack Technologies Florida, Inc. Reports to the Test Engineering Manager. (100% onsite)

  • Design circuit board layout for new and existing test stations using Altium Designer.
  • Contribute to design for manufacturability (DFM), design for assembly (DFA), design for test (DFT) for customer products.
  • Support production with failure analysis, test debugging, reduction of false failures and downtime of test equipment.
  • Lead and drive test improvement including but not limited to: reduction in time, improvements in test coverage and improving automation of test equipment.
  • Participate in the review of capital investments including various pieces of test equipment to improve capabilities and capacity.
  • Participate in quality reviews to aid in reduction of quality escapes through improved test coverage, capability and improved automation.
  • Develop documentation of procedures to be used from the initial test design phase to production.
  • Generate monthly and quarterly reports and analysis of test data and prepare documentation and recommendations for customers.
  • Review test equipment designs, test capacity, data and RMA issues with customers on a regular basis.
  • Direct and coordinate engineering activities concerned with development, procurement, installation and calibration of instruments, equipment, control devices required to test, record and reduce test data.
  • Direct and exercise control over operational, functional and performance phases of tests.
  • Analyze and interpret test data and prepare technical reports for use by Test Engineering and Management personnel.
  • Maintain customer supplied test inventory.
  • Perform routine technique development and maintenance, subject to established Mack Technologies standards, including ISO and AS9100 development standards.
  • Provide training in new procedures to production test operators, failure analysis technicians and the Test Engineering Dept.

Summary

The Test Engineer is responsible for supporting production for test equipment including hardware setup and software development, specific to customer requirements for Mack Technologies Florida, Inc. Reports to the Test Engineering Manager. (100% onsite)

Essential Duties And Responsibilities

  • Design circuit board layout for new and existing test stations using Altium Designer.
  • Contribute to design for manufacturability (DFM), design for assembly (DFA), design for test (DFT) for customer products.
  • Support production with failure analysis, test debugging, reduction of false failures and downtime of test equipment.
  • Lead and drive test improvement including but not limited to: reduction in time, improvements in test coverage and improving automation of test equipment.
  • Participate in the review of capital investments including various pieces of test equipment to improve capabilities and capacity.
  • Participate in quality reviews to aid in reduction of quality escapes through improved test coverage, capability and improved automation.
  • Develop documentation of procedures to be used from the initial test design phase to production.
  • Generate monthly and quarterly reports and analysis of test data and prepare documentation and recommendations for customers.
  • Review test equipment designs, test capacity, data and RMA issues with customers on a regular basis.
  • Direct and coordinate engineering activities concerned with development, procurement, installation and calibration of instruments, equipment, control devices required to test, record and reduce test data.
  • Direct and exercise control over operational, functional and performance phases of tests.
  • Analyze and interpret test data and prepare technical reports for use by Test Engineering and Management personnel.
  • Maintain customer supplied test inventory.
  • Perform routine technique development and maintenance, subject to established Mack Technologies standards, including ISO and AS9100 development standards.
  • Provide training in new procedures to production test operators, failure analysis technicians and the Test Engineering Dept.

Qualifications

  • Bachelor of Science degree in Computer Science, Electronic or Electrical Engineering or equivalent; 2 + years of experience as a Test Engineer in a manufacturing environment; or 7 years in lieu of a degree.
  • Experience with networking hardware and software preferred.
  • Experience designing test fixtures.
  • Experience with automated test equipment, calibration, and configuration management.
  • Genrad ICT development and debugging experience a plus.
  • Languages: Visual Basic, .NET, C++, C, Lab-View and Shell Scripting.
  • Applications: MS Office Suite, AutoCAD, Altium Designer, Visual Basic and Master Control.
  • Knowledge and use of an ERP system.
  • Flying probe development and debugging a plus.
  • Ability to interpret detailed drawings, schematics and diagrams.
  • Ability to design creative manufacturing and process solutions that meet both the company and customer goals concurrently.
  • Ability to define problems, collect data, establish facts and draw valid conclusions
  • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
  • Must be able to function effectively in a team environment and interact with multiple departments across the Company.
  • Experience with problem solving and troubleshooting skills using solid Six Sigma or Lean Methods.
  • Experience with test process (including equipment and operator) validation methods.
  • Prior experience applying AS9100 quality standards in a test environment.
  • Knowledge of ISO9001 Quality System/manufacturing requirements.
  • Willingness to work flexible hours as necessary.
  • US Person as defined in 22 CRF Part 120.15 (U.S. citizens, lawful permanent residents, refugees and those given asylum in the United States, and temporary residents granted amnesty) since work includes ITAR controlled technical data.

Submit Application
Hol dir deinen kostenlosen, vertraulichen Lebenslauf-Check.

oder ziehe deine Datei hierhin.

Similar jobs

Ähnliche Jobs, die dir auch gefallen könnten

Test Engineer
Test Engineer

Mack Technologies • Florida

Vor Ort
CAD 70.000 - 100.000
Test Engineer
Test Engineer

Mack Technologies Cd. Juárez • Westford (MA)

Vor Ort
USD 70.000 - 100.000
Senior SMT Manufacturing Engineer - On-Site Impact Leader
Senior SMT Manufacturing Engineer - On-Site Impact Leader

Mack Technologies • Florida

Vor Ort
AUD 90.000 - 130.000
Senior SMT Manufacturing Engineer
Senior SMT Manufacturing Engineer

Mack Technologies Cd. Juárez • Westford (MA)

Vor Ort
USD 90.000 - 125.000
Test Engineer: Hardware & Automation Systems (Onsite)
Test Engineer: Hardware & Automation Systems (Onsite)

Mack Technologies Cd. Juárez • Westford (MA)

Vor Ort
USD 70.000 - 100.000
Test Engineer
Test Engineer

DATA DEVICE CORPORATION • Bohemia (NY)

Vor Ort
USD 80.000 - 105.000
Senior SMT Manufacturing Engineer
Senior SMT Manufacturing Engineer

Mack Technologies • Florida

Vor Ort
AUD 90.000 - 130.000
Test & Automation Engineering Supervisor
Test & Automation Engineering Supervisor

Eaton Corporation • Kentwood (MI)

Vor Ort
USD 90.000 - 130.000
Test Engineer
Test Engineer

SSI Technologies, Inc. • Janesville (WI)

Vor Ort
USD 65.000 - 95.000
Manufacturing Test Engineer
Manufacturing Test Engineer

Adecco • San Antonio (TX)

Vor Ort
USD 70.000 - 90.000