Maintenance Journeyman - Electrical / Instrument and Controls (I&C)

Luminant Power LLC

Ohio

On-site

USD 65,000 - 90,000

Full time

4 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Vistra Energy Corp. in North Bend, Ohio seeks an experienced I&C technician to inspect, test, calibrate, and repair process control systems and associated equipment. You will work with station operators to maintain control circuits and ensure safe, reliable plant operation.

You will troubleshoot, install, and adjust various control equipment, pipes, and wiring, while directing others in tests and calibrations and maintaining safety standards across the plant.

Qualifications

  • Must meet GENERAL QUALIFICATIONS; must have I&C Apprentice qualifications and additional knowledge of meters, gauges, and other instruments and controls.
  • Must be able to climb ladders and work at heights.
  • Knowledge of testing, calibrating, troubleshooting and repairing instruments, controls, analyzers, and equipment.
  • Solid understanding of electronic, pneumatic and hydraulic circuits and components.
  • Knowledge of coal and fuel oil steam generation and turbines.

Responsibilities

  • Inspects, tests, adjusts, troubleshoots, calibrates and repairs process controls.
  • Operate valves to cut trips and control equipment.
  • Troubleshoot, test, calibrate and repair control circuits and systems.
  • Install and route wiring, pull conductors and connect equipment.
  • Direct and train staff during tests and calibrations.
  • Maintain safety practices and use safety equipment.

Skills

Troubleshooting
Electrical knowledge
Reading gauges/meters

Education

I&C Apprentice qualifications
General qualifications

Tools

Meters and gauges
Instruments and controls
Pneumatic & hydraulic systems
Electrical wiring

Job description

Job Summary

Under general supervision, inspects, tests, adjusts, troubleshoots, calibrates and repairs process controls when equipment is in or out of service.

Works closely with station operators while making repairs and adjustments to control circuits.

Job Description
  • Operating valves to properly cut trips and control equipment in and out of service.
  • Blowing out lines for primary metering, controls and trips using air or other fluid medium to keep lines open for proper operation.
  • Troubleshooting, testing, calibrating and repairing various types of electrical control circuits such as analog, digital, or distributed control systems and protective trip or interlock circuits.
  • Running conduit: installing necessary clamps and supports; pulling conductors and making connections; locating trouble on power and control circuits and making necessary repairs.
  • Meggering and testing insulation resistance on electrical equipment; adjusting and renewing brushes on rotating equipment.
  • Repairing and adjusting various low and high pressure hydraulic and pneumatic control systems and components.
  • Installing new control equipment.
  • Working in close cooperation with employees of other departments, vendors and others for the purpose of troubleshooting, repairing, and modifying control systems and components.
  • Directing others in tests of equipment for performance, efficiency, or calibration purposes.
  • Analyzing results of tests and making recommendations for optimum performance or repair of plant equipment.
  • Maintaining equipment associated with nuclear radioactive sources, running tests, and calibrating as required.
  • Maintaining software changes for process control systems.
  • Troubleshooting and making repairs to controls containing higher voltages such as exciters, uninterruptible power supplies, variable speed drives, etc.
  • Verifying field-marked process control system drawings prior to their submittal for changes.
  • Troubleshooting, repairing, and calibrating Stack Gas Emission monitoring equipment such as Opacity monitors and Continuous Emission Monitors.
  • Maintaining safe work practices utilizing all safety-related equipment, materials, and training.
  • Instructing and training employees in any classification in their work.
  • Installing meters, relays, recorders, switches and similar equipment on switchboards and making necessary wiring connections.
  • Taping high voltage connections (above 6900v).
  • Performing similar or less-skilled work.
  • Performs any of the duties of I&C Apprentice and Trainee.
Qualifications for the job include the following
  • Must meet the Company's requirements as to GENERAL QUALIFICATIONS; must have all the qualification of I&C Apprentice and, in addition: Must have a thorough knowledge of meters, gauges, and other instruments and controls, together with associated pneumatic, hydraulic or electrical connections; and a knowledge of the tools used in their maintenance, adjustment and repair.
  • Must be able to climb ladders and work at higher elevations on platforms, scaffolds, grating, etc.
  • Must have a thorough working knowledge of methods used in testing, calibrating, troubleshooting and repairing instruments, controls, analyzers and other mechanism and equipment.
  • Must have a good knowledge of electronic, pneumatic and hydraulic circuits and circuit components.
  • Must have a good understanding of principles involved in combustion of coal and fuel oil and the generation and utilization of steam.
  • Must have a good working knowledge of the steam turbines, boilers, balance of plant equipment and the functions of the equipment located therein.
  • Must have a thorough knowledge of the principles of operation of all water-treating equipment.
  • Must be able to understand and use manufacturers’ software to maintain or alter process control systems.
  • Must be capable of directing the work of several employees in an assignment.

All applicants must be a successful candidate on the Plant Operator Selection System/Power Plant Operations and Maintenance (POSS / MASS) program in order to be considered a candidate for this position.

All communication concerning the testing is sent to the candidate's email address provided during the application process.

Job Family Plant Operations Company Luminant Power LLC Locations North Bend, Ohio Ohio

We are a company of people committed to: Exceeding Customer Expectations, Great People, Teamwork, Competitive Spirit and Effective Communication.

It is the policy of the Company to comply with all employment laws and to afford equal employment opportunity to individuals in all aspects of employment, including in selection for job opportunities, without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, age, disability, genetic information, military service, protected veteran status, or any other consideration protected by federal, state or local laws.

If you are an individual with a disability and need assistance submitting an application or would like to request an accommodation, please email us at assistance@vistraenergy.com to make a request.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Maintenance Journeyman - Electrical / Instrument and Controls (I&C)
Maintenance Journeyman - Electrical / Instrument and Controls (I&C)

Vistra Corp. • North Bend (OH)

On-site
USD 39,000 - 55,000
Maintenance Journeyman - Electrical / Instrument and Controls (I&C)
Maintenance Journeyman - Electrical / Instrument and Controls (I&C)

TXU • Ohio

On-site
USD 70,000 - 110,000
CT Prod Tech - Simple Cycle
CT Prod Tech - Simple Cycle

TXU Energy (Vistra Corp) • North Bend (OH)

On-site
USD 60,000 - 86,000
CT Prod Tech - Simple Cycle
CT Prod Tech - Simple Cycle

Vistra Corp • North Bend (OH)

On-site
USD 60,000 - 86,000
I&C Plant Technician
I&C Plant Technician

Vistra Retail Operations Company • Odessa (TX)

On-site
USD 30,000 - 47,000
Senior I&C Technician
Senior I&C Technician

Luminant • Midlothian (TX)

On-site
USD 90,000 - 130,000
Senior I&C Technician
Senior I&C Technician

Vistra Corp • Midlothian (TX)

On-site
USD 90,000 - 130,000
CT Prod Tech - Simple Cycle
CT Prod Tech - Simple Cycle

Vistra Corp. • Monroe (OH)

On-site
USD 62,000 - 84,000
I & E Technician
I & E Technician

TXU Energy • United States

On-site
USD 65,000 - 100,000
Senior I&C Technician
Senior I&C Technician

TXU Energy (Vistra Corp) • Midlothian (TX)

On-site
USD 85,000 - 120,000