Mechanical Automation & Maintenance Fitting Apprentice

AbbVie Inc.

Missouri

On-site

USD 28,000 - 40,000

Full time

44 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

AbbVie in Westport, Missouri is seeking a Mechanical Automation & Maintenance Fitting Apprentice to join our Engineering team. You will train in the maintenance, repair and optimisation of GMP equipment in a pharmaceutical processing facility, covering mechanical fitting, automation and equipment maintenance.

During the program you will learn operation and maintenance of mechanical and electrical equipment, perform troubleshooting and continuous improvement, and gain exposure to setup, testing

Qualifications

  • Educational standard – Grade D or higher in 5 subjects at Leaving Certificate level. Physics desirable but not essential.
  • Relevant experience in engineering roles or other industrial/commercial roles desirable but not essential.
  • Practical electrical and mechanical aptitude and ability to learn new skills.

Responsibilities

  • Engage in an on- and off-the-job learning program delivered by both Solas and AbbVie. During this time work under the guidance of the relevant ENG department to learn and provide support to the department.
  • Provide support to production systems and control systems related issues. Support tasks include: execution of daily checks; execution of routine Preventative Maintenance Work orders; daily troubleshooting of issues as required; support of engineering initiatives and projects as required; completion of Workshop/Toolroom tasks as required.
  • Support Maintenance shutdown program for production equipment & systems
  • Support maintenance and installation plans for new equipment, provide reliability and maintainability specifications for new equipment, input to the development of support plans for new equipment.
  • Support of the Maintenance Excellence Program (MEP) KPI’s parameters such as asset utilization, maintenance cost, site maintenance compliance, schedule etc.
  • Gain knowledge in methods - RCA (Root Cause Analysis) - A3 solving problems to prevent and eliminate the likelihood or frequency of failures in site system and determining the use of predictive maintenance technologies.
  • Support internal audits on engineering systems; support external audits and ensure adherence to company safety and quality standards, policies, and procedures.
  • Participate constructively as a member of the dept, keeping everyone informed and proactively share and receive knowledge and expertise within the team.

Skills

Electrical aptitude
Mechanical aptitude
Ability to learn

Education

Leaving Certificate (Five subjects, Grade D or higher)

Job description

Company Description

About AbbVie

AbbVie's mission is to discover and deliver innovative medicines and solutions that solve serious health issues today and address the medical challenges of tomorrow. We strive to have a remarkable impact on people's lives across several key therapeutic areas including immunology, oncology and neuroscience - and products and services in our Allergan Aesthetics portfolio. For more information about AbbVie, please visit us at www.abbvie.com. Follow @abbvie on LinkedIn, Facebook, Instagram, X and YouTube.

Job Description

Welcome to AbbVie!

AbbVie employees work every single day to discover and address many of the world's most pressing health challenges. Our work helps people live better lives. When you have patients depending on your solutions, you look for the best people and, when we find them, we make it our business to treat them well.

We have a vacancy for a Mechanical Automation & Maintenance Fitting Apprentice to join our Engineering team at AbbVie Westport. You’ll be part of a multifunctional Engineering team, working closely with engineering leaders to develop your skills in the maintenance, repair and optimisation of GMP equipment in a pharmaceutical processing facility. Your training will cover mechanical fitting, automation and equipment maintenance, in line with all safety, regulatory and operational requirements.

As part of your new and exciting role you will be trained on the operation and maintenance of a wide variety of mechanical and electrical equipment, troubleshooting, continuous improvement, and other technical areas including component replacement and the safe use of tools and workshop equipment. At the end of your apprenticeship, you will be familiar with GMP manufacturing equipment in a pharmaceutical manufacturing plant and have the ability to set-up, test, troubleshoot and maintain a wide variety of Pharmaceutical Solid Dosing Equipment.

By the end of this apprenticeship, you’ll be trained and qualified as a Mechanical Automation & Maintenance Fitter. You’ll be able to install, maintain, fault-find, test and commission mechanical and automated equipment across the commercial and industrial sectors. This qualification will provide a strong foundation for progressing and advancing your career.

