Material Certification (MTR/MTC) & Documentation Associate

High Tech Machine Co., LLC.

Houston (TX)

Presencial

USD 55 000 - 75 000

Tempo integral

há 12 horas
Torna-te num dos primeiros candidatos

Recebe uma resposta deste empregador

O teu currículo e carta de apresentação, adaptados exatamente ao que estão a contratar.

Ultrapassa os filtros ATS

Vantagens oferecidas por esta oferta de emprego

Medical, dental, and vision insurance
Paid holidays and vacation
401(k) retirement plan
Paid on-the-job training

Resumo da oferta

High Tech Machine (HTM) in Houston seeks an experienced Material Certification & Documentation Associate for its Quality Department. The role is desk-based, reviewing MTRs/MTCs against customer specs, purchase orders, and technical requirements to ensure material compliance.

The candidate will maintain electronic traceability, process material receipts, and assemble customer certification packages. Strong attention to detail and communication skills are essential for final management review.

Qualificações

  • Direct experience interpreting and verifying MTR/MTC data against customer material specifications is essential.
  • High school diploma or GED is required.
  • Experience reviewing MTRs/MTCs for materials used in the oil and gas industry is preferred.
  • Ability to read and interpret customer specifications, PO requirements, and technical docs.
  • Familiarity with material grades, heat numbers, and traceability is desirable.

Responsabilidades

  • Review MTRs/MTCs for raw materials against customer specs and POs.
  • Read and interpret customer specifications, drawings, and requirements.
  • Compare certifications with orders and engineering docs.
  • Verify heat numbers, identifications, and traceability data.
  • Document findings and report to top management for approval.
  • Process material receipts in the inventory system and maintain traceability records.
  • Prepare material certification packages for customer orders and CoCs when needed.
  • Support audits with accurate certification records and NCR handling.
  • Assist with continual improvement of documentation accuracy and efficiency.

Conhecimentos

MTR/MTC review
Material specs interpretation
Heat numbers & traceability
Engineering drawings
Inventory systems
Documentation control
Attention to detail
Communication skills
Independence
PDFs & spreadsheets
Quality compliance
HS diploma or GED

Formação académica

High school diploma

Ferramentas

Inventory software
PDF & spreadsheets
Electronic documentation systems

Descrição da oferta de emprego

High Tech Machine (HTM) is seeking an experienced, highly detail-oriented Material Certification & Documentation Associate to join our Quality Department.

This is a staff-level, non-supervisory primarily desk-based position requiring prior experience reviewing Material Test Reports (MTRs) and Material Test Certificates (MTCs) against customer material specifications, particularly within the oil and gas industry.

The primary responsibility is to carefully compare material certification data—including chemical composition, mechanical properties, heat treatment information, and applicable test results—against customer specifications, purchase orders, and other technical requirements.

The specialist will identify discrepancies, document findings, and report results directly to HTM's top management for final review and material acceptance decisions.

Additional responsibilities include processing material receipts in our computerized inventory system, maintaining material traceability records, and preparing accurate material certification packages for customer orders.

Important: This is not a QC Inspector, Quality Manager, supervisory, warehouse, or physical material handling position. The work is primarily computer-based and involves extended periods of focused, repetitive technical document review. Applicants should be comfortable performing detailed, accuracy-driven work throughout the day.

