Maintenance Technician- 2nd Shift $37.74/hour

Barksdale Control Products

United States

On-site

USD 43,000 - 61,000

Full time

11 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Health insurance
Dental insurance
Vision insurance
Life insurance
Disability insurance
Education reimbursement

Job summary

Crane Aerospace & Electronics in Elyria, Ohio is seeking a Mechanical Maintenance Technician to support NC/CNC and related automation systems on the 2nd shift. The role requires broad electro-mechanical knowledge and the ability to read schematics and use diagnostic tools.

You will perform skilled maintenance, safety checks, and documentation, working with internal/external customers while pursuing continuous improvement. A high school diploma and a lift-truck certification are required.

Qualifications

  • Education: High School Diploma.
  • Experience in maintenance and service across multiple trades.
  • Must have completed Maintenance Trainee (internal applicants).
  • Knowledge of 480/240 Volt/3 phase systems and PLC basics.
  • Reading and interpreting schematics and blueprints.
  • Certified lift truck operator.

Responsibilities

  • Perform maintenance across carpentry, electrical, millwright, plumbing, welding and painting.
  • Repair and maintain complex electro-mechanical equipment and NC/CNC tools.
  • Test circuits with oscilloscopes and voltmeters; use schematics and drawings.
  • Follow safety checks and document all work performed.
  • Collaborate with internal/external customers and welcome continuous improvement.

Skills

3-phase electrical systems
PLC knowledge
NEC codes
Conduit bending
Motor & controls
Hydraulics & pneumatics
Troubleshooting
Lockout/tagout
Reading/writing skills

Education

High School Diploma
Maintenance Trainee program
Certified lift truck operator

Tools

Oscilloscope
Voltmeter

Job description

Crane Aerospace and Electronics has an exciting opportunity fora C NC Machinist- 2nd Shift at our Elyria OH location.

Hours are 3:00pm-11:30pm.

Hourly Pay: $37.74

About Crane:

Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You’ll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS).

Our Crane Aerospace & Electronics Elyria facility has been a bedrock in the community-friendly town of Elyria, Ohio, for more than a century. Known for our excellence in pumping technology, our Elyria site produced the first-ever positive displacement pump for high performance piston engine aircraft and even supplied pumps for Charles Lindbergh in the 1930s. We have more than 150,000 fuel and lubrication pumps in service today and are proud to offer custom thermal management system solutions for a range of next-gen applications. Start the next chapter of your career with Crane Aerospace & Electronics!

Job Summary:

The Mechanical Maintenance Technician performs repair and maintenance work on electronic control equipment and apparatus as associated with automated machine tools, such as NC/CNC and all other state of the art related type of equipment, servo-mechanism, etc., of complex and involved design requiring broad technical knowledge of electro-mechanical principles and equipment design plus specialized skills and techniques.

Essential Functions:
  • Perform all factory maintenance and service work including carpenter, electrician, millwright, plumbing, tool welding, and painting.
  • Perform repair and maintenance work on various machines, tools, and equipment of complex design requiring broad technical knowledge of electro- mechanical principles and equipment design plus specialized skills and techniques.
  • Use special testing instruments such as oscilloscopes, voltmeter, and electronic equipment to test circuitry and components.
  • Work from complicated schematic diagrams, drawings and specifications involving complex circuitry together with machine design drawings.
  • Attend schools conducted by equipment manufactures to learn specific equipment repair procedures when required.
  • Perform maintenance helper tasks as necessary without the use of temporary transfers.
  • Keep charts and records as required on completed sequences and processes.
  • Perform appropriate safety checks in the cell.
  • Complete all required paperwork/documentation.
  • Work with internal and external customers and suppliers and participate in continuous improvement activities as required.
  • Perform other duties as assigned by department supervisor.
  • Utilize computer to access various databases.
Minimum Qualifications:
  • Education: High School Diploma
  • Experience: Previous Maintenance and service work experience including carpenter, electrician, millwright, plumbing, tool welding, and painting;
  • Must have successfully completed Maintenance Trainee occupation (internal applicants only).
  • Skills/Abilities: Have knowledge of 480/240 Volt/3 phase systems, along with at least a basic understanding of PLC’s, NEC codes, conduit bending, motor and controls, hydraulic and pneumatics, troubleshooting methods and lock out tag out rules.
  • Must have basic reading and writing skills
  • Requires basic math skills to make necessary calculations such as adding, subtracting, multiplying, and dividing;
  • Must be able to read and interpret schematic designs, blueprints, detail sheets, manufacturing outlines, and written instructions.
  • Must have successfully completed Maintenance Trainee occupation (internal applicants only).
  • Certifications, Licenses, and Registrations: Must be a certified lift truck operator.
  • Eligibility Requirement: This position may require access to Controlled Data or Information. Where the position requires such access only US Persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR).
Working Conditions:
  • Physical Demands: Must be able to climb ladders up to25feet
  • Must be able to work at elevated heights up to25 feet
  • Must be able to lift and move heavy objects and equipment, material handling devices can be used for heavier objects.
  • Work Environment: Manufacturing shop floor environment
  • Greasy, oil environment
  • Occasional solvent vapors and dust
  • May be required to occasionally wear half face piece respirator
Top Benefits:
  • Benefits: Health care, dental, vision, life and disability insurance startingthe first day of the month
  • Education Reimbursement: eligible after 6 months of employment

