Manufacturing Engineer

Birns Oceanographics Inc

Oxnard (CA)

On-site

USD 87,000 - 115,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

BIRNS, Inc. in Oxnard, CA is seeking a Manufacturing Engineer specializing in polyurethane molding. You will develop, optimize, and document molding processes, work closely with production teams, and drive quality and efficiency in a highly regulated environment.

The role requires hands-on engineering in a manufacturing setting, strong problem-solving, and experience with temperature-controlled molding, process control, and tooling. Competitive compensation and growth opportunities are offered.

Qualifications

  • Bachelor’s degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering or related technical discipline.
  • Minimum of 10 years of related manufacturing engineering experience.
  • Experience with temperature-controlled molding and curing of elastomeric materials (PUR, CR, or TPR).
  • Strong troubleshooting and problem-solving skills with root-cause analysis.
  • Experience developing manufacturing documentation, work instructions, and process specs.
  • Hands-on in manufacturing environment with cross-functional collaboration.
  • Ability to manage multiple priorities with attention to detail.

Responsibilities

  • Develop, implement, optimize, and validate polyurethane molding processes.
  • Troubleshoot molding and material-processing issues and implement corrective actions.
  • Establish and maintain robust repeatable processes meeting specs and quality.
  • Develop and maintain work instructions, SOPs, process specs, and standards.
  • Support tooling/mold design, fixtures, and process automation to improve capability.
  • Collaborate with Quality/Production to investigate nonconformances and reduce defects.
  • Apply Lean, 5S, SPC and continuous improvement methodologies.
  • Analyze performance to reduce scrap, rework, and manufacturing costs.
  • Ensure methods comply with quality, safety, and environmental controls.
  • Work cross-functionally to resolve issues and meet production objectives.

Skills

Manufacturing engineering
Polyurethane molding
Troubleshooting
Lean Manufacturing
SPC
5S
Documentation
Cross-functional teamwork

Education

Bachelor's degree in Manufacturing/Industrial/Mechanical Engineering or related

Tools

Mold tooling design
Process automation
MIL-M-24041 compliance

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Manufacturing Engineer

Oxnard, CA, US

2 days ago Requisition ID: 1038

Salary Range: $87,000.00 To $115,000.00 Annually

About BIRNS, Inc.

BIRNS is an AS9100-certified company and a recognized leader in the design and manufacture of high-performance underwater lighting and subsea interconnect systems. Our products support critical applications in the marine, military, and nuclear power generation industries, where quality, reliability, and performance are essential.

We are seeking an experienced, hands‑on Manufacturing Engineer specializing in Polyurethane Moldingto develop, optimize, document, and continuously improve our polyurethane molding and related manufacturing processes.

This is an excellent opportunity for a technically strong engineer who enjoys working directly with production teams, solving complex manufacturing challenges, improving process consistency, and driving high standards of quality and efficiency.

Position Summary

The Manufacturing Engineer will be responsible for developing, implementing, validating, and optimizing polyurethane molding processes to ensure safe, efficient, repeatable, and cost-effective manufacturing. The role will focus on process control, tooling, material processing, production documentation, troubleshooting, and continuous improvement.

Working closely with Engineering, Quality, Production, and Supply Chain, the Manufacturing Engineer will help ensure products meet stringent quality requirements while supporting on‑time delivery and operational excellence in a highly regulated manufacturing environment.

Key Responsibilities

  • Develop, implement, optimize, and validate polyurethane molding processes, including temperature‑controlled molding and curing operations.
  • Troubleshoot molding and material‑processing issues, identify root causes, and implement effective corrective and preventive actions.
  • Establish and maintain robust, repeatable manufacturing processes that meet product specifications and quality requirements.
  • Develop, document, and maintain detailed work instructions, standard operating procedures, process specifications, and manufacturing standards.
  • Support tooling and mold design, fixture development, and process automation initiatives to improve manufacturing capability and consistency.
  • Support potting, encapsulation, bonding, and other related manufacturing processes.
  • Collaborate with Quality and Production to investigate nonconformances, reduce defects, and improve process capability.
  • Apply Lean Manufacturing, 5S, Statistical Process Control (SPC), root cause analysis, and other continuous improvement methodologies.
  • Analyze manufacturing performance, identify opportunities to reduce scrap and rework, improve productivity, and control manufacturing costs.
  • Support process validation, documentation, operator training, and implementation of manufacturing process changes.
  • Ensure manufacturing methods comply with applicable quality system requirements, safety practices, and environmental controls.
  • Work cross‑functionally with Engineering, Quality, Production, and Supply Chain to resolve manufacturing issues and achieve production objectives.

