Manufacturing Engineer

Powerex-Iwata Air Technology Inc.

Harrison (OH)

On-site

USD 70,000 - 100,000

Full time

3 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Powerex-Iwata Air Technology Inc. in Ohio is seeking a Manufacturing Engineer to drive process design and continuous improvement across our make-to-order operations, supporting fabrication of air compressors, vacuum systems, and medical gas pipeline equipment.

You will translate new product designs into repeatable, efficient production processes, partner with Plant Manager, Production Supervisors, Quality, and Engineering to improve throughput, quality, and cost in a low-volume, high-mix

Qualifications

  • Bachelor's degree in Manufacturing, Mechanical, or Industrial Engineering.
  • 2-5+ years of manufacturing/process engineering experience, ideally in make-to-order or low-volume, high-mix capital equipment. Entry-level applicants with relevant co-op experience will be considered as well.
  • Working knowledge of ERP/MRP systems for routings, BOMs, and time standards; Infor CSI experience a plus but not required.
  • Practical experience with lean manufacturing, root-cause problem solving, and process development and documentation
  • Comfortable working directly on the shop floor alongside assemblers and technicians, not just at a desk
  • Experience in regulated or highly technical manufacturing environments (medical, industrial equipment) preferred

Responsibilities

  • Design, document, and improve manufacturing processes, work instructions, and routers for fabrication, assembly, and test operations
  • Develop and maintain accurate router-hour / earned-hour standards to support capacity planning and scheduling
  • Design and specify tooling, fixtures, and workstation layouts to improve safety, quality, and efficiency
  • Lead root-cause analysis and corrective action for recurring quality, process, or throughput issues
  • Partner with Engineering on design-for-manufacturability reviews for new and revised products.
  • Translate engineering drawings and BOMs into production-ready routings, work instructions, and time standards
  • Support first-article builds, pilot runs, and production ramp-up for new equipment configurations
  • Lead lean / continuous improvement projects to reduce waste, cycle time, and cost per unit
  • Identify and implement process automation, poka-yoke, and error-proofing opportunities on the shop floor
  • Track and report process performance metrics (cycle time, scrap/rework, on-time completion) to the Plant Manager
  • Maintain accurate routings, BOMs, and standard times within the ERP/MRP system (Infor CSI)
  • Support scheduling and data accuracy through disciplined router and time-standard maintenance
  • Partner with Engineering, Supervisors, and Team Leads on plant-wide diagnostics and equipment/process troubleshooting
  • Ensure processes meet applicable quality and regulatory requirements (e.g., NFPA 99, ISO9001, ASME)
  • Design processes and workstations with safety and ergonomics as a primary consideration

Skills

Lean manufacturing
Root-cause analysis
Process documentation
Shop-floor collaboration
Regulated environments

Education

Bachelor's degree in Manufacturing, Mechanical, or Industrial Engineering

Tools

Infor CSI
ERP/MRP systems

Job description

Powerex-Iwata Air Technology Inc. As a part of the global industrial organization Marmon Holdings—which is backed by Berkshire Hathaway—you’ll be doing things that matter, leading at every level, and winning a better way. We’re committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone’s empowered to be their best. The Manufacturing Engineer drives process design and continuous improvement across Powerex's make-to-order manufacturing operations, supporting fabrication and assembly of air compressors, vacuum systems, and medical gas pipeline equipment. This role bridges engineering and the shop floor, translating new product designs into repeatable, efficient production processes, and partnering with the Plant Manager, Production Supervisors, Quality, and Engineering to improve throughput, quality, and cost in a low-volume, high-mix environment. Come join Powerex, an industry leading provider of oil free compressed air and vacuum technology, where engineering excellence, innovation, and customer impact drive everything we do.

WHO WE ARE!

Powerex designs and builds oil free compressed air and vacuum systems used in environments where performance matters most, from hospitals and laboratories to transit systems, and advanced manufacturing operations. For more than three decades, our teams of engineers, technicians, and manufacturing professionals have partnered with customers to solve complex technical challenges and deliver highly reliable, application driven solutions. As part of Marmon and Berkshire Hathaway, Powerex offers the stability of a well-capitalized organization combined with the agility of a growing business. Employees have the opportunity to take ownership of meaningful projects, develop technical expertise, and build long term careers while contributing to systems that support critical infrastructure across multiple industries.

