Millroom Operator - Weekends Overnight Shift

R.E. Darling Co

Tucson (AZ)

On-site

USD 20,000 - 29,000

Full time

2 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

R.E. Darling Co in Tucson, AZ is seeking a Millroom Operator to produce custom rubber compounds according to prescribed procedures and schedules.

This role reports to the Millroom supervisor and requires safety, quality focus, and physical endurance, including handling hazardous materials and wearing respirator equipment. Shift: 4th (Weekend Overnight) Fri-Sun 5:00pm–5:30am; off Mon-Thu; 3/12's shift compensated for 40 hours.

Qualifications

  • High School diploma or equivalent.
  • Six months manufacturing experience.
  • Ability to complete production forms, such as product travelers.
  • Ability to follow work order instructions.
  • Ability to safely operate machines in area of assignment.
  • Sufficient visual acuity to inspect products produced.
  • Ability to read and understand technical drawings, work orders and written procedures.
  • Ability to accurately utilize measuring equipment such as calipers, thickness gauges, weigh scales, and tape measures.
  • Proficient in shop math.
  • Basic computer skills required.
  • Preferred experience with the manufacture of custom mixed rubber including Mixing, extruding, calendaring, refining, and inspecting/testing of rubber compounds and Operating millroom equipment such as two-roll mills, internal mixers, extruders, and calendars.

Responsibilities

  • Perform specific tasks associated with the manufacture of rubber and composite products.
  • Recognize product/process issues and assist with troubleshooting.
  • Maintain a clean and organized work area.
  • Support training of employees.
  • Enter job data into software data collection system.
  • Perform accurate counts of physical inventory.
  • Understand and follow safe work principles.
  • Responsible for quality and workmanship of product produced.
  • Operate equipment such as mixer, autoclaves, mills, calender, extruders, PHI presses and hand tools.

Skills

Production forms
Follow work orders
Operate machines safely
Visual inspection
Read drawings
Caliper measurement
Shop math
Basic computer skills

Education

High School diploma or equivalent
Six months manufacturing experience

Tools

Two-roll mills
Internal mixers
Extruders
Calendars

Job description

Job Details
  • Tucson, AZ 85705, USA
  • On-site
  • Travel Required: No
  • Rate: $18 USD per hour
  • Manufacturing
  • Full-Time
Description

The Millroom Operator is responsible for producing custom mixed rubber compounds in accordance with prescribed procedures and schedules. This position reports to the supervisor of the Millroom. Personal contact with others will typically involve interaction with technical and quality assurance personnel to give information on product related concerns. This position requires a person who is safety conscious, quality conscious and goal oriented. The Millroom work environment requires the operation of large processing equipment, the handling of hazardous chemicals, the physical ability to stand for extended periods with frequent stooping and bending, and repeatedly lifting items weighing up to 51 pounds. Must be capable of wearing a cartridge loaded half face respirator.

Shift: 4th (Weekend Overnight)

- Friday, Saturday, Sunday 5:00pm - 5:30am

- Off Monday-Thursday

- 3/12's shift, compensated for 40 hours

Primary Responsibilities
  • Perform specific tasks associated with the manufacture of rubber and composite products
  • Recognize product/process issues and assist with troubleshooting
  • Maintain a clean and organized work area
  • Support training of employees
  • Enter job data into software data collection system
  • Perform accurate counts of physical inventory
  • Understand and follow safe work principles
  • Responsible for quality and workmanship of product produced
Education and Experience Requirements
  • High School diploma or equivalent
  • Six months manufacturing experience
  • Required Skills
    • Ability to complete production forms, such as product travelers
    • Ability to follow work order instructions
    • Ability to safely operate machines in area of assignment
    • Sufficient visual acuity to inspect products produced
    • Ability to read and understand technical drawings, work orders and written procedures
    • Ability to accurately utilize measuring equipment such as calipers, thickness gages, weigh scales, and tape measures
    • Proficient in shop math
  • Basic computer skills required
  • Preferred experience with the manufacture of custom mixed rubber including
    • Mixing, extruding, calendaring, refining, and inspecting/testing of rubber compounds
    • Operating millroom equipment such as two-roll mills, internal mixers, extruders, and calendars
Respirator Use Requirement

Certain areas within the department may require the use of a respirator due to operational or environmental conditions. In accordance with safety regulations and proper respirator fit standards, employees assigned to these areas must be clean-shaven where the respirator seals to the face. This requirement ensures the effectiveness of the equipment and the safety of the operator.

