Mechanical Design Engineer

AMPAM

California

Hybrid

USD 70,000 - 130,000

Full time

10 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

AMPAM Parks Mechanical, Inc. is seeking a Design Engineer to develop and lead MEP design for multi‑family projects. Responsibilities include creating construction documents, performing calculations, and coordinating with architectural and structural teams.

The role offers hybrid/onsite work with initial training in Carson, CA and opportunities across Greater Los Angeles, OC and Inland Empire areas. Relevant engineering degree and CAD/BIM proficiency required.

Qualifications

  • Bachelor's degree in Mechanical, Electrical, or Architectural Engineering from an accredited program.
  • Experience level varies by Design Engineer I/II/III.
  • Proficiency in AutoCAD and Revit; familiarity with Navisworks/Bluebeam/BIM 360 preferred.

Responsibilities

  • Develop plumbing, HVAC, and electrical designs for multi‑family buildings from concept through construction documents.
  • Perform engineering calculations including heating/cooling loads and electrical load analysis.
  • Prepare and review drawings and specifications using AutoCAD and Revit; coordinate with other disciplines.

Skills

Communication
Team collaboration
Project management

Education

Bachelor's degree in Mechanical, Electrical, or Architectural Engineering

Tools

AutoCAD
Revit
Navisworks
Bluebeam
BIM 360

Job description

This position is based in the Greater Los Angeles/Orange County/Inland Empire areas. AMPAM is open to considering onsite, hybrid, or remote work arrangements for qualified candidates based on skills, experience, and the needs of the role. Candidates (even base remotely) must reside within the Greater Los Angeles/Orange County/Inland Empire area and be available to work onsite at our Carson, CA for initial training and as business needs require.

Who We Are

AMPAM is a leading Mechanical, Electrical, and Plumbing (MEP) contractor serving large-scale multifamily and commercial projects across California. With 1,500 employees across multiple business units, we are committed to delivering quality, safety, and excellence in every project.

Job Summary

The Design Engineer/Sr. Design Engineer (Design Engineer I / II / III) supports, develops, and leads the engineering and design of mechanical, electrical, and plumbing (MEP) systems for multi‑family new construction projects. Depending on experience and level hired, this position may perform work under the guidance of senior engineers, independently manage assigned projects, or lead complex engineering efforts while mentoring junior team members.

Responsibilities include preparing engineering calculations, construction documents, AutoCAD and Revit models, coordinating with project teams, ensuring compliance with applicable building codes and engineering standards, and supporting successful project delivery from concept through construction.

Placement at the Design Engineer I, II, or III level will be determined based on the selected candidate's education, experience, technical expertise, and demonstrated capabilities.

Key Responsibilities Include: (But not limited to the following)
  • Develop plumbing, HVAC, and electrical designs from concept through construction documents for multi‑family residential buildings.
  • Perform engineering calculations, including heating/cooling loads, ventilation rates, equipment selection, duct/pipe sizing, and electrical load analysis.
  • Prepare and review technical drawings, schedules, and specifications using AutoCAD and Revit.
  • Apply relevant codes and standards (CPC, CMC, NEC, ASHRAE, ASPE, IECC, NFPA, ADA, and local building codes).
  • Review and coordinate designs with architectural, structural, and other engineering disciplines.
Project Coordination
  • Serve as the primary design contact for assigned projects, coordinating with project managers, clients, and contractors.
  • Participate in design and coordination meetings to resolve technical issues and ensure design intent is maintained.
  • Support construction administration, including reviewing submittals, responding to RFIs, and performing field observations.
Quality & Mentorship
  • Conduct QA/QC reviews of drawings and documents prepared by junior staff or technicians.
  • Provide technical guidance and mentoring to Design Engineer I and Design Technician team members.
  • Contribute to the development and improvement of company design standards, processes, and templates.
Qualifications
Education & Experience
  • Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or Architectural Engineering from an accredited program.
  • Experience requirements vary based on level hired:
  • Design Engineer I: 0–3 years of MEP design or building systems engineering experience (internships or co‑op experience acceptable).
  • Design Engineer II: Approximately 3+ years of relevant MEP design experience for multi‑family or commercial building systems.
  • Design Engineer III: Approximately 6+ years of progressively responsible MEP design experience for multi‑family or commercial building systems.
  • Engineer‑in‑Training (EIT) certification preferred for Design Engineer I, required for Design Engineer II, and Professional Engineer (PE) license or progress toward licensure preferred for Design Engineer III.
  • 3–6 years of relevant experience in MEP design for building systems (multi‑family or mixed‑use projects preferred).
  • Proficiency in AutoCAD and Revit required; familiarity with Navisworks, Bluebeam, or BIM 360 preferred.
  • Strong understanding of HVAC, plumbing, and electrical system design, including energy efficiency and sustainability considerations.
  • Ability to perform and review engineering calculations with accuracy and sound judgment.
  • Excellent communication and collaboration skills across multiple project stakeholders.
  • Highly organized, with the ability to manage multiple priorities and meet deadlines.
  • Working knowledge of Microsoft Office (Excel, Word, Outlook).
Applicants must be currently authorized to work in the U.S. on a full‑time basis without future employment sponsorship
Compensation

Compensation for this position ranges from $34.00 per hour ($70,000 annually) to $130,000+ annually, depending on the position level, qualifications, experience, and demonstrated skills. Design Engineer I positions are classified as non‑exempt (hourly). Design Engineer II and Design Engineer III positions are classified as exempt (salaried).

Final job level, compensation, and classification will be determined based on the selected candidate's experience, technical expertise, and overall qualifications.

Recruitment Agencies

AMPAM is not engaging external recruitment agencies for this position at this time. Please do not submit resumes or candidate information to AMPAM employees or hiring managers. AMPAM does not accept unsolicited agency submissions, and any unsolicited resumes received will be considered the property of AMPAM without obligation to pay a placement or referral fee.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Design Engineer/Sr. Design Engineer
Design Engineer/Sr. Design Engineer

AMPAM Parks Mechanical, Inc. • Carson (CA)

On-site
USD 70,000 - 130,000
Senior MEP Design Engineer for Multifamily Projects
Senior MEP Design Engineer for Multifamily Projects

AMPAM Parks Mechanical, Inc. • Carson (CA)

Hybrid
USD 70,000 - 130,000
Design Engineer/Sr. Design Engineer
Design Engineer/Sr. Design Engineer

AMPAM • Corona (CA)

On-site
USD 70,000 - 130,000
Design Engineer I
Design Engineer I

ADP, Inc. • Carson (CA)

On-site
USD 48,000 - 51,000
Sr. Electrical Design Engineer
Sr. Electrical Design Engineer

AMPAM • El Cajon (CA)

On-site
USD 90,000 - 120,000
Design Technician II
Design Technician II

AMPAM Parks Mechanical, Inc. • California

On-site
USD 34,000 - 40,000
Sr. Electrical Design Engineer
Sr. Electrical Design Engineer

AMPAM Parks Mechanical, Inc. • El Cajon (CA)

On-site
USD 80,000 - 110,000
MEP Design Technician II: Drafting & Coordination
MEP Design Technician II: Drafting & Coordination

Ampam-Parks-Mechanical • Carson (CA)

On-site
USD 25,000 - 29,000
MEP Design Technician II - CAD & Revit for Multi-Family
MEP Design Technician II - CAD & Revit for Multi-Family

AMPAM Parks Mechanical, Inc. • Carson (CA)

Hybrid
USD 34,000 - 40,000
Design Technician II
Design Technician II

AMPAM PARKS MECHANICAL • Carson (CA)

On-site
USD 25,000 - 29,000