NDT Level III Quality Examiner

Curtiss-Wright Corporation

Summerville (SC)

On-site

USD 99,000 - 143,000

Full time

7 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Paid Time Off
401K with Employer Match and Profit ​-
Health and Wellness Benefits
Learning and Development Opportunities
Referral Program
Competitive Pay
Recognition
Employee Stock Purchase Plan
Inclusive & Supportive Culture

Job summary

Curtiss-Wright Corporation is seeking a Level III NDT Examiner to conduct inspection and testing of materials, parts, and products to ensure adherence to strength, quality, cleanliness, and endurance standards. You will perform dimensional measurements, nondestructive testing, and material verification, including receiving and shipping inspections.

The role emphasizes hands-on NDT duties, ASME/NAVSEA compliance, and collaboration with customers and internal teams to uphold safety and quality

Qualifications

  • High school diploma or equivalent.
  • Qualified Level III Examiner IAW NAVSEA requirements in Tech pub 271 and ASNT NDT Level III certified.
  • NDT Level III Inspector (VT/PT/MT/UT).
  • Experience with dimensional measurement using standard equipment such as micrometers, gauges, calipers, surface comparators, CMM, etc.

Responsibilities

  • Perform independent inspection via dimensional measurements and nondestructive testing.
  • Conduct material receipt and shipping inspections.
  • Defin es, develops and implements quality standards for receiving, in process and final inspection.
  • Prepare official NDT inspection reports submittal to the government.
  • Supervise testing, measurement, and diagnostic equipment calibration programs.

Skills

NDT Level III certified
ASME Code knowledge
NAVSEA metrology requirements
Dimensional measurement
CMM programming
VT/PT/MT/UT NDT methods
Reading drawings and specs
Welding experience SMAW GTAW GMAW
Navy Nuclear Propulsion Program
Machining experience

Education

High school diploma or equivalent
Qualified NAVSEA NAVSEA NAVSEA Level III in ASNT NDT

Tools

CMM
Micrometers, gauges, calipers

Job description

Your Challenge:

As our Level III NDT Examiner, you will conduct inspection and testing of materials, parts, and products to ensure adherence to established standards of strength, quality, cleanliness, and endurance. Inspection responsibilities include dimensional measurement, nondestructive testing, cleanliness, hardness, and positive material identification. Additionally, you will conduct material receipt inspections and product pre-shipping/packaging inspections to ensure compliance with technical requirements

We Take Care of Our People:
  • Paid Time Off
  • 401K with Employer Match and Profit Sharing
  • Health and Wellness Benefits
  • Learning and Development Opportunities
  • Referral Program
  • Competitive Pay
  • Recognition
  • Employee Stock Purchase Plan
  • Inclusive & Supportive Culture

Salary: $99,000-$143,000

Please note that the salary range information provided is a general guideline only, reflecting a position based in SC. Criteria such as the candidate’s qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer.

Your Responsibilities:
  • Perform independent inspection via dimensional measurements and nondestructive testing.
  • Perform independent inspections to validate materials, parts, and products meet established standards of strength, quality, cleanliness and endurance.
  • Conduct material receipt and shipping inspections.
  • Assist in developing inspection requirements based on component design drawings
  • Defines, develops and implements quality standards for receiving, in process and final inspection in accordance with company and contractual requirements
  • Interfaces with customers, vendors and various company departments to resolve quality problems and provide information
  • Point of contact for inspections and system validation projects
  • Formulate and maintain ASME Code Quality Control Manual in accordance with ASME requirements
  • Review and write procedures/standards for VT MT PT, and UT processes
  • Develop and manage, welder workmanship, inspection, training, and qualification programs
  • Perform and oversee annual weld and NDT/NDE program audits
  • Conduct training and examination of NDT/NDE personnel
  • Conduct surveillances of Level I and Level II inspectors
  • Ensure work is done safely and meets quality standards
  • Provide a great level of attention to detail and focus on the given task
  • Follow all safety rules and quality standards
  • Prepare official NDT inspection reports submittal to the government
  • Supervise testing, measurement, and diagnostic equipment calibration programs
What you Bring:
  • Due to DoD requirements, candidates must be US citizens
  • Must be able to obtain and maintain DoD Security clearances and approvals
  • High school diploma or equivalent
  • Qualified Level III Examiner IAW NAVSEA requirements in Tech pub 271 and ASNT NDT Level III certified
  • NDT Level III Inspector (VT/PT/MT/UT)
  • Experience with dimensional measurement using standard equipment such as micrometers, gauges, calipers, surface comparators, CMM, etc.
  • Must be proficient with ASME Code Sections II, VIII and IX.
  • Experience with SMAW, GTAW and GMAW welding
  • Ability to read and interpret documents furnished in written, oral, diagram, or schedule form including but not limited to drawings, safety rules, operating and maintenance instructions, quality manuals, and procedures
  • Experience with NAVSEA metrology requirements
  • Proficiency with standard dimensional measurement equipment such as micrometers, gauges, calipers, surface comparators, CMM, etc.
  • Experience with NAVSEA metrology requirements
  • Navy Nuclear Propulsion Program experience
  • Experience programming CMMs
  • Familiarity with NAVSEA steam plant cleanliness controls and Level I material control
  • Experience with Navy, ISO 9001, NQA-1, or 10 CFR 50 compliant quality programs
  • Machining experience, both manual and CNC
  • High-mix, low volume manufacturing experience
PREREQUISITE REQUIREMENT:
  • Ability to lift objects weighing 50 pounds to waist height and transporting 10 feet.
  • Ability to perform the following tasks: pushing, pulling, and lifting, requiring the individual to overcome initial resistance.
  • Requirement to conduct tasks involving repetitions of tool use, assessing aerobic capacity and tasks where bending, twisting, and stretching of a body segment occurs.
  • Ability to conduct tasks in which stability of body position is difficult to maintain.
Who we are:

