Senior I&C Technician

TXU Energy (Vistra Corp)

Midlothian (TX)

On-site

USD 85,000 - 120,000

Full time

7 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Luminant Power LLC in Midlothian, Texas, seeks a DCS Generation Specialist to ensure safe, reliable operation and maintenance of the ABB Advant DCS and associated instrumentation at a combined cycle plant.

The role requires troubleshooting DCS, PLCs, instrumentation, and networks, and providing technical support to Operations, Maintenance, Engineering, and leadership. Strong independent work and startup support are essential.

Qualifications

  • Minimum 6 years of related experience.
  • High School diploma or equivalent.
  • State license as required by the state.

Responsibilities

  • Provide technical support for the plant’s DCS and associated hardware/software.
  • Troubleshoot DCS hardware, software, and control logic.
  • Configure and maintain control strategies, interlocks, trips, and operator displays.
  • Understand interactions between DCS, instrumentation, electrical systems, and plant equipment.
  • Develop and implement DCS improvements to support safety, reliability, and efficiency.
  • Support DCS upgrades, expansions, and capital projects.
  • Maintain documentation and records for configurations and logic.
  • Train Operations and Maintenance personnel on DCS systems.

Skills

DCS
PLC
Instrumentation
Networking
Troubleshooting
Control systems
Commissioning
Alarm management

Education

High School Diploma
State license (as applicable)

Tools

ABB Advant DCS
Ethernet/IP
Modbus

Job description

Job Summary

The DCS Generation Specialist is responsible for the safe, reliable, and efficient operation, maintenance, troubleshooting, modification, and
support of the plant’s Distributed Control System (DCS) and associated instrumentation and control systems at a Combined Cycle Gas
Turbine (CCGT) power generation facility.
This position requires knowledge of industrial process control and the ability to troubleshoot DCS, PLC, instrumentation, networking, and
process control systems. The successful candidate will provide technical support to Operations, Maintenance, Engineering, and plant
leadership.
The primary control platform is ABB Advant DCS. Preferred candidates will have experience maintaining, troubleshooting, configuring,
modifying, and supporting DCS systems in an industrial or power generation environment. This position requires the ability to work independently, respond to plant issues, support outages and startups, and share technical knowledge
with team members.

Job Description
Key Responsibilities
DCS & Process Control
  • Provide technical support for the plant’s DCS, including controllers, I/O, operator stations, engineering stations, servers, networks, and associated hardware and software.
  • Troubleshoot DCS hardware, software, control logic, communications, and process control issues.
  • Configure, modify, and maintain control logic, sequences, permissive, interlocks, trips, control strategies, and operator displays.
  • Understand interactions between DCS controls, instrumentation, electrical systems, and plant equipment.
  • Develop and implement DCS improvements to support plant safety, reliability, efficiency, and performance.
  • Support DCS upgrades, expansions, replacements, and capital projects.
  • Maintain system configuration records, logic documentation, drawings, and related documentation.
  • Monitor system performance and identify issues that could affect plant operation.
Instrumentation & Controls
  • Troubleshoot, calibrate, repair, install, and maintain process instrumentation and control equipment.
  • Troubleshoot transmitters, control valves, positioners, switches, analyzers, sensors, actuators, and related equipment.
  • Apply process control principles to diagnose and improve plant systems.
  • Understand and troubleshoot PID loops, cascade control, feed-forward control, ratio control, split-range control, and sequential control strategies.
  • Perform control loop tuning and optimization.
  • Analyze loop performance and recommend improvements.
  • Assist with development and implementation of operating and maintenance procedures.
PLCs, Networking & Communications
  • Troubleshoot and maintain PLCs and PLC/DCS interfaces.
  • Support industrial communications networks and protocols.
  • Troubleshoot communications between DCS controllers, PLCs, remote I/O, intelligent devices, servers, and plant control systems.
  • Maintain working knowledge of protocols such as Ethernet/IP, Modbus, Profibus, OPC, or similar technologies.
  • Troubleshoot network hardware and communications issues affecting plant operations.
  • Understand basic industrial network architecture, addressing, switches, servers, and communications pathways.
Alarm Management & Operator Support
  • Support development and maintenance of alarm management strategies.
  • Identify nuisance, standing, excessive, or ineffective alarms and recommend improvements.
  • Configure alarms to provide operators with clear and useful information.
  • Work with Operations to resolve control system issues and improve plant operation.
  • Understand the use of graphics, alarms, trends, controls, and displays in plant operations.
Power Plant Support
  • Provide controls support during startups, shutdowns, outages, commissioning activities, testing, and major maintenance work.
  • Respond to DCS and instrumentation issues affecting generation, reliability, safety, or environmental compliance.
  • Troubleshoot issues involving gas turbines, steam turbines, HRSGs, generators, condensate systems, feedwater systems, cooling systems, emissions systems, and balance-of-plant equipment.
  • Assist Operations in identifying control-related causes of process and equipment issues.
  • Support plant projects, modifications, equipment replacements, and system upgrades.
  • Participate in commissioning, testing, and control system verification activities.
Documentation & Technical Analysis
  • Read and interpret P&IDs, one-line diagrams, control schematics, logic diagrams, loop drawings, equipment specifications, cause-and-effect diagrams, and vendor documentation.
  • Develop and maintain procedures, system documentation, configuration records, and troubleshooting guides.
  • Review historical and real-time process data to identify control system and equipment issues.
  • Use plant historians and process data systems to support troubleshooting and performance analysis.
  • Document system changes in accordance with plant configuration management practices.
Training & Leadership
  • Serve as a technical resource for I&C, DCS, Maintenance, and Operations personnel.
  • Train team members on DCS systems, instrumentation, controls, troubleshooting, and safe work practices.
  • Share knowledge and support employee development.
  • Work closely with Operations, Maintenance, Engineering, contractors, and management.
  • Promote accountability, reliability, safety, and continuous improvement.