Process & Methods Engineering
  • Design, document, and improve manufacturing processes, work instructions, and routers for fabrication, assembly, and test operations
  • Develop and maintain accurate router-hour / earned-hour standards to support capacity planning and scheduling
  • Design and specify tooling, fixtures, and workstation layouts to improve safety, quality, and efficiency
  • Lead root-cause analysis and corrective action for recurring quality, process, or throughput issues
New Product Introduction & Design Support
  • Partner with Engineering on design-for-manufacturability reviews for new and revised products.
  • Translate engineering drawings and BOMs into production-ready routings, work instructions, and time standards
  • Support first-article builds, pilot runs, and production ramp-up for new equipment configurations
Continuous Improvement
  • Lead lean / continuous improvement projects to reduce waste, cycle time, and cost per unit
  • Identify and implement process automation, poka-yoke, and error-proofing opportunities on the shop floor
  • Track and report process performance metrics (cycle time, scrap/rework, on-time completion) to the Plant Manager
Systems & Data
  • Maintain accurate routings, BOMs, and standard times within the ERP/MRP system (Infor CSI)
  • Support scheduling and data accuracy through disciplined router and time-standard maintenance
  • Partner with Engineering, Supervisors, and Team Leads on plant-wide diagnostics and equipment/process troubleshooting
Quality & Safety
  • Ensure processes meet applicable quality and regulatory requirements (e.g., NFPA 99, ISO9001, ASME)
  • Design processes and workstations with safety and ergonomics as a primary consideration
Qualifications
  • Bachelor's degree in Manufacturing, Mechanical, or Industrial Engineering.
  • 2-5+ years of manufacturing/process engineering experience, ideally in make-to-order or low-volume, high-mix capital equipment. Entry-level applicants with relevant co-op experience will be considered as well.
  • Working knowledge of ERP/MRP systems for routings, BOMs, and time standards; Infor CSI experience a plus but not required.
  • Practical experience with lean manufacturing, root-cause problem solving, and process development and documentation
  • Comfortable working directly on the shop floor alongside assemblers and technicians, not just at a desk
  • Experience in regulated or highly technical manufacturing environments (medical, industrial equipment) preferred

Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law.

We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class.

If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to careers@marmon.com, and please be sure to include the title and the location of the position for which you are applying.

Welcome to the biggest small business you’ll ever find. Part of Berkshire Hathaway, Marmon is a global industrial organization made of 11 industry groups with 30K employees and $12 billion in annual revenue. As leaders in their respective industries, our 120+ companies thrive on an independent mindset and entrepreneurial spirit. At the same time, they benefit from being part of our industry groups—where they’re able to tap into the expertise and insights of other Marmon companies. While we’re all unique, we all share a common commitment to doing things that matter, leading at every level, and winning a better way. When you work at Marmon, you're advancing our everyday world and beyond. Our engineering solutions help millions around the world stay connected, healthy, and safe. Wherever you're at in your career, our people and resources will help you go further. As you grow your skills, you can also move up and around our 120+ companies. Work at a place you can stand behind. We show up to win every day, uphold the highest ethical standards, and always look to put each other in the best position to win.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Production Supervisor
Production Supervisor

Powerex-Iwata Air Technology Inc. • Harrison (OH)

On-site
USD 60,000 - 90,000
Manufacturing Engineer
Manufacturing Engineer

Powerex • Harrison (OH)

On-site
USD 70,000 - 100,000
A Assembler
A Assembler

Marmon Holdings, Inc. • Harrison (OH)

On-site
USD 19,000 - 30,000
IT Specialist
IT Specialist

Marmon Holdings, Inc. • Tennessee

On-site
USD 55,000 - 75,000
Operations Manager
Operations Manager

Marmon • Harrison (OH)

Hybrid
USD 70,000 - 100,000
Production Supervisor
Production Supervisor

Powerex • Harrison (OH)

On-site
USD 60,000 - 90,000
Manufacturing Engineer
Manufacturing Engineer

Marmon Holdings, Inc. • Newark (DE)

On-site
USD 85,000 - 110,000
PROCESS ENGINEER INTERN
PROCESS ENGINEER INTERN

Marmon Holdings, Inc. • South Goldsboro (NC)

On-site
USD 21,000 - 30,000
Operations Manager
Operations Manager

Powerex • Harrison (OH)

On-site
USD 60,000 - 85,000
Material Coordinator
Material Coordinator

Marmon Holdings, Inc. • Mount Juliet (TN)

On-site
USD 42,000 - 52,000