Matti Inkjet Operator

GPM Investments, LLC; Robbinsville Township (NJ); On-site; USD 42,000 - 66,000; Full time

Benefits offered by this job

Life insurance

Long-term disability

Paid time off

401(k) with match

Employee assistance program

Employee recognition

Job summary

Command Robbinsville is seeking an experienced press operator to safely and efficiently run Matti Inkjet book edge printers, perform setup, and ensure production schedules are met.

You will monitor ink levels, troubleshoot issues, maintain equipment, document production data, and collaborate with Production Planning, Prepress, Bindery, Shipping and Maintenance. HP Inkjet experience and book manufacturing background are preferred; the job requires lifting up to 50 pounds.

Qualifications

• 2+ years of experience operating digital or offset printing equipment, HP experience preferred.
• Mechanical aptitude with basic troubleshooting and equipment adjustments.
• Ability to read and follow SOPs, production tickets, and work instructions.
• Strong attention to detail and commitment to quality.
• Basic computer skills and ability to enter production information into electronic systems.
• Experience in book manufacturing or commercial printing.
• Knowledge of color management and paper handling.
• Familiarity with Lean Manufacturing principles and continuous improvement practices.
• Experience with HP Inkjet or similar high-speed printing equipment.

Responsibilities

• Safely operate Matti Inkjet book edge printing equipment.
• Perform press setup and make-ready according to production tickets, SOPs, and work instructions.
• Set up and operate pre-press and post-press equipment as required.
• Monitor ink levels and ensure the press is properly prepared for production.
• Start, monitor, and complete production jobs while meeting established production schedules.
• Verify job specifications and production information before beginning each job.
• Perform quality inspections throughout each production run.
• Monitor print density, color consistency, registration, page sequence, image quality, and barcode readability when applicable.
• Identify and address quality issues promptly to prevent defective product.
• Stop production when product quality does not meet company standards.
• Remove and properly handle defective product according to company procedures.
• Make routine press adjustments to maintain consistent print quality and production performance.
• Respond to machine alarms and production issues in a timely manner.
• Troubleshoot common issues such as web breaks, registration problems, color variation, printhead defects, and paper-feeding issues.
• Communicate and elevate mechanical or electrical problems to Maintenance or Production Management.
• Perform daily operator maintenance and routine equipment checks.
• Clean the press and surrounding equipment according to established procedures.
• Complete assigned lubrication and preventive maintenance tasks.
• Maintain a clean, organized, and safe work area.
• Accurately record production quantities, waste, downtime, roll changes, maintenance activities, and quality issues.
• Complete all required production paperwork and electronic records accurately and on time.
• Communicate production issues or discrepancies to the appropriate supervisor.
• Communicate effectively with supervisors, coworkers, and other departments.
• Work closely with Production Planning, Prepress, Bindery, Shipping, and Maintenance to ensure smooth production flow.
• Participate in shift turnover meetings and provide accurate information regarding job status, equipment conditions, and outstanding issues.
• Follow all company safety policies, procedures, and PPE requirements.
• Report unsafe conditions, equipment concerns, or workplace hazards immediately.
• Follow proper Lockout/Tagout (LOTO) procedures when required.
• Operate all equipment in accordance with established safety procedures.

Skills

Printing experience

Mechanical aptitude

SOP reading

Attention to detail

Basic computer skills

Fast-paced environment

Book manufacturing experience

Color management knowledge

Lean manufacturing

HP Inkjet equipment

Job description

ABOUT US: Command Companies is among the country’s largest privately held printers. Our size gives us the capacity to meet all of your print, digital and packaging needs. But it’s our capabilities that really set us apart. We have invested in the equipment, systems, software and subject matter expertise to deliver unparalleled value to our clients. And our financial strength allows us to be nimble and to invest as necessary to respond to market trends and client opportunities.

Command Robbinsville is state-of-the-art book manufacturing facility, ideal for producing educational books, computer books, catalogs, annual reports, and directories.