All applicants must be a successful candidate on the Plant Operator Selection System/Power Plant Operations and Maintenance (POSS / MASS) program in order to be considered a candidate for this position. POSS / MASS exams are administered on an as-needed basis by Human Resources and _all communication concerning the testing is sent to the candidate’s email address_.

**Level of position will be determined by applicable skills/experience.**

Education, Experience & Skill Requirements
  • Minimum 6 years of related experience
  • Minimum of a High School diploma or equivalent
  • Demonstrate effective oral and verbal communications skills
  • If applicable, candidate will hold the required level of state license as recognized by the governing body of that particular state
Job Family

Plant Operations

Company

Luminant Power LLC

Locations

Midlothian, Texas

Texas

It is the policy of the Company to comply with all employment laws and to afford equal employment opportunity to individuals in all aspects of employment, including in selection for job opportunities, without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, age, disability, genetic information, military service, protected veteran status, or any other consideration protected by federal, state or local laws.

If you are an individual with a disability and need assistance submitting an application or would like to request an accommodation, please email usatassistance@vistraenergy.comtomake a request.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior I&C Technician
Senior I&C Technician

Vistra Corp • Midlothian (TX)

On-site
USD 90,000 - 130,000
Senior I&C Technician
Senior I&C Technician

Luminant • Midlothian (TX)

On-site
USD 90,000 - 130,000
I&C Plant Technician
I&C Plant Technician

Vistra Retail Operations Company • Odessa (TX)

On-site
USD 30,000 - 47,000
Instrument and Controls Technician
Instrument and Controls Technician

Vistra Energy Corp. • United States

On-site
USD 65,000 - 90,000
Senior I&C Technician
Senior I&C Technician

Vistra Corp. • Midlothian (TX)

On-site
USD 85,000 - 110,000
Plant Technician
Plant Technician

Vistra Retail Operations Company • Monahans (TX)

On-site
USD 39,000 - 47,000
Plant Technician 1
Plant Technician 1

Vistra Corp. • Graham (TX)

On-site
USD 45,000 - 60,000
Electrical I&C Technician
Electrical I&C Technician

Luminant Power LLC • Midlothian (TX)

On-site
USD 70,000 - 95,000
CT Prod Tech - Simple Cycle
CT Prod Tech - Simple Cycle

TXU Energy (Vistra Corp) • North Bend (OH)

On-site
USD 60,000 - 86,000
Instrumentation, Controls & Electrical (IC&E) Maintenance Technician
Instrumentation, Controls & Electrical (IC&E) Maintenance Technician

TXU Energy (Vistra Corp) • Dover (DE)

On-site
USD 70,000 - 110,000