Maintenance Tech III Weekday 2nd shift

Burlington

Savannah (GA)

On-site

USD 70,000 - 110,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Burlington is seeking a Maintenance Lead Technician in Savannah to lead electrical and mechanical maintenance across material handling equipment. The role focuses on preventive/predictive maintenance, rapid troubleshooting, and supervising technicians on complex assets.

You will collaborate with peers, travel to nearby facilities for parts, and train junior staff while ensuring 480V electrical safety and compliance.

Qualifications

  • Degree from a technical or community college, or accredited industrial maintenance certifications (PLCs, Industrial Networks, Machine Logic, Robotics), with a focus in the Mechanical/Electrical fields
  • Experience with automated conveyor systems and controls
  • Experience with Material Handling Equipment (MHE) safety standards
  • Experience with Programmable Logic Control (PLC) programs and Human Machine Interfaces (HMIs)
  • Ability to troubleshoot Input/Output functions
  • Experience with robotic operation/maintenance
  • Physical Requirements (must be able to perform with or without reasonable accommodation)
  • Regular bending, lifting, stretching and reaching both below the waist and above the head
  • Lift and move totes or cartons up to 49 pounds each
  • Walking within and around the site with great frequency
  • Ability to climb ladders and gangways safely and without limitation, and work off platforms and equipment at height

Responsibilities

  • Maintain and troubleshoot electrical/mechanical aspects of Material Handling Equipment (MHE), including conveyors, sortation, robotics, or ASRS
  • Control and adjust positioning accuracy and timing
  • Control and adjust scanners, cameras, scales and printer applicators
  • Control, reset, repair or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)
  • Clean, lubricate, and calibrate equipment
  • Install, maintain, and troubleshoot relay logic, ladder diagrams, and control components
  • Troubleshoot PLC programs, components (CPU back planes, I/O boards, counters, modules, and devices)
  • Configure and adjust PLC parameters and component setup
  • Develop work plans with peer technicians for emergency repair of critical assets
  • Utilize handheld devices and asset management system mobile apps to create and close Work Orders with data
  • Follow safety procedures and use PPE while maintaining a safe work environment

Skills

Electrical maintenance
Mechanical maintenance
Conveyor systems
MHE safety
Troubleshooting
PLC programming
HMI programming
Robotics maintenance
Electrical/low-high voltage knowledge

Education

Technical/Community College degree or certifications in industrial maintenance

Tools

PLC software
HMI software
Robotics maintenance tools
Industrial electrical tools

Job description

Requirements


  • Degree from a technical or community college, or accredited industrial maintenance certifications (PLCs, Industrial Networks, Machine Logic, Robotics), with a focus in the Mechanical/Electrical fields

  • Experience with automated conveyor systems and controls

  • Experience with Material Handling Equipment (MHE) safety standards

  • Experience with Programmable Logic Control (PLC) programs and Human Machine Interfaces (HMIs)

  • Ability to troubleshoot Input/Output functions

  • Experience with robotic operation/maintenance

  • Physical Requirement s (must be able to perform with or without reasonable accommodation)

  • Regular bending, lifting, stretching and reaching both below the waist and above the head

  • Lift and move totes or cartons up to 49 pounds each

  • Walking within and around the site with great frequency

  • Ability to climb ladders and gangways safely and without limitation, and work off platforms and equipment at sig


