Manufacturing Engineer Technician - 1st Shift

Eaton Corporation

Glenolden (Delaware County)

On-site

USD 32,000 - 46,000

Full time

3 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Day-One Benefits
Paid Holidays
Retirement benefits
Paid Parental Leave
Educational Assistance
Wellness Reimbursement
Fruit & pretzels on site
Onsite events

Job summary

Eaton Corporation in Glenolden, PA, seeks a Manufacturing Engineer Technician on 1st shift to support electro-mechanical sensor production. You will create and maintain work instructions, assist with production issues, and troubleshoot failures to sustain output.

The role emphasizes lean manufacturing, continuous improvement, and cost-out initiatives. Schedule is 7:00 AM–3:30 PM with a $28.50 per hour rate and day-one benefits.

Qualifications

  • Associate degree or 2-year electronics-related certification required.
  • At least 3 years of manufacturing experience.
  • No immigration sponsorship available; CPT/OPT/STEM OPT not offered.
  • No relocation benefit; candidates within 50 miles considered.
  • Export-controlled information requires U.S. person status.
  • Ability to read and interpret technical drawings.

Responsibilities

  • Assist manufacturing engineers with process maintenance and documenting work instructions.
  • Provide technical guidance to group leaders and operators on assembly techniques.
  • Maintain routers and visual work instructions.
  • Investigate root causes of non-conformities and implement corrective actions.
  • Develop robust, cost-efficient manufacturing processes in line with lean principles.
  • Develop fixtures to reduce process variation and support continuous improvement.
  • Communicate with Planners, VSMs, and Quality Assurance.

Skills

Technical drawings
Technical writing
Machining tasks
Lean manufacturing
Root cause analysis
MS Office

Education

Associate Degree or 2-year electronics certification

Tools

Excel
Routers

Job description

Eaton’s IS AER FED division is currently seeking a Manufacturing Engineer Technician - 1st Shift to join our team in Glenolden, PA!

The core hours are 7 am - 3:30 pm, Monday - Friday.

The hourly rate for this position is $28.50 per hour.

Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.

Why Work at Eaton?
  • Day-One Benefits – Health insurance and vacation time start on your first day!
  • Up to 13 Paid Holidays – Enjoy time off, including a plant shutdown between Christmas and New Year’s.
  • Invest in Your Future – Retirement benefits, Paid Parental Leave, Educational Assistance, Wellness Reimbursement, and more.
  • Perks You’ll Love – Monthly fresh fruit and pretzels, plus fun onsite events hosted by our activity, wellness, and community involvement teams.

Join Eaton and enjoy great benefits, meaningful perks, and a workplace that supports your well-being from day one!

What you’ll do:

The Manufacturing Engineer Tech is responsible for supporting the production of electro-mechanical sensors. Primary functions include creating and maintaining work instructions, assisting production issues, and troubleshooting and diagnosing failures.

This position is responsible for supporting plant leadership in achieving business and financial goals by developing and maintaining robust manufacturing processes and participating in continuous improvement and cost out initiatives across the organization.

In this role, you will:

  • Assist the manufacturing engineers in all areas of responsibility with primary focus on process maintenance, non-conformance response, and documentation of work instructions.
  • Provide technical support and instruction for group leaders and operators on proper assembly techniques.
  • Maintain routers and visual work instructions.
  • Assist in the investigation of root cause for non-conformities and implementation of corrective action.
  • Assist in developing and maintaining robust, cost-efficient manufacturing processes and product structures consistent with lean manufacturing practices.
  • Develop and implement fixtures and practices to reduce process variation.
  • Promote culture of continuous improvement and understands lean manufacturing techniques as they apply to consistent with lean manufacturing practices.
  • Review non-conformities and make recommendations for rework and scrap.
  • Develop and document rework operations.
  • Maintain communication with Planners, VSMs, and Quality Assurance.
Qualifications:

Required (Basic) Qualifications:

  • Associate Degree or completion of a 2-year certification in electronic discipline or a related field from accredited institution
  • Minimum of 3 years of experience working in a manufacturing environment
  • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
  • No relocation benefit is offered for this position. Only candidates within a 50-mile radius of the work location will be considered. Active-Duty Military Service member candidates are exempt from the geographical area limitation.
  • This position requires access to export-controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must be a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (green card holder), (iii) refugee under 8 U.S.C. 1157, or (iv) asylee under 8 U.S.C. 1158.
Skills:
  • Ability to read and interpret technical drawings.
  • Ability to communicate technical information in writing to leadership.
  • Ability to perform basic machining and assembly tasks in accordance with technical drawings.
  • Knowledge of lean manufacturing techniques – i.e. value stream mapping, one piece flow, etc.
  • Understanding of problem-solving methodologies used in determining root cause and formulating corrective action(s) - i.e. thought maps, 8D, root cause analysis, Process Failure Mode Effect Analysis, Gage R & R, control charts, Pareto charts, etc.
  • Proficiency in MS Office Word, Excel.
  • This position is responsible for supporting production and solving issues while adhering to quality and design requirements. It is critical to understand that responsibility and limitations of authority.

All positions may require participation in video and in-person interviews as part of the hiring process. All candidates will be evaluated based on job-related competencies, and all candidates’ privacy rights and data security will be protected in accordance with applicable laws.

We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws.

You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.

To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number.

We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electronics Manufacturing Engineer Technician - 1st Shift
Electronics Manufacturing Engineer Technician - 1st Shift

Eaton Corporation • Glenolden

On-site
USD 36,000 - 52,000
Health insurance on day one
Paid holidays
Retirement benefits
+3
Manufacturing Engineering Technician - 1st shift
Manufacturing Engineering Technician - 1st shift

Eaton Corporation • South Milwaukee (WI)

On-site
USD 36,000 - 50,000
Health benefits
Vacation time
Weekly pay
+3
Technical Production Supervisor
Technical Production Supervisor

Eaton Group • Middlesex (NC)

On-site
USD 86,000 - 126,000
Relocation assistance
Health and retirement benefits
Manufacturing Engineer
Manufacturing Engineer

Eaton Group • Middlesex (NC)

On-site
USD 71,000 - 105,000
ME Tech - 1st Shift
ME Tech - 1st Shift

Eaton Corporation • Waukesha (WI)

On-site
USD 33,000 - 48,000
Manufacturing Engineer (2nd Shift)
Manufacturing Engineer (2nd Shift)

Eaton Corporation • Jackson (MI)

On-site
USD 71,000 - 105,000
Senior Support Technician I
Senior Support Technician I

Eaton Corporation • Town of Orchard Park (NY)

On-site
USD 60,000 - 80,000
Assembly Team Leader (1st Shift)
Assembly Team Leader (1st Shift)

Eaton Corporation • Williamsburg (VA)

On-site
USD 44,000 - 47,000
Health benefits
Vacation time
Paid holidays
+5
Manufacturing Engineer
Manufacturing Engineer

Eaton Corporation • Beaver

On-site
USD 71,000 - 105,000
Relocation assistance
Electro-Mechanical Technician - 1st Shift
Electro-Mechanical Technician - 1st Shift

Eaton Corporation • Bethel (CT)

On-site
USD 28,000 - 40,000