Non-Destructive Examination / NDT Technician - Weekend 12hr 1st Shift

gevernova; Wilmington (NC); On-site; USD 70,000 - 100,000; Full time

Job summary

GE Vernova seeks a skilled maintenance technician to assemble, diagnose, repair, calibrate and modify complex automated systems across mechanical, electronic, and micro-electronics domains. You will utilize advanced test equipment, read schematics, and document procedures while maintaining safety and quality standards.

You will train peers, install new equipment, and contribute to auditable documentation. A comprehensive onboarding period and day-shift readiness are part of the role.

Qualifications

• Highschool Diploma or GED with 5 years in maintenance or fabrication of related industrial equipment.
• Associate degree in electronics or instrumentation, or equivalent training with 3 years relevant experience.
• Minimum of two (2) years of experience in troubleshooting, diagnosing, and repairing industrial, electrical, electronic, pneumatic, and electro-mechanical control equipment.
• Minimum of two (2) years reading and interpreting drawings, schematics, ladder logic, instruction manuals and logic symbol schematics.
• Minimum of two (2) years experience with state-of-the-art test equipment such as multimeters, digital oscilloscopes, programmable power supplies, calibrators, digital analyzers, and microprocessor development systems.
• Minimum of two (2) years experience with basic hand tools, soldering equipment, electrical and electronics test equipment.
• Minimum of two (2) years experience with microprocessor software structure and commands.

Responsibilities

• Maintain, repair, calibrate and perform preventative maintenance on manufacturing and quality assurance automated systems.
• Read and interpret schematics, wiring diagrams, parts lists, and ladder logic.
• Troubleshoot computer hardware, software and interface peripherals and document changes.
• Use diagnostic software and test equipment to resolve hardware and software issues.
• Provide training and diagnostic assistance for other personnel in work group as needed.
• Install new or modified equipment and update documentation.

Skills

Troubleshooting

Schematics reading

Test equipment

Documentation

Safety compliance

Electronics knowledge

PLC logic

Electrical work

Equipment installation

Education

Highschool Diploma or GED

Associate degree in electronics

Equivalent military/industrial training

Tools

Multimeters

Digital oscilloscopes

Programmable power supplies

Calibrators

Digital analyzers

Microprocessor development systems

Soldering equipment

Job description

Job Description Summary

Assemble, maintain, diagnose, repair, calibrate and modify as assigned, mechanical, electro-mechanical, electronic, micro-electronics, optical, magnetic, nuclear measurement, radiography, counting, monitoring and ultrasonic equipment. May work with prototype equipment, production equipment, nuclear instrumentation, test equipment and associated controls and instrumentation. Must be proficient in diagnosis and troubleshooting of problems in these areas along with utilizing complex test equipment to resolve component failure, program errors, calibration, or operator error. May be required to have knowledge of panel assembly and wiring, cable construction. Will be required to work on machine position/motion control systems. Will also be required to generate various forms of analysis and documentation utilizing Microsoft Windows Suite of Office products (Excel, Word, and Power Point).

Typical working schedule will be following: Friday – Sunday 7AM-7PM

Job Description

Essential Responsibilities

• Maintain, repair, calibrate and perform preventative maintenance on manufacturing and quality assurance automated systems. Examples are the following types of equipment: mechanical, electro-mechanical, machine motion control systems, electronic, micro-electronics, optical, magnetic, nuclear measurement, radiography, and ultrasonic, etc.
• Must be able to read and interpret schematics, wiring diagrams, parts lists, and ladder logic. Must be able to read and understand vendor maintenance manuals for proper calibration and maintenance methods.
• Must be skilled in troubleshooting computer hardware, software and interface peripherals. Must have a thorough knowledge and understanding of processes associated with mechanical, electronic and microprocessor based programmable controllers. Must keep abreast of state-of-the-art process control by self-study, in-plant training or vendor schooling as required.
• Utilize state-of-the-art test equipment and diagnostic software programs to troubleshoot and correct both hardware and software related problems. Must have an understanding of software programming and be able to modify and document software changes. Must be able to use a variety of test equipment such as Simpson meter, amp probe, oscilloscope, signal generators, programmable power supplies and multimeters.
• Provide training and diagnostic assistance for other personnel in work group as needed.
• Install new or modified equipment or systems and make modifications to existing systems including updating documentation.
• Must be able to generate equipment information, preventative maintenance and calibration procedures for an auditable documentation system.
• Consult with vendors, manufacturing engineers, maintenance personnel concerning equipment operation, troubleshooting and repair as required to minimize downtime.
• Must, through self-study, on-the-job training, in-plant and vendor training courses, attain a thorough knowledge of a wide variety of automated equipment and nuclear measurement techniques. Must keep abreast of the latest development in state-of-the-art electronics and computer technology.
• Work with quality assurance, engineering and other groups in resolving equipment problems.
• Keep facilities, equipment and work areas clean and orderly and adhere to good housekeeping practices and using good judgment in performing all work safely. Will be responsible for the cleanliness and orderliness of work areas.
• Follow safety regulations and procedures while performing assigned duties and tasks. Must comply with provisions set forth in the plant safety manual and use good judgment in performing all work tasks safely. Must assume a leading role in counseling trainee personnel in proper safety methods.
• Must have proficient working knowledge and ability to work to the National Electrical Code.
• Capable of lifting 50 pounds as needed.
• Perform other relevant duties as assigned.

Minimum Qualifications

• Highschool Diploma (GED) with five (5) years of experience in maintenance or fabrication of related industrial equipment. Training, education and experience should include electronic, electrical, electro-mechanical, mechanical, optical, ultrasonic, nuclear measurement, radiography and computer disciplines.
• Technical school associate degree in electronics, instrumentation, or micro-electronic solid-state technology; or equivalent military, industrial, or college training with three (3) years of relevant experience.
• Minimum of two (2) years of experience in troubleshooting, diagnosing, and repairing industrial, electrical, electronic, pneumatic, and electro-mechanical control equipment.
• Minimum of two (2) years of experience reading and interpreting drawings, schematics, ladder logic, instruction manuals and logic symbol schematics. Must be able to logically troubleshoot control systems to identify software and hardware problems.
• Minimum of two (2) years of experience and working knowledge of state-of-the‑art test equipment; such as multimeters, digital oscilloscopes, programmable power supplies, calibrators, digital analyzers, microprocessor development systems, multi‑channel analyzers, etc.
• Minimum of two (2) years of experience with basic hand tools, soldering equipment, electrical and electronics test equipment.
• Minimum of two (2) years of experience with microprocessor software structure and commands.

Eligibility Requirements

• GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).
• This role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to export‑controlled technology. GE will require proof of status prior to employment.

Desired Characteristics

• Ability to take the lead in troubleshooting and perform corrective action.
• Ability to read and understand written documents and procedures such as P&Ps, EOPs, and ESIs.
• Willingness to work a other shifts as needed to support the business High level of concentration, attention to detail and analytical ability is required to develop and troubleshoot complicated mechanical, electro‑mechanical, electronic and microprocessor‑based equipment.
• Ability to document work in order to help enhance skills of lower rate personnel.

Training Requirements

Please note that this position requires a comprehensive onboarding and training period of approximately 6 Months. During this time, the successful candidate must be available to work exclusively on the day shift, regardless of the ultimate shift assignment for the permanent role.

Additional Information

GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).

Relocation Assistance Provided: No

*The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on September 11, 2026.

Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse‑based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax‑advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro‑rated based on start date).GE Vernova Inc. or its affiliates (collectively or individually, “GE Vernova”) sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.