Mechanical Systems Engineer II - New Glenn

Blue Origin LLC; Seattle (WA); On-site; USD 99,201 - 138,880; Full time

Job summary

Blue Origin LLC is seeking an engineer to support the production and upgrades of the New Glenn launch vehicle. You will lead design, development, and testing of structural, mechanical, and fluid systems, with emphasis on production support and ensuring design conformance.

The role requires a B.S. in Mechanical or Aerospace Engineering, strong 3D modeling skills, GD&T, and experience with aerospace hardware. U.S. citizen or national status is required for sensitive work.

Qualifications

• B.S. in Mechanical or Aerospace Engineering or higher.
• Experience managing aerospace or equivalent mechanical systems elements within aircraft, spacecraft, or launch vehicles.
• Strong mechanical design and integration skills using 3D modeling tools.
• Experience with GD&T (ASME Y14.5).
• Knowledge of fabrication, integration processes, and quality control relative to tubes/piping and machined components.

Responsibilities

• Applies engineering techniques to design, install, modify, analyze, repair structural, mechanical, and fluid systems hardware.
• Role will have a strong emphasis on supporting production activities.
• Release and support of engineering artifacts across the product life cycle to support hardware fabrication, assembly, verification, test and operations.
• Implements operating procedures, resolves system malfunctions, and provides technical information.
• Lead Root Cause and Corrective action investigations into hardware failures to facilitate smooth production operations across the launch vehicle.

Skills

3D CAD

FEA analysis

GD&T

Mechanical design

Education

B.S. in Mechanical or Aerospace Engineering

Tools

Creo

ANSYS

Windchill PLM

Job description

Application close date:Applications will be accepted on an ongoing basis until the requisition is closed.At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We’re working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight!This role supports the development and operations of New Glenn, a single-configuration, heavy-lift orbital launch vehicle capable of routinely carrying people and payloads to low-Earth orbit, geostationary transfer orbit, cislunar, and beyond. Its first stage is fully reusable, and the vehicle was designed from the beginning to be human-capable.This role supports the production and upgrades of New Glenn, a single-configuration heavy-lift launch vehicle capable of carrying payloads to Earth’s orbit and beyond. Engineered with a reusable first stage and a seven-meter payload fairing, New Glenn is building the road to space.As part of a small, hard-working, and accomplished team of experts you will lead the design, development, and test various spaceflight systems. You will share toward the team’s impact on all aspects of structures, mechanical, and fluid systems. This position will directly impact the history of space exploration and will require your dedicated commitment and detailed attention towards safe and repeatable spaceflight.We are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflight. Passion for our mission and vision is required!Responsibilities:Applies engineering techniques to design, install, modify, analyze, repair structural, mechanical, and fluid systems hardware.Role will have a strong emphasis on supporting production activities.Experience in 3D CAD programs (Creo preferred)Experience in Finite Element Analysis (FEA) tools to analyze pressurized systems and primary/secondary structures (ANSYS preferred)Specifically identifying available work and resolving roadblocks to facilitate production tasks.Release, and support of engineering artifacts across the product life cycle to support hardware fabrication, assembly, verification, test and operations. Implements’ operating procedures, resolves system malfunctions, and provides technical information.Specifies system components or directs modification of products to ensure conformance with engineering design and performance specifications.Lead Root Cause and Corrective action investigations into hardware failures to facilitate smooth production operations across the launch vehicle.Minimum Qualifications:B.S. degree or higher in Mechanical or Aerospace EngineeringRecent experience managing aerospace or equivalent type mechanical systems elements within aircraft, spacecraft, or launch vehicles. Candidates with various levels of experience are welcome to apply.Strong mechanical design and integration skills using 3D modeling toolsExperience with GD&T (ASME Y14.5)Ability to earn trust, maintain positive and professional relationships, and contribute to a culture of inclusionKnowledge of fabrication, integration processes, and quality control relative to tubes/piping and machined componentsMust be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylumPreferred Qualifications:2-4 years of recent experience managing aerospace or equivalent type mechanical systems elements within aircraft, spacecraft, or launch vehicles.2+ years direct project management experience; including schedule, cost, risk, performance, change and configuration management, and supplier relationsExperience across the full product development lifecycle: concept definition, architecture, requirements capture and development, implementation, verification, system integration, qualification and releaseExperience in primary flight control actuator designExperience in aerospace hydraulic system component design or system architecture designExperience in aerospace deployable devices design such as doors, landing gear or sensorsExperience in spacecraft separation systems designExperience in Creo (Pro-E) and Windchill PLMExperience in structural FEA using ANSYS, NASTRAN or similar tools.Base Pay Range for:WA applicants is $99,201.00 - $138,880.35Other site ranges may differCulture StatementDon’t meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you’re excited about this role but your past experience doesn’t align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles.Export Control RegulationsApplicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Background CheckRequired for all positions: Blue’s Standard Background CheckRequired for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installationRequired for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physicalBenefitsBenefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program.Stock Options for all regular employees (working at least 20 hours/week)Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays.Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details.Equal Employment OpportunityBlue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws.Affirmative Action and Disability AccommodationApplicants wishing to receive information on Blue Origin’s Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at [e-mail] . Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.