You can see a list of our benefits at https://www.craneae.com/company/careers or visit our website at www.CraneAE.com for more information on our company and greatopportunities.

We are committed to operational excellence and world class processes. We employ Lean manufacturing techniquesto optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value.

In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool.

Hourly range: $37.74 . Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications.

This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.

Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Maintenance Technician- 2nd Shift $37.74/hour
Maintenance Technician- 2nd Shift $37.74/hour

211 Hydro-Aire Aerospace Corp. • Elyria (OH)

On-site
USD 43,000 - 61,000
Health insurance
Education reimbursement
Maintenance Technician- 2nd Shift $37.74/hour
Maintenance Technician- 2nd Shift $37.74/hour

Crane Aerospace & Electronics, Inc. • Elyria (OH)

On-site
USD 44,000 - 59,000
Health care
Dental, vision, life and disability
Education reimbursement
CNC Bearing Machinist- 2nd Shift- $38.85 Plus $1,000 Sign-on Bonus
CNC Bearing Machinist- 2nd Shift- $38.85 Plus $1,000 Sign-on Bonus

Crane Co. • Elyria (OH)

On-site
USD 44,000 - 63,000
Health care, dental, vision, life and 
Education reimbursement
CNC Bearing Machinist- 2nd Shift- $38.85
CNC Bearing Machinist- 2nd Shift- $38.85

211 Hydro-Aire Aerospace Corp. • Elyria (OH)

On-site
USD 44,000 - 63,000
Health & dental insurance start day 1
Vision insurance
Life and disability insurance
+1
Assembler- $33.91
Assembler- $33.91

Barksdale Control Products • United States

On-site
USD 39,000 - 55,000
Health insurance
Dental insurance
Life insurance
+1
CNC Bearing Machinist- 2nd Shift- $38.85 Plus $1,000 Sign-on Bonus
CNC Bearing Machinist- 2nd Shift- $38.85 Plus $1,000 Sign-on Bonus

Crane Aerospace & Electronics, Inc. • Elyria (OH)

On-site
USD 50,000 - 58,000
Health insurance
Dental insurance
Vision insurance
+1
CNC Bearing Machinist- 2nd Shift- $38.85 Plus $1,000 Sign-on Bonus
CNC Bearing Machinist- 2nd Shift- $38.85 Plus $1,000 Sign-on Bonus

Crane Company • Elyria (OH)

On-site
USD 44,000 - 63,000
Aerospace CNC Maintenance Technician - 2nd Shift
Aerospace CNC Maintenance Technician - 2nd Shift

Crane Aerospace & Electronics, Inc. • Elyria (OH)

On-site
USD 44,000 - 59,000
Health care
Dental, vision, life and disability
Education reimbursement
2nd Shift CNC Maintenance Technician
2nd Shift CNC Maintenance Technician

211 Hydro-Aire Aerospace Corp. • Elyria (OH)

On-site
USD 43,000 - 61,000
Health insurance
Education reimbursement
2nd Shift CNC Maintenance Technician - Aerospace
2nd Shift CNC Maintenance Technician - Aerospace

Barksdale Control Products • United States

On-site
USD 43,000 - 61,000
Health insurance
Dental insurance
Vision insurance
+3