Manufacturing Test Engineer – Robotics

Tutor Intelligence, Inc.

Massachusetts

On-site

USD 90,000 - 130,000

Full time

10 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Tutor Intelligence, Inc. in Watertown, MA is seeking a Manufacturing Test Engineer to design and own test systems for production robots ramping in early 2027. You will define test strategy, build fixtures, set pass/fail criteria, and analyze data to ensure every robot meets quality targets prior to shipment.

Responsibilities include developing test software, SPC-based monitoring, and root-cause investigation with CAN traces. Strong Python and electrical debugging skills are required.

Qualifications

  • BS in Electrical, Mechanical, Computer or Mechatronics Engineering.
  • 3+ years full-time in manufacturing or production test engineering for electromechanical products.
  • Designed test stations from scratch and can explain architecture, instruments and fixturing.
  • Set pass/fail limits using requirements, data, guard-banding and capability analysis.
  • Strong Python for test automation; LabVIEW/TestStand is a plus.
  • Experience with SPC: control charts, Cp/Cpk and gage R&R.

Responsibilities

  • Define test strategy across stages from incoming parts to end-of-line testing.
  • Design and build bench fixtures, HIL rigs and end-of-line testers with instrumentation.
  • Set and document pass/fail criteria with rationale and guard-bands.
  • Run gage R&R studies and calibrate intervals.
  • Write Python test sequences with results logged (ION) and build dashboards for yield analysis.
  • Troubleshoot failures to root cause with scope, meters and CAN traces.

Skills

Test strategy
Python for testing
Electrical debugging
Statistical process control
Gage R&R
CAN traces
LabVIEW
TestStand

Education

BS in Electrical/Mechanical/Computer/Mechatronics

Tools

LabVIEW
TestStand

Job description

About Tutor

We believe robots are the biggest lever we have to making the physical world a better, more affordable place. But robots are a rounding error in our society: nearly nine out of ten American factories and warehouses don’t even have a single robot, and robots have yet to make their way into our homes or places of business.

Tutor Intelligence is changing that.

Tutor is a robotics research and deployment company, building generally capable robot hardware and artificial intelligence to enable robots to go where no robots have gone before. Our robots range from a semi-humanoid with frontier dexterity approaching the human form to workhorses that do back-breaking work, moving boxes, pallets, and bulk goods for businesses from family-owned manufacturers to some of the largest brands in the world. Tutor robots are manufactured at scale and operate as a network, combining the whole fleet’s learned experience to train ever more capable robot artificial intelligence.

Founded at MIT and headquartered in Watertown, MA, our team is full stack: we design and manufacture robot hardware, train our own models, work directly with the smallest and largest end-customers, and maintain our fleet across the United States. We’re a team of researchers, engineers, technicians, operators, and sellers who love building things and solving hard problems.

Our mission is grand: robots everywhere, for the common good, raising the standard of living across North America, and then the world.