Responsibilities
  • Engage in an On and Off the job learning program delivered by both Solas and AbbVie. During this time work under the guidance of the relevant ENG department to learn and provide support to the department.
  • Provide support to production systems and control systems related issues. Support tasks include:
    • Execution of daily checks.
    • Execution of routine Preventative Maintenance Work orders.
    • Daily trouble shooting of issues as required.
    • Support of engineering initiatives and projects as required.
    • Completion of Workshop/Toolroom tasks as required.
  • Support Maintenance shutdown program for production equipment & systems
  • Support maintenance and installation plans for new equipment, provide reliability and maintainability specifications for new equipment, input to the development of support plans for new equipment.
  • Support of the Maintenance Excellence Program (MEP) key performance indicators (KPI’s) parameters such as asset utilization, maintenance cost, site maintenance compliance, schedule etc.
  • Gain knowledge in methods - RCA (Root Cause Analysis) - A3 solving problems to prevent and eliminate the likelihood or frequency of failures in site system and determining the use of predictive maintenance technologies.
  • Support internal audits on engineering systems; support external audits and ensure adherence to company safety and quality standards, policies, and procedures.
  • Participate constructively as a member of the dept, keeping everyone informed and proactively share and receive knowledge and expertise within the team.
  • Gain proficiency in the use of Computer Management Maintenance System (Maximo), to create WO’s, new or updated PM’s, new assets, inventories, and spare parts.
  • Support the development and update of documentation for the department.
  • Adheres to and supports all Quality, EHS&E standards, procedures, and policies.
  • Work closely with vendors and contractors on the technical and engineering systems improvements and preventative maintenance services through SLA (Service level Agreements)
Supervision Received
  • Working under the guidance of the Engineering department leadership personnel.
  • Training and support functions will be given and clearly outlined.
Additional Information

AbbVie is an equal opportunity employer and is committed to operating with integrity, driving innovation, transforming lives and serving our community. Equal Opportunity Employer/Veterans/Disabled.

Qualifications

Qualifications

  • Educational standard – Grade D or higher in 5 subjects at Leaving Certificate level. Physics desirable but not essential.
  • Relevant experience of engineering roles or other industrial/commercial roles desirable but not essential.
  • Practical electrical and mechanical aptitude and ability to learn new skills.
Additional Information

AbbVie is an equal opportunity employer and is committed to operating with integrity, driving innovation, transforming lives and serving our community. Equal Opportunity Employer/Veterans/Disabled.

US & Puerto Rico only - to learn more, visit https://www.abbvie.com/join-us/equal-employment-opportunity-employer.html

US & Puerto Rico applicants seeking a reasonable accommodation, click here to learn more:

https://www.abbvie.com/join-us/reasonable-accommodations.html

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Mechanical Automation & Maintenance Fitting Apprentice
Mechanical Automation & Maintenance Fitting Apprentice

AbbVie Inc. • Westport (CT)

On-site
USD 40,000 - 60,000
Maintenance Supervisor
Maintenance Supervisor

AbbVie Inc. • Kansas City (MO)

On-site
USD 75,000 - 100,000
Maintenance Technician Fitter Night shift
Maintenance Technician Fitter Night shift

AbbVie Inc. • Kansas City (MO)

On-site
USD 75,000 - 110,000
Maintenance Technician (Electrical) - Evening Shift
Maintenance Technician (Electrical) - Evening Shift

AbbVie Inc. • Kansas City (MO)

On-site
USD 65,000 - 85,000
Associate Director Maintenance
Associate Director Maintenance

ABBVIE • Town of Westport (WI)

On-site
USD 150,000 - 190,000
Maintenance Shift Supervisor - Weekends
Maintenance Shift Supervisor - Weekends

AbbVie Inc. • Town of Westport (WI)

On-site
EUR 65,000 - 85,000
Director of Maintenance & Reliability
Director of Maintenance & Reliability

AbbVie Inc. • Town of Westport (WI)

On-site
USD 150,000 - 190,000
Aseptic Maintenance Technician II, MD Fill (A1 Shift)
Aseptic Maintenance Technician II, MD Fill (A1 Shift)

NCSL International • Waco (TX)

On-site
USD 21,000 - 34,000
Medical insurance
Dental insurance
401(k)
+1
Maintenance Technician IV - UD Fill
Maintenance Technician IV - UD Fill

AbbVie Inc. • Waco (TX)

On-site
USD 33,000 - 44,000
Paid time off
Medical/dental/vision insurance
401(k)
+1
Maintenance Technician II UD Fill B1 Shift
Maintenance Technician II UD Fill B1 Shift

AbbVie • Waco (TX)

On-site
USD 42,000 - 64,000
Paid time off
Medical insurance
401(k)