Maintenance Technician

TydenBrooks Security Products Group

Tallapoosa (GA)

On-site

USD 30,000 - 47,000

Full time

25 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

TydenBrooks Security Products Group in Tallapoosa, GA is seeking a Maintenance Technician for plastic injection molding. You will keep presses, auxiliary equipment, and molds running safely, diagnosing faults and performing preventative maintenance.

Roles include supporting mold changes, startups, and basic process adjustments to maintain production efficiency. The position requires hands-on experience with hydraulics, pneumatics, and electrical control circuits, plus ability to read schematics

Qualifications

  • Three plus years of industrial maintenance experience; at least one year in plastic injection molding.
  • Ability to read electrical schematics, hydraulic diagrams, and mechanical prints.
  • Experience with mold changes and press startups on hydraulic and/or electric presses.

Responsibilities

  • Troubleshoot and repair hydraulic, electrical, pneumatic, and mechanical systems on injection molding presses.
  • Diagnose faults using schematics and PLC logic; respond to alarms.
  • Perform preventive maintenance on presses and auxiliary equipment.
  • Support mold changes, startup, and basic process adjustments.
  • Record work orders and downtime in CMMS; identify critical spare parts.

Skills

Troubleshooting
Documentation
Communication
Excel
Word
CMMS/ERP

Education

Associate degree

Tools

Multimeters
Megohmmeters
Hand tools
Power tools

Job description

Maintenance Technician – Plastic Injection Molding

Job Type: Full Time - Hourly

Location: Tallapoosa, GA

Reports to: Maintenance Supervisor

Job Summary

The Maintenance Technician keeps injection molding presses, auxiliary equipment, and molds running safely and at rate. The role troubleshoots and repairs hydraulic, electrical, pneumatic, and mechanical systems and carries out preventative maintenance. It also supports Processing with mold changes, press startups, and basic process adjustments.

Our Philosophy: Remember Safety, Quality, Quantity in that order!
Key Responsibilities
  • Troubleshoot and repair hydraulic, electrical, pneumatic, and mechanical systems on hydraulic and electric injection molding presses.
  • Diagnose faults using electrical schematics, hydraulic diagrams, PLC logic, and press controller alarms.
  • Maintain and repair auxiliary equipment, including dryers, loaders, blenders, TCUs, chillers, robots, conveyors, and granulators.
  • Perform scheduled preventive maintenance, such as oil and filter changes, hose inspections, heater band and thermocouple replacement, and lubrication.
  • Support plant utilities, including compressed air, cooling water / tower systems, and 480V three-phase power.
  • Perform basic in-press mold maintenance: water lines, O-rings, ejector and slide lubrication, venting, and cleaning.
  • Perform mold changes, including hanging molds and connecting water, hot runner, core-pull circuits, and end-of-arm tooling.
  • Start up presses from approved process sheets and make limited adjustments within approved windows to correct defects such as short shots, flash, sink, and splay.
  • Verify correct resin, colorant, regrind ratio, and drying conditions at startup, and escalating issues outside the process window to Process Engineering.
  • Respond quickly to breakdowns, find the root cause and recommend fixes that prevent repeat failures.
  • Record work orders, downtime causes, and parts used in the CMMS, and recommend critical spare parts to stock.
  • Install, level, and commission new presses and auxiliary equipment.
  • Follow all safety, lockout/tagout (LOTO), arc flash, 5S, and quality system requirements (ISO 9001 / IATF 16949 as applicable).
Required Qualifications
  • 3+ years of industrial maintenance experience, including at least 1 year in plastic injection molding.
  • Working knowledge of hydraulics, pneumatics, and 120/240/480V AC and 24V DC control circuits.
  • Able to read electrical schematics, hydraulic diagrams, and mechanical prints.
  • Experience with mold changes and press startups on hydraulic and/or electric presses (e.g., Arburg, Milacron, Nissei).
  • Able to use multimeters, megohmmeters, and hand and power tools.
  • Basic computer skills (Excel, Word, CMMS / ERP systems).
  • Good troubleshooting, documentation and communication skills.
Preferred Qualifications
  • PLC experience: troubleshooting Allen-Bradley or Siemens controls, servo drives and robot systems.
  • Hot runner experience with controller, heater, and thermocouple troubleshooting.
  • RJG Systematic Molding, Master Molder I, or equivalent scientific molding training.
  • Welding, fabrication and basic machining skills.
  • Forklift and overhead crane certification.
  • Associate degree or technical certificate in industrial maintenance, electrical or mechatronics.
Work Environment & Physical Requirements
  • Production floor environment with exposure to heat, noise, hydraulic oil, high voltage, and moving equipment. PPE required.
  • Able to stand and walk for long periods and lift up to 40 lbs.
  • Flexibility to support other shifts, weekends, overtime, and on-call rotation based on production needs.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Maintenance Technician
Maintenance Technician

Brooks Utility Products • Tallapoosa (GA)

On-site
USD 30,000 - 47,000
Maintenance Technician
Maintenance Technician

TydenBrooks • Tallapoosa (GA)

On-site
USD 28,000 - 44,000
Maintenance Technician
Maintenance Technician

Keter • Anderson (IN)

On-site
USD 45,000 - 65,000
Maintenance Technician
Maintenance Technician

Seaway Plastics • Brooksville (FL)

On-site
USD 52,000 - 70,000
Industrial Maintenance Technician (Injection Molding)
Industrial Maintenance Technician (Injection Molding)

Calqulate Metrics Ltd • Fraser (MI)

On-site
USD 55,000 - 75,000
Maintenance Technician Level I
Maintenance Technician Level I

Clayens • Atlanta (GA)

On-site
USD 34,000 - 48,000
Maintenance Technician Level I
Maintenance Technician Level I

Clayens NP Group • Atlanta (GA)

On-site
USD 34,000 - 48,000
Maintenance Technician (Manufacturing)
Maintenance Technician (Manufacturing)

SURGE Staffing • Valparaiso (IN)

On-site
USD 43,000 - 58,000
Maintenance Technician
Maintenance Technician

MCM Staffing • Belleville (MI)

On-site
USD 50,000 - 70,000
Maintenance Technician II (Injection Molding, Plastics)
Maintenance Technician II (Injection Molding, Plastics)

Schaefer Plastics North America, LLC. • Charlotte (NC)

On-site
USD 55,000 - 75,000