Key Responsibilities

• Safely and efficiently operate Matti Inkjet book edge printing equipment .
• Perform press setup and job make-ready according to production tickets, SOPs, and work instructions.
• Set up and operate pre-press and post-press equipment as required.
• Monitor ink levels and ensure the press is properly prepared for production.
• Start, monitor, and complete production jobs while meeting established production schedules.
• Verify job specifications and production information before beginning each job.

2. Quality Control

• Perform quality inspections throughout each production run.
• Monitor print density, color consistency, registration, page sequence, image quality, and barcode readability when applicable.
• Identify and address quality issues promptly to prevent defective product.
• Stop production when product quality does not meet company standards.
• Remove and properly handle defective product according to company procedures.

3. Press Adjustments & Troubleshooting

• Make routine press adjustments to maintain consistent print quality and production performance.
• Respond to machine alarms and production issues in a timely manner.
• Troubleshoot common issues such as web breaks, registration problems, color variation, printhead defects, and paper-feeding issues.
• Communicate and elevate mechanical or electrical problems to Maintenance or Production Management.

4. Equipment Care & Maintenance

• Perform daily operator maintenance and routine equipment checks.
• Clean the press and surrounding equipment according to established procedures.
• Complete assigned lubrication and preventive maintenance tasks.
• Maintain a clean, organized, and safe work area.

5. Production Documentation

• Accurately record production quantities, waste, downtime, roll changes, maintenance activities, and quality issues.
• Complete all required production paperwork and electronic records accurately and on time.
• Communicate production issues or discrepancies to the appropriate supervisor.

6. Teamwork & Communication

• Communicate effectively with supervisors, coworkers, and other departments.
• Work closely with Production Planning, Prepress, Bindery, Shipping, and Maintenance to ensure smooth production flow.
• Participate in shift turnover meetings and provide accurate information regarding job status, equipment conditions, and outstanding issues.

7. Safety

• Follow all company safety policies, procedures, and PPE requirements.
• Report unsafe conditions, equipment concerns, or workplace hazards immediately.
• Follow proper Lockout/Tagout (LOTO) procedures when required.
• Operate all equipment in accordance with established safety procedures.

Qualifications:

• 2+ years of experience operating digital or offset printing equipment ; HP experience strongly preferred.
• Mechanical aptitude with the ability to perform basic troubleshooting and equipment adjustments.
• Ability to read and follow SOPs, production tickets, and work instructions.
• Strong attention to detail and commitment to quality.
• Basic computer skills and ability to enter production information into electronic systems.
• Ability to work effectively in a fast-paced manufacturing environment.
• Experience in book manufacturing or commercial printing
• Knowledge of digital printing processes, color management, and paper handling.
• Familiarity with Lean Manufacturing principles and continuous improvement practices.
• Experience with HP Inkjet or similar high-speed digital printing equipment.

Physical & Work Requirements:

• Ability to stand and walk for extended periods during the workday.
• Ability to lift and carry up to 50 pounds .
• Ability to work around industrial machinery, moving equipment, and manufacturing noise.
• Ability to work overtime, weekends, and rotating shifts as production needs require.
• Ability to maintain focus and attention to detail while working in a fast-paced production environment.

Command Robbinsville is proud to offer competitive pay and great benefits!

• Company-paid life insurance
• Voluntary long-term disability coverage
• Paid time off
• 401(k) with company match
• Employee Assistance Program
• Employee recognition programs
• And more!

As an EQUAL OPPORTUNITY/AFFIRMATIVE ACTION EMPLOYER, Command Companies and its affiliates do not discriminate against applicants or employees because of their race, color citizenship status, national origin, ancestry, gender (except where gender is a bonafide occupational qualification), sexual orientation, age, religion, creed, marital status, veteran status, domestic violence victim status, political affiliation or any other factor protected by federal, state or local law.

Do you have experience in the printing industry?

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.