Required Qualifications

  • Bachelor's degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Materials Engineering, or a related technical discipline from an accredited college or university, or an equivalent combination of education, technical training, and relevant experience.
  • Minimum of 10 years of related manufacturing engineering experience, or an equivalent combination of education and applicable experience.
  • Experience with temperature‑controlled molding and curing processes involving elastomeric materials such as polyurethane (PUR), chloroprene rubber (CR), and/or thermoplastic rubber (TPR).
  • Strong troubleshooting, analytical, and problem‑solving skills, including the ability to identify root causes and implement sustainable corrective actions.
  • Experience developing manufacturing documentation, work instructions, process specifications, and standardized production methods.
  • Ability to work hands‑on in a manufacturing environment and collaborate effectively with production personnel and cross‑functional teams.
  • Strong organizational skills and the ability to manage multiple priorities while maintaining a high level of attention to detail.

Preferred Qualifications

  • Direct experience with polyurethane molding processes, particularly two‑part polyurethane or elastomeric molding systems.
  • Experience with potting, encapsulation, and bonding processes utilizing MIL-M-24041 compounds.
  • Experience bonding to polyethylene (PE), TFE, and/or PTFE materials.
  • Familiarity with PRO-020 MLDG processes.
  • Demonstrated proficiency in Lean Manufacturing, 5S, Statistical Process Control (SPC), root cause analysis, and continuous improvement.
  • Experience with mold and tooling design, fixture development, and manufacturing automation support.
  • Experience developing process validation protocols, tooling specifications, and operator training materials.
  • Additional certifications or training in Six Sigma, Lean Manufacturing, process engineering, or related disciplines.

What Success Looks Like

The successful candidate will help BIRNS achieve:

  • Consistent, repeatable polyurethane molding processes.
  • Improved product quality and reduced defects, scrap, and rework.
  • More efficient manufacturing operations and improved process capability.
  • Clear, controlled, and standardized manufacturing documentation.
  • Effective collaboration between Engineering, Quality, and Production.
  • Continuous improvement in manufacturing performance, cost, and delivery.

Why Join BIRNS?

At BIRNS, you will contribute directly to the manufacturing of high-performance products used in demanding marine, military, and nuclear power generation applications. You will have the opportunity to apply your technical expertise, solve challenging process engineering problems, and make a meaningful impact on product quality, manufacturing efficiency, and operational performance.

Our work is guided by four core values: Focus on the Customer, Do the Right Thing, Treat People Right, and Continually Improve.

Compensation: $85,000–$100,000 annually, depending on qualifications and experience.

BIRNS, Inc. is an equal opportunity employer. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the position.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Manufacturing Engineer
Manufacturing Engineer

BIRNS, Inc. • Oxnard (CA)

On-site
USD 85,000 - 100,000
Senior Polyurethane Molding Manufacturing Engineer
Senior Polyurethane Molding Manufacturing Engineer

Birns Oceanographics Inc • Oxnard (CA)

On-site
USD 87,000 - 115,000
Senior Polyurethane Molding Engineer | Process Excellence
Senior Polyurethane Molding Engineer | Process Excellence

BIRNS, Inc. • Oxnard (CA)

On-site
USD 85,000 - 100,000
Manufacturing Engineer
Manufacturing Engineer

Polymer Concepts Technologies • Pennsylvania

On-site
USD 85,000 - 125,000
Manufacturing Technician
Manufacturing Technician

BIRNS, Inc. • Oxnard (CA)

On-site
USD 25,000 - 36,000
Sr. Manufacturing Engineer
Sr. Manufacturing Engineer

Polymer Concepts Technologies • Pennsylvania

On-site
USD 100,000 - 150,000
Manufacturing Engineer
Manufacturing Engineer

Randstad • Longmont (CO)

On-site
USD 120,000 - 135,000
Employee Stock Ownership
Competitive benefits
NPI Manufacturing Engineer III
NPI Manufacturing Engineer III

Kaman Corporation • Long Beach (CA)

On-site
USD 102,000 - 123,000
Medical insurance
Dental insurance
Vision insurance
+3
Manufacturing Engineer I
Manufacturing Engineer I

Polymer Concepts Technologies, Inc • Hanover

On-site
USD 65,000 - 85,000
401k plan with company match
Medical, dental, vision benefits
PTO
+1
Manufacturing Engineer III
Manufacturing Engineer III

Polymer Concepts Technologies, Inc • Hanover

On-site
USD 90,000 - 120,000
Safe Harbor 401k with company match
Medical, dental, vision benefits
PTO
+3