Additional Information

Position OverviewAs a Burlington Maintenance Lead Technician, you will be a key technical subject matter expert that ensures high equipment availability rates. You will use preventive and predictive maintenance processes, rapidly troubleshoot equipment breakdowns, and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Burlington maintenance technicians to solve difficult problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, handle multiple projects, and work with a sense of urgency. You will collaborate with others to perform Root Cause Analysis for equipment failures and fix systemic issues using careful observation and diagnostic tools. You will have an expert understanding of system controls logic and troubleshooting techniques. As the technical subject matter expert on a shift, you will also act as a technical trainer, sharing your knowledge with maintenance technicians and technician trainees to enhance their technical skills and job knowledge. You will operate Burlington-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities to procure parts and supplies as needed.SHIFT: Monday through Thursday 2nd shiftA Day in the LifeMaintain and troubleshoot electrical/mechanical aspects of Material Handling Equipment (MHE), including conveyors, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Control and adjust positioning accuracy and timingControl and adjust scanners, cameras, scales and printer applicatorsControl, reset, repair or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentInstall, maintain , and troubleshoot relay logic, ladder diagrams, and control components-- photo eyes, motor starters, relays, limit switches, proximity sensors, timers, solenoids, Servo drives, frequency inverters, linear drives, tachometers and encodersTroubleshoot PLC programs, components (CPU back plains, I/O boards, counters, modules, and devices), field buses (ASI, Profibus, DeviceNet , etc.), and communications modules (Ethernet).Configure and adjust PLC parameters and component setupConduct maintenance and higher-level troubleshooting of any robot typeTroubleshoot power distribution systems, branch circuits, lighting systems, transformers, and wiring methods and materials, up to 480VDevelop work plans with peer technicians for emergency repair of critical assetsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazards.You'll Come WithHigh school diploma or equivalent required4+ years' experience in the Mechanical or Electrical maintenance field in a distribution center environmentPossess or ability to obtain a valid driver's licenseExcellent PC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuringExperience in the following areas:Preventive/predictive maintenance proceduresCommonly used industrial toolsBasic Carpentry and PlumbingBasic metal fabrication and weldingBlueprint and schematic readingWork order managementIndustrial Electrical, Controls and ElectronicsProgrammable Logic Control (PLC) programsNational Electrical Code (NEC) and Material Handling Equipment (MHE) safety standardsAutomated material handling equipment or robotic maintenance


Your Match

How well this role fits your profile.


Confirmed H-1B sponsor. The Department of Labor record shows filings under BURLINGTON COAT FACTORY WAREHOUSE CORPORATION .


Filings 27


Approved 85.2%


Avg wage $124K


From public Department of Labor LCA disclosures. Sponsorship history is a signal about the employer, not a commitment on this role.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Maintenance Technician II: Weekday 2nd shift
Maintenance Technician II: Weekday 2nd shift

Burlington • Savannah (GA)

On-site
USD 30,000 - 47,000
Associate discount
Medical coverage
Dental coverage
+2
Maintenance Technician I Weekend Day Shift
Maintenance Technician I Weekend Day Shift

Burlington • Savannah (GA)

On-site
USD 30,000 - 47,000
Associate discount
Medical benefits
Dental benefits
+1
Lead Maintenance Technician - Night shift
Lead Maintenance Technician - Night shift

Burlington • Washington

On-site
USD 90,000 - 120,000
Lead Maintenance Technician - Night shift
Lead Maintenance Technician - Night shift

BCF Whse. of Edgewater Park, Inc. • Logan (UT)

On-site
USD 41,000 - 55,000
Associate discount
Medical/dental/vision insurance
Paid time off & holidays
+1
Maintenance Technician III (2nd Shift)
Maintenance Technician III (2nd Shift)

Burlington Stores, Inc. • Ellabell (GA)

On-site
USD 38,000 - 54,000
Associate discount
Paid time off
Paid holidays
+1
Maintenance Tech III SI
Maintenance Tech III SI

Burlington • San Bernardino (CA)

On-site
USD 41,000 - 56,000
Medical insurance
Dental insurance
Vision insurance
+6
Maintenance Tech II SIII
Maintenance Tech II SIII

Burlington • Florence Township (NJ)

On-site
USD 27,000 - 36,000
Medical, dental & vision benefits
Life & disability insurance
Paid time off
+2
Maintenance Technician II: Weekday 2nd shift
Maintenance Technician II: Weekday 2nd shift

Burlington • Ellabell (GA)

On-site
USD 34,000 - 49,000
Health insurance
Dental and vision coverage
Life and disability insurance
+1
Maintenance Technician III (Weekend Day Shift)
Maintenance Technician III (Weekend Day Shift)

Burlington Stores, Inc. • Ellabell (GA)

On-site
USD 40,000 - 57,000
Associate discount
Paid time off
401(k) plan
Maintenance Tech 1: Weekday 2nd shift
Maintenance Tech 1: Weekday 2nd shift

Burlington • Ellabell (GA)

On-site
USD 29,000 - 41,000
Associate discount
Medical, dental and vision coverage