Specific Tasks and Focus Areas
  • Perform specific tasks associated with the manufacture of rubber products
    • Assigned by the Supervisor or Lead Person
    • Execute manufacturing processes in accordance with work orders, procedures and schedules to achieve daily goals
    • Operate processing equipment such as mixer, autoclaves, mills, calender, extruders, PHI presses, & mechanical hand tools
    • Utilize measuring equipment such as calipers, thickness gages, weigh scales, and tape measures
    • Accurately complete process control paperwork (ingredient tracking on work orders)
  • Recognize product/process issues and assist with troubleshooting
    • Know when to stop processing
    • Notify supervisor/lead person
    • Assist with the problem solving process to resolve the issue
  • Maintain a clean and organized work area
    • Utilize 6S techniques (Sort, Set in Order, Shine , Standardize, Sustain, Safety)
    • Participate in the daily workgroup start up meeting
    • Responsible for maintaining a clean work area
    • Capable of generating skill versatility sheets for products
    • Cleanliness of work area/cell at all times
  • Support the training of other employees
    • As directed by the Supervisor and under close supervision & review of the Lead Person or Supervisor
    • Provide training and familiarization on the work processes and the operation of equipment
    • Completion of product training log sheets for employees being trained
  • Enter job data into software data collection system
    • Report material usage and labor when required
    • Input data using a computer on a daily basis when required
  • Perform accurate counts of physical inventory
    • Identify low inventory levels of direct materials
    • Identify low inventory levels of shop aids
    • Notify lead/supervisor of needed direct and indirect materials
  • Understand and follow safe work principles
    • Practice safe work methods
    • Wear personal protective equipment when required
    • Support Supervisor/Lead Person in maintaining a safe work environment
    • Capable of identifying safety features on Millroom equipment
  • Responsible for quality and workmanship of product
    • Perform visual/dimensional checks to ensure product quality and workmanship
    • Identify and report product problems and issues
    • Identify and report equipment problems and issues
Preferred
  • Team Player : Works well as a member of a group
  • Dedicated : Devoted to a task or purpose with loyalty or integrity
  • Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
  • This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Millroom Operator - Weekends Overnight Shift
Millroom Operator - Weekends Overnight Shift

R.E. Darling Co. • Tucson (AZ)

On-site
USD 20,000 - 29,000
Lead Operator - Millroom 2nd shift
Lead Operator - Millroom 2nd shift

R.E. Darling Co • Tucson (AZ)

On-site
USD 52,000 - 75,000
Lead Operator - Millroom 2nd shift
Lead Operator - Millroom 2nd shift

R.E. Darling Co. • Tucson (AZ)

On-site
USD 50,000 - 75,000
MIX & MILL OPERATOR 1
MIX & MILL OPERATOR 1

Polycorp • San Jose (CA)

On-site
USD 30,000 - 39,000
2nd/3rd shift Cleanroom Rubber Miller
2nd/3rd shift Cleanroom Rubber Miller

Precision Associates Inc • Minneapolis (MN)

On-site
USD 25,000 - 39,000
Medical insurance
Dental insurance
401(k) matching
+5
Millroom Operator
Millroom Operator

Da Pro Rubber • Tulsa (OK)

On-site
USD 42,000 - 63,000
Millroom Operator
Millroom Operator

BeInBA • Broken Arrow (OK)

On-site
USD 32,000 - 46,000
Millroom Operator
Millroom Operator

Da/PRO Rubber, Inc. • Broken Arrow (OK)

On-site
USD 21,000 - 30,000
E-Verify participation
Pre-employment drug testing
Night-Shift Rubber Mill Operator — Growth & Team Focus
Night-Shift Rubber Mill Operator — Growth & Team Focus

Quanex Building Products Corp. • Cambridge (OH)

On-site
USD 25,000 - 26,000
Bonus Potential
Paid Time Off & Holidays
Tuition Assistance
+4
Rubber Milling/Extruder/Set Up Operator - 3rd shift
Rubber Milling/Extruder/Set Up Operator - 3rd shift

Parker • Syracuse (IN)

On-site
USD 29,000 - 32,000
Paid holidays
401k Plan
Annual Cash Incentive Program
+2