The Role
  • Tutor Intelligence is seeking a manufacturing test engineer to design, build and own the test systems that prove every robot we build works before it ships. Our next-generation robot moves into production in early 2027 and ramps to 18 robots a day. This mostly comes down to test strategy and test station design: deciding what gets tested where, building the fixtures and testers, setting pass/fail and control limits from real data, and running the numbers that show the line is healthy. When something fails, you find out whether it’s the part, the process or the test, and fix it.
What You'll Own
  • Test strategy: define what gets tested at each stage, from incoming parts to subassembly benches to end-of-line acceptance testing. Tie each test to a real failure mode, and know what each test can't catch.
  • Test environment design: design and build bench fixtures, hardware-in-the-loop rigs and end-of-line testers, including instruments, power, signal switching, safety interlocks and calibration.
  • Pass/fail criteria: set limits from engineering requirements and data, not guesses. Document the reasoning behind every limit, and add guard-bands where measurement uncertainty requires them.
  • Statistical process control: set control limits on key test parameters such as motor current, encoder error, torque, bus voltage, CAN error counts and cycle time. Use control charts to catch drift and shifts while units are still passing.
  • Measurement system analysis: run gage R&R studies on fixtures and instruments and set calibration intervals, so a fail means the robot failed and not the tester.
  • Test software and data: write Python test sequences with results logged to ION by serial number. Build dashboards for first-pass yield, failure-mode Paretos, Cpk and escapes.
  • Debug and root cause: take failing robots and subassemblies to a verified root cause with a scope, meter and CAN traces. Escalate design problems to Engineering with the data that proves them.
  • Closing the loop: turn line failures, field returns and MRB findings into new tests, tighter limits or process fixes. Retire tests that never catch anything.
What You'll Test
  • Actuators and motor drives: joint motors, servo drives, encoders, homing
  • Harnesses and power: continuity and hipot, power distribution, battery and BMS
  • Communications and controllers: CAN and EtherCAT, embedded controllers, firmware and configuration
  • Sensors and compute: cameras, calibration, Linux/ROS compute, provisioning
Who You'll Work With
  • Our production technicians and production supervisor, every day on the line
  • The Production Engineering lead you report to
  • Hardware and firmware engineers, who take your escalations
  • Quality and RMA, who bring you field returns
Your First Year
  • A written test strategy and coverage map for the robot, approved before the 2027 ramp
  • Bench tests live on critical subassemblies, with documented limits and completed gage studies
  • Every robot passes an automated acceptance test, with results traced to its serial number in ION
  • Control charts live on the key parameters, with first-pass yield and Cpk reported weekly
What You Bring
  • BS in Electrical, Mechanical, Computer or Mechatronics Engineering
  • 3+ years full-time in manufacturing or production test engineering for electromechanical products
  • You’ve designed test stations from a blank page, not just run or maintained existing ones. You can walk us through the architecture, the instruments and the fixturing.
  • You’ve set pass/fail limits and can explain how: requirements, characterization data, guard-banding and capability analysis
  • Hands‑on statistical process control: control charts, Cp/Cpk, and gage R&R or other measurement system analysis
  • Strong Python for test automation and data analysis; LabVIEW/TestStand is a plus
  • Strong electrical debug: schematics, scopes, meters, logic analyzers, CAN traces
  • You’ve taken a product from pilot builds into a production ramp and moved first-pass yield or test time with numbers
Backgrounds That Fit Well
  • Manufacturing test engineers from robotics and warehouse automation, EV and battery, AV and drones, medical devices, consumer electronics, or contract manufacturers that build electromechanical products.
This Role Is Not
  • Software QA, chip or wafer test, design-validation testing for design sign-off, or running someone else's test plan. If you haven't designed a tester and set its limits, this role will feel very different from what you've done.
Nice to Have
  • Six Sigma Green or Black Belt, or formal design‑of‑experiments work
  • Test data infrastructure: databases, MES (ION or similar), yield dashboards
  • Mobile robot or robot arm experience
  • Daily use of AI tools like Claude to build tools and analyze data
Why Tutor?

Whether you’re designing robots, closing deals, running deployments, or creating the processes that help us scale, your work doesn’t sit on a shelf. It shows up on real production floors, making physical work safer and more affordable.

Our team is driven by curiosity and a genuine love of building. Everyone here takes real ownership, learns fast, and holds a high bar while having each other’s backs. If you love hard problems and creating things that didn't exist before, you’ll fit right in.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Manufacturing Test Engineer – Robotics
Manufacturing Test Engineer – Robotics

Tutor • Watertown (MA)

On-site
USD 90,000 - 130,000
Lead Hardware Engineer – Production
Lead Hardware Engineer – Production

Tutor • Watertown (MA)

On-site
USD 140,000 - 190,000
Health insurance
401(k) plan
Generous PTO
+2
Robotics Test & Debug Engineer
Robotics Test & Debug Engineer

Tutorintelligence • Watertown (MA)

On-site
USD 90,000 - 120,000
Lead Robotics Manufacturing and Test Engineer
Lead Robotics Manufacturing and Test Engineer

tutorintelligence • Watertown (MA)

On-site
USD 140,000 - 190,000
Engineering Manager, Production Engineering
Engineering Manager, Production Engineering

Tutor Intelligence, Inc. • Massachusetts

On-site
USD 175,000 - 225,000
Health insurance
401(k)
Unlimited PTO
+1
Engineering Manager, Production Engineering
Engineering Manager, Production Engineering

ResumeXrays LLC • Massachusetts

On-site
USD 120,000 - 190,000
Fully employer-covered health 보험
401(k) plan
Generous paid time off
+1
Senior Robotics Test & Integration Technician (Technician III)
Senior Robotics Test & Integration Technician (Technician III)

Tutor Intelligence • Watertown (MA)

On-site
USD 52,000 - 66,000
Employer-covered health insurance
401(k) plan
In-office meals
+1
Engineering Manager, Production Engineering
Engineering Manager, Production Engineering

Tutor • Watertown (MA)

On-site
USD 150,000 - 190,000
Health insurance
401(k) plan
Unlimited PTO and holidays off
+1
Production Engineer - Manufacturing Process and ECO Implementation
Production Engineer - Manufacturing Process and ECO Implementation

Tutor Intelligence • Watertown (MA)

On-site
USD 100,000 - 150,000
Health insurance
401(k) plan
In-office meals
Lead Hardware Engineer – Production
Lead Hardware Engineer – Production

Tutor Intelligence, Inc. • Massachusetts

On-site
USD 140,000 - 180,000
Health insurance
401(k) plan
Unlimited PTO
+1