MAINTENANCE WORKER

Navy Exchange Service Command; Norfolk (VA); On-site; USD 28,000 - 37,000; Full time

Job summary

Navy Exchange Service Command is seeking a Maintenance Worker to perform a wide range of maintenance tasks across HVAC, electrical, plumbing, carpentry, masonry, and painting. The role supports Navy Exchange sites, performing routine repairs, troubleshooting, and preventative maintenance.

The candidate will handle refrigeration and air conditioning systems, electrical wiring and fixtures, plumbing fixtures, and painting projects.

Qualifications

• General maintenance experience across multiple trades including HVAC, electrical, plumbing, carpentry, masonry and painting.
• Specialized experience in maintaining and repairing refrigeration and air conditioning units and systems.
• Ability to perform physical labor and operate safely in varied environments.

Responsibilities

• Installs, maintains, and repairs refrigeration and air conditioning units and systems (coolers, freezers, etc.).
• Performs electrical repairs: wiring, controls, fixtures, and circuit breakers; replaces components as needed.
• Repairs plumbing and water heating equipment, installs fixtures, and ensures proper operation of systems.
• Plans and executes maintenance and minor construction tasks using drawings and blueprints; selects materials and installs components.
• Paints interior and exterior surfaces, prepares surfaces, and ensures quality finish; maintains tools and storeroom areas.

Skills

Air conditioning & refrigeration

Electrical work

Plumbing

Carpentry

Masonry

Painting

Job description

Job Description - MAINTENANCE WORKER (260003SF)

Job Description

MAINTENANCE WORKER

Job Number

260003SF

Organization

NEXCOMHQ Pay Range : $23.65

Job Summary:

Performs a variety of maintenance work requiring the use of a variety of trade practices associated with such occupations as air conditioning and refrigeration, electrical work, plumbing, carpentry, masonry, and painting.

Duties and Responsibilities:

Performs maintenance and repair work involving several trade skills when performing a substantial variety of the following examples of work:

• Installs maintains and repairs a variety of refrigeration and air conditioning units and systems such as coolers, refrigeration, deep freezers, etc. Traces and locates defects and makes visual, audible, and mechanical checks to determine the extent of repairs needed. Replaces a major portion of the various cooling units, such as compressors, condensers, expansion valves, thermostats, and drive assembles, tightens, loose connections, makes splices, insulates exposed wires in power sources, cleans and lubricates moving parts, replaces items such as belts, fans, and fuses. Upon completion of repair tests for proper operation.
• Makes electrical repairs on such items as defective wiring, controls, equipment, and fixtures having broken or bare wiring, burned out switches and relays, loose connections and fittings, damaged light fixtures, poorly operating thermostats. Rearranges and hooks up items such as outlets switches light fixtures regulators and circuit breakers to installed systems. Locates broken, worn, damaged or poorly operating wiring, fixtures, controls, and equipment, through visual check or use of a limited number of test equipment such as lamps and ammeters. Removes, replaces, tightens, splices, solders, and/or insulates the items being repaired using a variety of hand tools. Measures, cuts, and bends wires and conduits to specified lengths and angles.
• Removes, cleans, replaces, and seals defective parts of utility supply and disposal systems such as dirty traps, sections of broken tile, pipe, and tile caulks, and seals elbows, union joints, and faucets, cleans and reinstalls joints and fixtures. Hooks up water heaters, disposal units, faucets, and similar type equipment to installed systems. Uses material specified in work orders or obtains replacement parts by comparison with samples. Measures, cuts, and bends pipe according to measurements specified in orders or sketches or by comparison with samples. Uses such tools and equipment as tapes, rules, hacksaws, hand and power pipe threaders and cutters, packing and caulking irons, and pipe wrenches.
• Plans and lays out work in accordance with drawings, sketches, blue-prints, and own knowledge of construction or needed repairs. Selects lumber, materials, and supplies. Measures and cuts materials to the required lengths and dimensions. Installs structural and trim items by nailing, bolting, morticing, doweling, and gluing. Planes, sands, and finishes completed work when necessary. Installs sheet, roll, and shingle roofing, insuring proper alignment, and overlap. Fabricates and installs frames for windows, doors, transoms and ventilators, shelves, counters, plywood, duct work, bulletin boards, cabinets, bookcases, and related features having built in characteristics. Insures that installed components are level and accurately aligned with other parts of the structure. Installs floor and window sashes. Trims mortices, drills, and prepares items for attachment of hardware. Applies caulking compound or other filler material around door and window casing and at points where tight seal is required. Uses a variety of hand and power shop tools in the accomplishment of assignment.
• Performs maintenance repair or construction of a variety of structures and surfaces of brick, block, stone, and other related materials. May remove damaged portions of walls, partitions, walkways, or other similar structures in preparation of repairs. Tears out portions of walls for the installation of doors or windows. Spreads mortar, sets brick, block, and stone, and finishes mortar joints so that the repaired portion matches the undamaged portion of the structure. Uses a variety of hand tools such as trowels, gauge lines, plumb bobs, air hammers, and chisels in the performance of the above duties.
• Performs maintenance, repair, or construction of a variety of structures and surfaces of brick, block, stone, and other related materials. May remove damaged portions of walls partitions walkways or other similar structures. Spreads mortar, sets brick, block, and stone, finishes mortar joints. Uses a variety of hand tools such as trowels, gauge lines, plumb bobs, air hammers, chisels, etc.
• Paints a variety of surfaces, interiors and exteriors of buildings, shelves, counter, cabinets, and similar items at Navy Exchange sites and locations according to directions, ensuring surfaces are fully coated, protected, and free from drips and runs. Prepares surfaces by methods such as sanding, wire brushing, scraping, spackling, and puttying, brushes out, rolls, shellacs, applying prime intermediate and final coats, and assuring coating finishes meet surface protection requirements. Uses pre-mixed paints and prepared solvents, thinner, and stirs coating materials in accomplishment of painting assignments. Checks surfaces after painting to assure there are no skips, touches up as needed. Cleans and maintains brushes and painting equipment.
• May make automotive repairs that can be accomplished by cleaning, reinstalling, or replacing defective parts of components and systems, such as fouled spark plugs, leaky wheel cylinders, corroded mufflers, and worn brake shoes. Determines if parts should be cleaned and reinstalled or replaced with standard parts. As necessary, removes and replaces with standard parts such as wheel cylinders, fuel lines, condensers, mufflers, tailpipes, brake linings, master cylinders, etc. Makes, as required, settings and adjustments such as setting distributor and voltage regulator, points gapping spark plugs, setting engine idle and time, and taking up on brakes. Uses a variety of common hand tools such as wrenches, pliers, brake tools, ignition tools, and screwdrivers in the accomplishment of the above. Locates worn, dirty, or poorly adjusted parts through visual check or uses a variety of test equipment such as timing lights, dwell meters, feeler gauges, circuit testers, and similar type of test equipment.
• Maintains storeroom areas in a clean and orderly manner.

Performs other related duties as assigned.

PHYSICAL EFFORT - Is required to stand, stoop, bend, kneel, climb, and work in tiring and uncomfortable positions. Frequently lifts, carries, and sets up materials and equipment weighing up to 50 pounds in the performance of duties.

WORKING CONDITIONS - Work is performed inside and outside. Inside work is usually in building adequately heated, lighted, and ventilated. Noises from hammers, saws, and other power tools are frequent. Is exposed to dust, dirt, fumes, and spray when repairing, painting, and operating power tools, etc. Injuries may occur when lifting heavy pieces of lumber or equipment, cuts and bruises in using hand tools and equipment, more serious injuries in falls from ladders and scaffolds

GENERAL EXPERIENCE - One year of experience that provided the applicant with knowledge of general maintenance practices involving the upkeep of buildings, grounds, fixtures, equipment, etc.

SUBSTITUTION OF EDUCATION FOR EXPERIENCE - One year of high school education may be substituted for 3 months of general experience up to a High School Diploma or GED for one year of general experience.

SPECIALIZED EXPERIENCE - Three years of general maintenance work in involving variety of trade practices associated with such occupations as air conditioning and refrigeration, electrical work, plumbing, carpentry, masonry, and painting, etc.

PHYSICAL REQUIREMENTS - Standing, stooping, bending, kneeling, climbing, and work in tiring and uncomfortable positions. Frequently lifts and carries material weighing up to 50 pounds.