Our Values

Environmental, Social and Governance

With a long track record of reliable, technologically superior designs and global resources, Steam & Air Solutions (SAS) is the logical choice to meet the Navy’s current and future turbine-drive and shipboard compression requirements. SAS’s equipment is used on hundreds of U.S. Navy ships to provide power and compression for propulsion, power generation, pump drives, ship service air,oxygen / nitrogen(O2N2) feed air, generator drives, and deballasting.

To learn more, please visit us at Curtiss-Wright EMS - SAS (cw-ems.com)

*Please note, benefits are country specific and may vary from location to location.

#LI-RT1

Compliance Statement

This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn.

Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition.

For US Applicants:EEO is The Law – click here for more information.

If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

NDT Level III Quality Examiner
NDT Level III Quality Examiner

EMD Curtiss Wright Electro Mechanical • United States

On-site
USD 99,000 - 143,000
Paid Time Off
401K with Employer Match and Profit Sh
Health and Wellness Benefits
+6
Machinist Inspector
Machinist Inspector

Curtiss-Wright Corporation • Summerville (SC)

On-site
USD 44,000 - 63,000
401K with Employer Match
Health and Wellness Benefits
Learning and Development Opportunities
+4
Supplier Manufacturing Engineer
Supplier Manufacturing Engineer

Curtiss-Wright Corporation • Charleston (SC)

On-site
USD 67,000 - 97,000
Paid Time Off
401K with Employer Match
Health benefits
+6
Dimensional Inspector
Dimensional Inspector

Curtiss-Wright Corporation • Pittsburgh

On-site
USD 52,000 - 68,000
Paid Time Off
401K with Employer Match
Health and Wellness Benefits
+6
Quality System Supervisor III Structural (Fabrication Facility)
Quality System Supervisor III Structural (Fabrication Facility)

Prism Maritime, LLC • Chesapeake (VA)

On-site
USD 85,000 - 110,000
Welding/NDT Program Manager
Welding/NDT Program Manager

Continental Tide Defense Systems • Norfolk (VA)

On-site
USD 80,000 - 100,000
Educational opportunities
401K plan with company match
QA NDT Inspector II: Shipyard Quality Expert
QA NDT Inspector II: Shipyard Quality Expert

San Diego Ship Repair • Bremerton (WA)

Hybrid
USD 33,000 - 49,000
Health Insurance (medical, dental, etc
Paid Time Off
Company paid holidays
+2
NDT Inspector
NDT Inspector

SMS group • Pittsburgh

On-site
USD 65,000 - 95,000
Medical coverage
401k with company match
Tuition reimbursement
Quality Assurance NDT Inspector I
Quality Assurance NDT Inspector I

San Diego Ship Repair • Bremerton (WA)

On-site
USD 33,000 - 49,000
Health Insurance (medical, dental, etc
Paid Time Off
Company paid holidays
+2
NDT Inspector
NDT Inspector

Curtiss-Wright Corporation • Shelby (NC)

On-site
USD 35,000 - 48,000
Paid Time Off
401K with Employer Match and Profit Sh
Health and Wellness Benefits
+6