NPI Quality and Metrology Engineer

NIC Global; Gallatin (TN); On-site; USD 80,000 - 92,000; Full time

Benefits offered by this job

Health insurance plans

Life insurance, AD&D, and disability

Vision Insurance

401(k) with employer match

Tuition Reimbursement

PTO and holiday pay

Job summary

NIC Global in Tennessee is seeking a Quality and Metrology Engineer to perform dimensional inspection of parts using CMMs, portable scanners, and manual tools. You will support calibration control, MSA studies, and PPAP documentation to ensure compliance with PACCAR and IATF 16949 quality requirements.

The role collaborates with Quality, Manufacturing, and Design teams to resolve dimensional non-conformances.

Qualifications

• 2–4 years of quality assurance/metrology experience in manufacturing.
• Knowledge of GD&T (ASME Y14.5) and tolerance stack-ups.
• Proficiency with manual inspection tools and blueprint reading.
• Experience with MSA studies (Gage R&R) and PPAP documentation.
• Understanding of IATF 16949 / ISO 9001 quality systems.

Responsibilities

• Perform dimensional inspection using CMM equipment, generating detailed measurement reports and analyzing results against drawings and GD&T specifications.
• Operate portable scanning/rover arm equipment to capture 3D part geometry and compare against CAD models for deviation analysis.
• Maintain the calibration control system, including scheduling, tracking due dates, and ensuring all gauges and measurement equipment are within calibration.
• Conduct MSA studies, including Gage R&R, bias, linearity, and stability studies, and interpret results for process capability decisions.
• Prepare and compile PPAP documentation, including dimensional layouts, control plans, and supporting quality records for customer submission.
• Identify and document non-conforming measurement results and elevate as needed.
• Maintain accurate quality records, calibration logs, MSA study results and audit documentation.
• Collaborate with Quality, Manufacturing, and Design teams to resolve dimensional non-conformances.

Skills

Quality assurance

Metrology

GD&T (ASME Y14.5)

Blueprint reading

Calibration principles

MSA studies (Gage R&R)

PPAP knowledge

IATF 16949 / ISO 9001

MS Office

Tools

QMS software

ERP systems

Minitab or similar

Job description

Salary Range: $80,000.00 To $92,000.00 Annually

NIC Global is a single-source manufacturer providing turn-key mechanical and electromechanical assembly, expert sheet metal fabrication, and global sourcing of metal and plastic components. We provide products to great customers such as Philips, PACCAR (Kenworth & Peterbilt), Schweitzer Engineering Laboratories, Physio Controls, and Leviton to name a few. Our growing company employs over 600 people in Washington, Tennessee, Ohio, and Texas.

Come work with us and experience our fun atmosphere that provides a great place to work and grow your career. Employees are celebrated through quarterly employee appreciation events, holiday parties, cook outs, company gifts, and various other employee events and recognition programs. We feel that great companies value their employees, and those employees are vital to the overall success of the entire organization.

In addition to an outstanding company culture, NIC Global offers other great benefits including:

Eligible for insurance 1 st of the month after 30 days, including:

• Choice of two health insurance plans


• Employer paid life insurance, AD&DD, and long-term disability plans


• Vision Insurance


• Additional Life Insurance


• Critical illness insurance


• Federal health and dependent care savings accounts (FSA)


• 401(k) plan, with employer match


• Tuition Reimbursement

Other benefits include PTO accrual of 80 hours in the 1 st year, increasing with length of service milestones and 80 hours of holiday pay per year.

The NPI Quality and Metrology Engineer is responsible for dimensional inspection and measurement of manufactured parts using Coordinate Measuring Machines (CMM), portable scanning arms, and manual inspection tools. This role supports calibration control, Measurement System Analysis (MSA), and PPAP documentation to ensure compliance with customer (PACCAR) and IATF 16949 quality requirements.

Essential Functions

• Perform dimensional inspection of parts using CMM equipment, generating detailed measurement reports and analyzing results against engineering drawings and GD&T specifications.


• Operate portable scanning/rover arm equipment to capture 3D part geometry and compare against CAD models for deviation analysis.


• Maintain the calibration control system, including scheduling, tracking due dates, and ensuring all gauges and measurement equipment are within calibration.


• Perform internal calibration of measurement equipment per established procedures and applicable standards (e.g., ISO 17025 practices where applicable).


• Conduct Measurement System Analysis (MSA) studies, including Gage R&R, bias, linearity, and stability studies, and interpret results for process capability decisions.


• Prepare and compile PPAP (Production Part Approval Process) documentation, including dimensional layouts, control plans, and supporting quality records for customer submission.


• Identify and document non-conforming measurement results and elevate as needed.


• Maintain accurate quality records, calibration logs, MSA study results and audit documentation.


• Support internal and external audits (IATF 16949) by providing calibration and measurement documentation as requested.


• Collaborate with Quality, Manufacturing, and Design teams to resolve dimensional non-conformances.

Required Qualifications

• 2–4 years of experience in a quality assurance/metrology role within a manufacturing environment.


• Knowledge of GD&T (ASME Y14.5), including interpretation of complex tolerance stack-ups, datum reference frames, and true position calculations.


• Proficiency with manual inspection tools and blueprint reading.


