Manual Machinist (Part Time)

Horner Industrial Group; Cincinnati (OH); Hybrid; USD 25,000 - 41,000; Full time

Job summary

Horner Industrial Group in Cincinnati is seeking a Manual Machinist to safely operate various machine tools, read drawings, and produce replacement parts per specifications. You will use micrometers, calipers and other gauges, recording data to ensure first-pass accuracy on mechanical assemblies.

The role requires precise measurement, adherence to safety protocols, and the ability to work with little supervision as well as with team members across shop and customer sites.

Qualifications

• High School Diploma or the Equivalent. A Certificate or Associates Degree in an electrical / mechanical related field preferred; or three to six months related experience and/or training; or equivalent combination of education and experience.
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
• Ability to understand and carry out detailed written or oral instructions.
• Ability to problem solve in non-standardized situations.
• Ability to work independently and as part of a team
• Ability to relate and interact with associates at all levels
• Ability to become knowledgeable of all facets of the company, including technical aspects
• Must demonstrate basic verbal, written and interpersonal communication skills
• Must be able to maintain a high sense of urgency to meet project deadlines
• Must be able to perform essential functions of job, with or without reasonable accommodations.

Responsibilities

• Operate vertical and horizontal lathes.
• Operate milling machines.
• Operate drill presses.
• Operate surface grinders / sanders.
• Operate hydraulic presses.
• Operate metal spray torches.
• Operate broaching machines.
• Operate welders including MIG, TIG, ARC/Stick, Oxy Acety.
• Operate Chop Saws / Band saws
• Operate Dynamic Balancing Equipment.
• Read blue prints and/or draft drawings & specifications
• Accurately use measuring devices such as outside micrometers, calipers, inside micrometers, bore gauges, feeler gauges, rules, etc. to read and record sizes of equipment and component parts.
• Calibrates devices per approved standards, if self calibration is required.
• Accurately calculate tolerances and fits based upon measurements made.
• Documents all calculations & measurements on applicable forms.
• Turn shafts or bulk stock.
• Mill key ways.
• Turn and cut threads.
• Bore cylinders.
• Metal spray of bearing fit areas.
• Welding cast iron, various grades of steel, aluminum, copper, brass.
• Use hydraulic press to remove items from housings, etc.
• Drilling, grinding, sanding, etc.
• Dynamic balancing of rotational equipment
• Operate appropriate equipment safely and competently to perform job,
• Other duties as assigned and/or required to support the company’s goals and objectives

Skills

Blueprint reading

Milling & turning

Math proficiency

Detail oriented

Team collaboration

Safety compliance

Education

High School Diploma or equivalent

Certificate/Associates in electrical/mechanical field

Job description

JOB DESCRIPTION

Position Title: Manual Machinist Job Code: HRJD - 003Department: Machining Services FLSA Status: Hourly / Non-exemptSupervisor: Shop SupervisorDay Shift: 7am to 3:30 pmOT and Weekends as Needed

GENERAL SUMARY:

Primary duties include, but are not limited to; safely operating various machining tools such as lathes, mills, presses, grinders, saws, drills, boring tools, welders, broaches and metal spray units to repair existing or create replacement parts for mechanical assemblies or to fabricate new parts from drawings and/or specifications. Use measuring devices such as micrometers, calipers and bearing bore gauges along with proper techniques to determine correct sizing. Record all data necessary to produce expected service and/or design results. May require work both in shop and at various customer locations with overtime as needed.

JOB FUNCTIONS:

• Accurately operate various machining equipment that may include but not be limited to:
• Vertical and horizontal lathes.
• Milling machines.
• Drill presses.
• Surface grinders / sanders.
• Hydraulic presses.
• Metal spray torches.
• Broaching machines.
• Welders including MIG, TIG, ARC/Stick, Oxy Acety.
• Chop Saws / Band saws
• Dynamic Balancing Equipment.
• Reads blue prints and/or draft drawings & specifications
• Accurately uses measuring devices such as outside micrometers, calipers, inside micrometers, bore gauges, feeler gauges, rules, etc. to read and record sizes of equipment and component parts.
• Calibrates devices per approved standards, if self calibration is required.
• Accurately calculate tolerances and fits based upon measurements made.
• Documents all calculations & measurements on applicable forms.

• Perform assigned machining tasks that may include but not be limited to:
• Turning shaft or bulk stock.
• Milling key ways.
• Turning and cutting threads.
• Boring cylinders.
• Metal Spray of bearing fit areas.
• Welding cast iron, various grades of steel, aluminum, copper, brass.
• Using hydraulic press to remove items from housings, etc.
• Drilling, grinding, sanding, etc.
• Dynamic balancing of rotational equipment

• Operate appropriate equipment safely and competently to perform job,
• Other duties as assigned and/or required to support the company’s goals and objectives

QUALIFICATIONS:

• High School Diploma or the Equivalent. A Certificate or Associates Degree in an electrical / mechanical related field preferred; or three to six months related experience and/or training; or equivalent combination of education and experience.
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
• Ability to understand and carry out detailed written or oral instructions.
• Ability to problem solve in non-standardized situations.
• Ability to work independently and as part of a team
• Ability to relate and interact with associates at all levels
• Ability to become knowledgeable of all facets of the company, including technical aspects

• Must demonstrate basic verbal, written and interpersonal communication skills

• Must be able to maintain a high sense of urgency to meet project deadlines

• Must be able to perform essential functions of job, with or without reasonable accommodations.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.Employee is required to: sit, stand, talk, see, and hear.

In Terms Of an 8 hour workday,

On the job employees must:

• Stand: X
• Bend/Stoop/Kneel/Climb: X
• Reach above shoulder level: X
• Balance: X
• Push/Pull: X
• Use hands/fingers to handle/feel: X
• Repetitive operations: X

During work the employee must lift and/or push/pull:

On the job employees must lift:

• Up to 25 pounds: X
• Up to 50 pounds: X
• Up to 75 pounds: X

This position works near moving mechanical parts

This position has special vision requirements:

• Color vision – ability to identify and distinguish colors.
• Close vision – clear vision at 20 inches or less.
• Distance vision – clear vision at 20 feet or more.
• Peripheral vision – ability to observe an area that can be seen up and down and/or left and right while eyes are fixed on a given point.
• Ability to adjust focus – adjust the eye to bring an object into sharp focus.

The noise level that is typical for the work environment of this position is Moderate to High noise (examples: industrial production)