Key Responsibilities
Material Certification Review & Compliance:
  • Review and evaluate MTRs and MTCs for raw materials used in oil and gas precision machining applications.
  • Read and interpret customer material specifications, purchase orders, engineering drawings, and applicable technical requirements.
  • Compare material certifications against customer purchase orders, engineering drawings, material specifications, and other applicable requirements.
  • Verify heat numbers, material identification, and traceability information against receiving records and customer job requirements.
  • Identify missing information, incorrect specifications, discrepancies, or noncompliant certification data.
  • Document review findings and report material compliance concerns to top management for final evaluation and approval.
Electronic Material Receiving & Traceability
  • Process raw material receiving transactions in the company's computerized inventory management system using documentation supplied by the Shipping & Receiving Department.
  • Verify that receiving documentation, purchase orders, and material certifications contain consistent and accurate information.
  • Enter and maintain material grades, heat numbers, quantities, certification references, and receiving records.
  • Associate the correct MTRs/MTCs and supporting documents with the corresponding material inventory records.
  • Maintain accurate electronic material traceability records.
  • Coordinate with Shipping & Receiving, Purchasing, and Quality personnel to resolve documentation discrepancies.
Customer Certification Packages & Documentation
  • Review customer purchase orders, job travelers, and documentation requirements for individual customer orders.
  • Compile, organize, and verify material certifications and supporting quality records.
  • Confirm that certification packages correspond to the materials actually used for each customer order.
  • Prepare Certificates of Conformance/Compliance (CoCs) when required.
  • Review completed documentation packages for accuracy, completeness, and traceability before shipment.
  • Upload, download, and maintain documents through customer portals and internal electronic systems.
  • Maintain organized electronic records for completed customer orders.
Quality Documentation & Compliance Support
  • Maintain material certification and quality records in accordance with HTM's established Quality Management System.
  • Document certification discrepancies and assist with material-related Nonconformance Reports (NCRs) as needed.
  • Communicate with suppliers and internal departments regarding missing or incorrect documentation.
  • Support quality audits by providing accurate certification and material traceability records.
  • Assist with improvements to documentation accuracy, organization, and efficiency.
  • Perform other related duties as assigned.
Required Qualifications

Direct experience interpreting and verifying MTR/MTC data against customer material specifications is essential for this position.

  • High school diploma or GED.
  • Previous hands‑on experience reviewing MTRs/MTCs, preferably for materials used in the oil and gas industry.
  • Demonstrated ability to read, understand, and interpret customer material specifications and purchase order requirements.
  • Ability to compare chemical compositions, mechanical properties, heat treatment information, and testing results against applicable material requirements.
  • Knowledge of material grades, heat numbers, and material traceability.
  • Ability to identify missing information, discrepancies, and potentially noncompliant material certifications.
  • Ability to read and interpret engineering drawings, job travelers, purchase orders, and technical documentation.
  • Experience with computerized inventory systems, electronic documentation, or technical recordkeeping.
  • Proficiency with PDF documents, spreadsheets, electronic filing systems, and general computer applications.
  • Exceptional attention to detail, accuracy, and organizational skills.
  • Ability to remain focused while performing repetitive, detail‑intensive computer and document review tasks.
  • Ability to follow established procedures, work independently on assigned tasks, and communicate findings to management.
  • Strong written and verbal communication skills and ability to work effectively with others.
Preferred Qualifications
  • Experience in a custom precision machine shop serving the oil and gas industry.
  • Familiarity with ASTM, ASME, API, and other applicable material specifications.
  • Experience processing electronic material receipts and maintaining inventory traceability records.
  • Experience preparing customer material certification and quality documentation packages.
  • Familiarity with ISO 9001:2015 Quality Management System requirements.
  • Experience with material‑related Nonconformance Reports (NCRs).
  • Knowledge of material testing methods, including tensile, hardness, Charpy impact, and nondestructive examination (NDE).
  • Experience with customer documentation portals and electronic quality record management systems.
Work Environment & Reporting Structure
  • This is a full‑time, primarily office‑based position within our precision machining facility.
  • Most of the workday involves reviewing technical documentation, comparing certification data against specifications, processing electronic records, and preparing customer documentation packages.
  • The position reports directly to HTM's top management. It has no direct reports, supervisory responsibilities, or management authority. Final material acceptance decisions are made by top management.
  • The Shipping & Receiving Department handles the physical receipt, identification, and tagging of incoming raw materials. This position handles the associated electronic receiving transactions, certification review, and documentation control.
  • Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the position.
About High Tech Machine

High Tech Machine (HTM) is a family‑owned precision machine shop in northwest Houston, Texas, established in 1995. We manufacture complex, high‑precision components for the Oil & Gas, Aerospace, Mining, and Marine industries, serving customers throughout the United States and internationally.

