Metrology and Dimensional Inspection Specialist — Turbine Components

DuHadaway Precision Machining

Newark (DE)

On-site

USD 37,000 - 43,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Competitive wages
Overtime opportunities
Vacation and holidays
Health insurance
401(k) with match
Climate-controlled facilities
Career advancement

Job summary

DuHadaway Precision Machining in Newark, Delaware seeks a Metrology and Dimensional Inspection Specialist to validate turbine components against drawings, BOMs, and GD&T. You’ll operate height gauges, micrometers, dial indicators, and CMM systems, document results, and support root-cause investigations.

You’ll work in a climate-controlled facility with ISO 9001 certification, receive competitive hourly pay, and enjoy benefits including vacation, holidays, health insurance, and a path for

Qualifications

  • 3–5 years of quality control/inspection experience in manufacturing or machining.
  • Ability to read blueprints, BOMs, and work instructions with GD&T callouts.
  • Hands-on setup and use of precision inspection tools; PC-controlled instruments preferred.

Responsibilities

  • Perform dimensional inspections on turbine components and WIP against drawings and specs.
  • Conduct first-article and in-process verifications on the shop floor.
  • Create and maintain inspection reports and quality records; document nonconformances.
  • Verify calibration status of instruments and communicate issues for corrective action.

Skills

Dimensional inspection
Measurement interpretation
Blueprints reading
GD&T fundamentals

Education

High school diploma or GED

Tools

ZEISS CONTURA 2
CALYPSO software
CMM equipment

Job description

Metrology and Dimensional Inspection Specialist — Turbine ComponentsLocation: Newark, DelawareCompensation: $27.00–$31.00 per hour (commensurate with experience)Employment Type: Full-TimeYour Day, Your ImpactStart your shift in our clean, climate-controlled facility as part of DuHadaway Tool and Die Shop’s ISO 9001-registered Industrial Turbine Component Repair Division. You’ll be the quality gatekeeper for complex turbine components and machined parts—validating that every critical dimension, tolerance, and feature aligns with engineering drawings, BOMs, GD&T, and customer specifications.From first-article to in-process checks, you’ll move between the inspection lab and the shop floor, using your metrology expertise and precision instruments—height gages, verniers, inside/outside/depth micrometers, dial indicators, thread and bore gages, and CMM systems—to confirm conformance and document results. You’ll collaborate with Production to resolve issues quickly, record nonconformances, verify calibration status of instruments, and help drive a culture grounded in accuracy, safety, and continuous improvement.Shifts1st Shift: 7:30 a.m. – 4:00 p.m.2nd Shift: 3:30 p.m. – 12:00 a.m.2nd Shift Differential: Additional 10%What You’ll DoPerform dimensional inspections on turbine components, manufactured parts, and work-in-process against drawings, specs, and quality standards.Conduct first-article and in-process verifications on the shop floor.Use precision tools: height gages, verniers, micrometers (inside/outside/depth), thread gages, dial indicators, bore gages, and Coordinate Measuring Machine (CMM) equipment.Interpret blueprints, engineering drawings, BOMs, work instructions, customer specifications, and GD&T callouts.Create and maintain inspection reports, quality records, and supporting documentation.Identify and communicate nonconformances; partner with Production and other teams to investigate root causes and implement corrective actions.Confirm inspection equipment suitability and calibration status prior to use.Operate overhead cranes, hoists, and material-handling equipment safely; handle components to prevent damage.Keep your area organized and safe; follow all safety policies and procedures.Participate in training and continuous-improvement initiatives.Minimum Qualifications3–5 years’ experience as a Quality Control/Inspection professional in manufacturing or machining.Proven capability with precision inspection tools and measurement interpretation.Hands-on setup/use of height gages, verniers, micrometers (ID/OD/depth), thread and bore gages, and dial indicators.Ability to read and understand blueprints, drawings, BOMs, customer specs, and work instructions.Working knowledge of GD&T fundamentals.Strong math aptitude, mechanical acumen, and problem-solving mindset.Meticulous attention to detail; consistent, high-quality workmanship.Ability to follow written and verbal instructions, processes, and procedures.Clear communicator; effective working independently and within a team.Valid driver’s license; minimum age 18; high school diploma or GED.PreferredCMM operation experience.Familiarity with ZEISS CONTURA 2 and CALYPSO software.Background inspecting industrial turbine or other large, tight-tolerance components.Experience in precision machining, component repair, or refurbishment.ISO 9001 quality-system experience.Physical RequirementsStanding, walking, bending, reaching, and repetitive movements during the workday.Ability to safely lift and move materials as needed.Manual dexterity for safe use of precision instruments and inspection tooling.Visual acuity to read drawings, instruments, and detailed inspection data.Comfort operating or working around cranes, hoists, industrial machinery, and other manufacturing equipment.Pay, Benefits, and PerksCompetitive wages with annual increases and performance incentives.Overtime opportunities.10% shift differential for 2nd Shift.40 hours of paid vacation after six months; three weeks paid vacation in the first year.Eleven paid holidays; four paid personal/sick days in the first year.Medical, dental, and vision insurance; Health Savings Account (HSA).Company-paid life insurance.401(k) with company match.Climate-controlled manufacturing facilities.Opportunities for advancement and long-term career growth.Why DuHadawayFor more than 65 years, our family-owned shop has delivered exceptional workmanship with integrity and precision. We’re mission-driven to meet customer needs through quality, timeliness, and total satisfaction—and we’re proud of the supportive, team-first environment that makes it possible.ComplianceDuHadaway Tool and Die Shop is an Equal Opportunity Employer (EOE).Successfully pass a pre-employment physical, lift assessment, and drug screening.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Precision Manual Machinist – Toolroom & Repair Specialist
Precision Manual Machinist – Toolroom & Repair Specialist

