Manufacturing Engineer, CNC

Hadrian; Los Angeles (CA); On-site; USD 89,000 - 150,000; Full time

Benefits offered by this job

Medical, dental, vision

401(k)

Relocation support

Flexible vacation policy

Job summary

Hadrian is hiring a Manufacturing Engineer with deep CNC machining expertise to join our FX facility in Torrance, CA. You will join a team of engineers and SMEs and define machining processes from CAM strategy through first-part-off, turning tough titanium and Inconel parts into documented, validated production.

You'll be the machining voice in capital equipment decisions, supporting SMEs through capex selection, and partnering with the factory development team as new capability is installed and

Qualifications

• BS in Mechanical/Manufacturing Engineering or equivalent hands-on experience.
• Strong GD&T fundamentals and process validation.
• Experience in aerospace/defense or precision manufacturing preferred.

Responsibilities

• Lead CNC machining process development from CAM strategy to first-part-off.
• Qualify processes for production with Cp/Cpk, SPC, and DOE-driven optimization.
• Support capital equipment selection and FAT, defining requirements and runoff criteria.
• Assist factory development as new capabilities come online and ramp to production.
• Provide DFM feedback and drive cycle-time and cost-down improvements.

Skills

CNC machining

CAM programming

GD&T

5-axis milling

Data-driven methods

Education

BS in Mechanical/Manufacturing Engineering

Tools

hyperMILL

NX CAM

Mastercam

Job description

Hadrian - Manufacturing the Future

Hadrian is building autonomous factories to reindustrialize America. By combining AI, advanced software, robotics, and full-stack manufacturing, we help aerospace and defense companies build rockets, satellites, aircraft, ships, and other mission-critical systems up to 10x faster and at significantly lower cost.

Following our $1.37B Series D at a $7.87B valuation, Hadrian is rapidly expanding our manufacturing footprint, launching new capabilities across welding, casting, forging, electronics, additive manufacturing, and more, while scaling our Factory-as-a-Service platform to transform how critical products are built.

Backed by leading investors including JPMorgan Chase, Valor Equity Partners, Andreessen Horowitz, Founders Fund, 137 Ventures, Lux Capital, T. Rowe Price, and Morgan Stanley, we're building the future of American manufacturing and looking for exceptional people to help make it happen.

If you're ready to take on the most challenging and rewarding work of your career while helping create American manufacturing jobs for generations to come, you're exactly who we're looking for.

The Role

We're hiring a Manufacturing Engineer with deep CNC machining expertise to join our team at the FX facility in Torrance, CA. You'll join a group of roughly twenty engineers and SMEs specialized across manufacturing capabilities - sheet metal, tube & pipe, and more - and bring dedicated machining depth at a moment when it matters most: our machining capacity and process maturity are directly on the critical path for one of Hadrian's highest-priority programs. This is a process development and qualification role, not a machine operation role. You'll define machining processes from CAM strategy through first-part-off and drive them to capable, repeatable production - turning tough titanium and Inconel parts into documented, validated processes. You'll be the machining voice in capital equipment decisions, supporting SMEs through capex selection, and you'll partner with the factory development team as new capability is installed, commissioned, and brought online. It's a role for an engineer who combines hands-on machining judgment with data-driven rigor (DOE, SPC, capability studies) and wants their fingerprints on both the parts and the machines we buy - all in a fast-moving, high-mix, low-volume environment.

What You'll Do

• Lead CNC machining process development and research end to end - machining strategy, CAM/toolpath direction, cutting parameters, workholding and fixturing, and in-process probing - for complex, tight-tolerance aerospace and defense parts in a high-mix, low-volume environment (5-axis strongly preferred; mill-turn a plus), with a focus on steel, titanium and Inconel.
• Qualify processes to capable, repeatable production: first-article builds, process capability studies (Cp/Cpk), SPC, and DOE-driven parameter optimization.
• Serve as the CNC subject-matter expert supporting the capital equipment (capex) selection process - defining requirements and runoff criteria, evaluating machine tools, vendor assessment and capability studies, and factory acceptance testing (FAT).
• Support the factory development team as new machining capability comes online - providing machining expertise through equipment installation, commissioning, and machine bring-up from first-part-off to fully ramped and stabilized production.
• Provide Design for Machinability (DFM) feedback and tolerance definition to design and engineering teams, and drive cycle-time and cost-down improvements against aggressive program milestones.

What We're Looking For

• 4+ years of manufacturing engineering experience in CNC machining processes in aerospace & defense, precision manufacturing, medical device, or consumer electronics environments (a BS in Mechanical/Manufacturing Engineering is great; equivalent hands-on experience is just as valued).
• Deep multi-axis expertise: 3-5-axis simultaneous milling and turning/mill-turn, with CAM proficiency (e.g., hyperMILL, NX CAM, Mastercam) and the judgment to direct programming strategies and review toolpaths even when you're not the primary programmer.
• Hands-on experience machining titanium, Inconel, or other difficult-to-machine alloys — practical command of cutting tools and coatings, speeds and feeds, tool-life management, and thermal/distortion control.
• Strong fundamentals in GD&T (ASME Y14.5), workholding/fixture design, inspection, and process validation — with a demonstrated data-driven method (SPC, DOE, process capability analysis) behind yield and process-change decisions.
• Ability to operate autonomously in a fast-moving, high-mix environment: you own workstreams end to end, navigate ambiguity, and communicate clearly with machinists on the floor, engineers, and cross-functional stakeholders.

What Will Set You Apart

• Capital equipment qualification experience: machine runoffs, vendor bring-up, capability studies, and factory acceptance testing — including greenfield buildouts or overseas equipment qualification.
• Process development pedigree at scale — consumer electronics CNC (e.g., Apple MDE-style programs), space/propulsion machining, or medical device machining — with rigorous parameter and process documentation.
• Large-format machining and/or mill-turn programming and process development experience.
• Entrepreneurial ownership: machine-shop startup or buildout, 0-1 process launches, or products and businesses you built on your own initiative.
• Automation and data skills: macro programming (Heidenhain/Fanuc), in-process or automated metrology, tool-life/load monitoring, or production data analysis.

Compensation

For this role, the target salary range is $89,000 - $150,000 (actual range may vary based on experience).

This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting.

We may ultimately pay more or less than the posted range, and the range may be modified in the future.

An employee's pay position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs.

Benefits for Full-time Employees

• Medical, dental, vision, and life insurance plans for employees
• 401k
• Relocation support may be provided for certain situations, based on business need.
• Flexible vacation policy

ITAR Requirements

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

Use of AI in hiring

Hadrian uses AI-assisted tools in our recruiting and hiring processes to help our team work more efficiently. This may include tools that help organize and analyze recruiting data, as well as an AI-powered notetaker that can record and transcribe interviews and help coordinate feedback. These tools support our team and are not used to make hiring decisions. All candidate evaluations and hiring decisions are performed by humans. If an interview will be recorded, you will be notified in advance and may opt out at any time with no impact on your candidacy. Candidate data processed through these tools is subject to the same protections described in our Privacy Policy.

Hadrian Is An Equal Opportunity Employer

It is the Company's policy to provide equal employment opportunity for all applicants and employees. The Company does