What We Do

Our work ranges from one‑off prototypes and challenging setups to high‑volume production. We operate CNC machining centers, CNC horizontal and vertical lathes, manual lathes and mills, and 3-, 4-, and 5‑axis machining equipment.

We machine materials including Inconel, duplex and other stainless steels, carbon steels, aluminum, brass, and bronze.

HTM is ISO 9001:2015 certified, and our work is guided by established quality procedures, material traceability, and customer requirements.

Our Commitment

"Delivering superior quality every time."

We value employees who take pride in accurate work, support their teammates, and are committed to quality and continual improvement.

Compensation & Benefits
  • Compensation based on experience and qualifications.
  • Medical, dental, and vision insurance, plus additional voluntary benefit options.
  • Paid holidays and paid vacation.
  • 401(k) retirement plan.
  • Paid on the job training.
  • Stable, full‑time employment with an established precision machining company.
WORK SCHEDULE

Monday – Friday: 8:00 AM – 4:30 PM

Full-Time | 100% On-Site

High Tech Machine

6518 Wesco Way

Houston, TX 77041

Located in Northwest Houston near Eldridge and Emmett.

Walk-in Applications

Monday – Friday, 8:30 AM – 3:30 PM.

EQUAL OPPORTUNITY EMPLOYER

High Tech Machine is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other status protected by applicable law.

Obtém a tua avaliação gratuita e confidencial do currículo.

ou arrasta e larga o ficheiro aqui.

Similar jobs

Ofertas semelhantes que vale a pena comparar

Quality Control Manager
Quality Control Manager

High Tech Machine • Houston (TX)

Presencial
USD 85 000 - 110 000
Health Insurance
Dental Insurance
Vision Insurance
+5
Quality Control Coordinator
Quality Control Coordinator

High Tech Machine Co., LLC. • Houston (TX)

Presencial
USD 41 000 - 48 000
Medical/dental/vision insurance after
401(k) eligibility after 1 year
Paid time off after 1 year
+3
Manufacturing Application Technician
Manufacturing Application Technician

MMT • Angleton (TX)

Presencial
USD 48 000 - 75 000
401(k) retirement plan with employer  
Paid time off and paid parental leave
Tuition reimbursement and professional
+2
Manufacturing Application Technician
Manufacturing Application Technician

Medical Manufacturing Technologies • Angleton (TX)

Presencial
USD 55 000 - 75 000
401(k) retirement plan with employer m
Paid time off and paid parental leave
Tuition reimbursement and professional
+2
Manufacturing Application Technician
Manufacturing Application Technician

Medical Manufacturing Technologies • Angleton (TX)

Presencial
USD 42 000 - 65 000
401(k) match
Paid time off
Tuition reimbursement
+1
Quality Engineer
Quality Engineer

Treske Precision Machining Inc. • Sherwood (OR)

Híbrido
USD 85 000 - 110 000
Employer paid medical insurance
Family Health insurance
Paid life insurance
+2
Quality Control/Material Certification Specialist in Houston
Quality Control/Material Certification Specialist in Houston

Energy Jobline ZR • Houston (TX)

Presencial
USD 55 000 - 85 000
Training provided
CNC Machinist II
CNC Machinist II

Hackensack Meridian Health • Houston (TX)

Presencial
USD 45 000 - 60 000
Machine Operator
Machine Operator

Hmt Llc • Tomball (TX)

Híbrido
USD 26 000 - 30 000
CNC Machinist I
CNC Machinist I

Medical Manufacturing Technologies • Angleton (TX)

Presencial
USD 25 000 - 33 000
401(k) retirement plan with employer?
Paid time off
Tuition reimbursement
+2