DuHadaway Precision Machining • Newark (DE)

On-site
USD 60,000 - 85,000
Competitive wages
Overtime opportunities
Paid vacation and holidays
+1
Turbine Components Metrology Specialist — Precision QC
Turbine Components Metrology Specialist — Precision QC

DuHadaway Precision Machining • Newark (DE)

On-site
USD 37,000 - 43,000
Competitive wages
Overtime opportunities
Vacation and holidays
+4
2nd Shift Manual Machinist II
2nd Shift Manual Machinist II

Dover Corporation • Houston (TX)

On-site
USD 30,000 - 41,000
Metallurgical Die Inspection and Polishing Specialist
Metallurgical Die Inspection and Polishing Specialist

Mid-West Forging and Machining • Cleveland (OH)

On-site
USD 29,000 - 40,000
Medical insurance
Dental insurance
Vision insurance
+4
Deburr Technician - First Shift
Deburr Technician - First Shift

Ushers / Aalberts surface technologies-machining solutions • South Carolina

On-site
USD 42,000 - 60,000
Health benefits
401(k) with company match
Paid time off
Machinist Sr.
Machinist Sr.

Dover Pumps & Process Solutions Segment, Inc. • Cypress (CA)

On-site
USD 55,000 - 83,000
Deburr Technician - Second Shift
Deburr Technician - Second Shift

Ushers / Aalberts surface technologies-machining solutions • South Carolina

On-site
USD 22,000 - 30,000
Precision Mechanical Quality Inspector (CMM/GD&T)
Precision Mechanical Quality Inspector (CMM/GD&T)

SM&E Manufacturing • Saint Petersburg (FL)

On-site
USD 55,000 - 75,000
401(k) retirement plan
Health, dental, vision, life, and disa
Paid time off
Inspector
Inspector

Manufacturing Inc • Killingly (CT)

On-site
USD 36,000 - 44,000
Health insurance
Incentive bonus
Competitive first shift pay
Manufacturing Engineer
Manufacturing Engineer

Quest Global • Winston-Salem (NC)

On-site
USD 60,000 - 70,000
Health insurance
401(k)
401(k) matching
+5