• Working knowledge of calibration principles and traceability requirements.


• Experience conducting or supporting MSA studies (Gage R&R).


• Familiarity with PPAP requirements and documentation (AIAG core tools).


• Understanding of IATF 16949 / ISO 9001 quality management systems.


• Proficiency with Microsoft Office (Excel, Word, PowerPoint); experience with quality management software (QMS/ERP systems) and simulation software a plus.

Preferred Qualifications

• Hands-on experience operating CMM equipment.


• Experience with portable scanning/rover arm measurement systems.


• Clear written and verbal communication skills, with the ability to train and coach production associates.


• Ability to read and interpret engineering drawings, blueprints, and technical specifications.


• Experience with statistical software (Minitab or similar) and MSA analysis.


• Familiarity with APQP, and AIAG core tools.

Physical Requirements

• Ability to stand/walk for extended periods on the manufacturing floor.


• Ability to lift up to 25–35 lbs (parts, gauges, fixtures).


• Use of personal protective equipment (PPE) as required by site safety policy.

NIC Global is a single-source manufacturer providing turn-key mechanical and electromechanical assembly, expert sheet metal fabrication, and global sourcing of metal and plastic components. We provide products to great customers such as Philips, PACCAR (Kenworth & Peterbilt), Schweitzer Engineering Laboratories, Physio Controls, and Leviton to name a few. Our growing company employs over 600 people in Washington, Tennessee, Ohio, and Texas.

Come work with us and experience our fun atmosphere that provides a great place to work and grow your career. Employees are celebrated through quarterly employee appreciation events, holiday parties, cook outs, company gifts, and various other employee events and recognition programs. We feel that great companies value their employees, and those employees are vital to the overall success of the entire organization.

In addition to an outstanding company culture, NIC Global offers other great benefits including:

Eligible for insurance 1 st of the month after 30 days, including:

• Choice of two health insurance plans


• Employer paid employee dental Insurance


• Employer paid life insurance, AD&DD, and long-term disability plans


• Vision Insurance


• Additional Life Insurance


• Accident insurance


• Critical illness insurance


• Federal health and dependent care savings accounts (FSA)

Eligible after 6 months:

• 401(k) plan, with employer match


• Tuition Reimbursement

Other benefits include PTO accrual of 80 hours in the 1 st year, increasing with length of service milestones and 80 hours of holiday pay per year.

The NPI Quality and Metrology Engineer is responsible for dimensional inspection and measurement of manufactured parts using Coordinate Measuring Machines (CMM), portable scanning arms, and manual inspection tools. This role supports calibration control, Measurement System Analysis (MSA), and PPAP documentation to ensure compliance with customer (PACCAR) and IATF 16949 quality requirements.

Essential Functions

• Perform dimensional inspection of parts using CMM equipment, generating detailed measurement reports and analyzing results against engineering drawings and GD&T specifications.


• Operate portable scanning/rover arm equipment to capture 3D part geometry and compare against CAD models for deviation analysis.


• Maintain the calibration control system, including scheduling, tracking due dates, and ensuring all gauges and measurement equipment are within calibration.


• Perform internal calibration of measurement equipment per established procedures and applicable standards (e.g., ISO 17025 practices where applicable).


• Conduct Measurement System Analysis (MSA) studies, including Gage R&R, bias, linearity, and stability studies, and interpret results for process capability decisions.


• Prepare and compile PPAP (Production Part Approval Process) documentation, including dimensional layouts, control plans, and supporting quality records for customer submission.


• Identify and document non-conforming measurement results and elevate as needed.


• Maintain accurate quality records, calibration logs, MSA study results and audit documentation.


• Support internal and external audits (IATF 16949) by providing calibration and measurement documentation as requested.


• Collaborate with Quality, Manufacturing, and Design teams to resolve dimensional non-conformances.

Required Qualifications

• 2–4 years of experience in a quality assurance/metrology role within a manufacturing environment.


• Knowledge of GD&T (ASME Y14.5), including interpretation of complex tolerance stack-ups, datum reference frames, and true position calculations.


• Proficiency with manual inspection tools and blueprint reading.


• Working knowledge of calibration principles and traceability requirements.


• Experience conducting or supporting MSA studies (Gage R&R).


• Familiarity with PPAP requirements and documentation (AIAG core tools).


• Understanding of IATF 16949 / ISO 9001 quality management systems.


• Proficiency with Microsoft Office (Excel, Word, PowerPoint); experience with quality management software (QMS/ERP systems) and simulation software a plus.

Preferred Qualifications

• Hands-on experience operating CMM equipment.


• Experience with portable scanning/rover arm measurement systems.


• Clear written and verbal communication skills, with the ability to train and coach production associates.


• Ability to read and interpret engineering drawings, blueprints, and technical specifications.


• Experience with statistical software (Minitab or similar) and MSA analysis.


• Familiarity with APQP, and AIAG core tools.

Physical Requirements

• Ability to stand/walk for extended periods on the manufacturing floor.


• Ability to lift up to 25–35 lbs (parts, gauges, fixtures).


• Use of personal protective equipment (PPE) as required by site safety policy.

7:00 am until 4:30 pm Monday thru Thursday and 7:00 am until 11:00 am on Fridays.

40 hours per week.