Machinist B

L3Harris

Gardena (CA)

On-site

USD 44,000 - 82,000

Full time

3 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Health and disability insurance
401(k) match
Flexible spending accounts
Education assistance
Parental leave
Paid time off
Company-paid holidays

Job summary

L3Harris in Gardena, CA seeks a Level B Machinist to operate grinders and machining equipment, fabricating ceramic components to precise tolerances under supervision. You will set up machines, inspect parts, document work, and ensure safe, efficient operations.

The role requires 18 months+ grinding or machining experience, strong math and blueprint-reading skills, and the ability to follow detailed instructions.

Qualifications

  • Requires a High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates Degree with 0 to 2 years of prior related experience.
  • Minimum of 18 months of grinding or machining experience.
  • Good shop math skills and effective verbal and written communication skills.
  • Ability to follow detailed written and verbal instructions.
  • Ability to read and interpret blueprints.
  • Basic knowledge of geometric dimensioning and tolerancing (GD&T) symbols and inspection methods.
  • Hand-eye coordination sufficient to perform assigned tasks safely.

Responsibilities

  • Manufacture ceramic components to specifications under normal supervision.
  • Routinely inspect work for conformance to requirements. Work may be reviewed by a lead or supervisor for progress and accuracy.
  • Set up workstations with minimal assistance and perform most machine setups.
  • Complete required documentation, including timecards, work orders, and statistical data records.
  • Use calipers, micrometers, scales, and other measuring devices to inspect work.
  • Maintain clean, organized work areas and follow all safety protocols.
  • Operate up to 70% of the following equipment types, as trained and assigned: lappers, ID grinders, ID slicers, OD grinders, lathes, Blanchard grinders, surface grinders, fine grinders, vertical machining centers (VMCs), and multi-wire saws.
  • Perform preventive maintenance on assigned machines.
  • Cross-train others in efficient operating methods, as assigned.
  • Use statistical process control (SPC) techniques to monitor and improve work quality.
  • Transfer projects electronically and physically upon completion of grinding operations.
  • Perform additional duties as assigned and work overtime when required.
  • Qualifications: (see above)

Skills

Shop math
Verbal communication
Written communication
Blueprint reading
GD&T knowledge
Hand-eye coordination

Education

High School Diploma or equivalent
Associate degree

Job description

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Machinist B

Job Code: 47591

Job Location: Gardena, CA

Job Schedule: 9/80: Employees work 9 out of every 14 days- totaling 80 hours worked- and have every other Friday off

Job Description:

The Level B Machinist performs routine and repetitive manufacturing operations using grinding and machining equipment to fabricate ceramic components to precision tolerances. Working under normal supervision, this position performs most machine setups, inspects completed work, maintains production documentation, and supports safe and efficient operations.

Essential Functions:

  • Manufacture ceramic components to specifications under normal supervision.

  • Routinely inspect work for conformance to requirements. Work may also be reviewed by a lead or supervisor for progress and accuracy.

  • Set up workstations with minimal assistance and perform most machine setups.

  • Complete required documentation, including timecards, work orders, and statistical data records.

  • Use calipers, micrometers, scales, and other measuring devices to inspect work.

  • Maintain clean, organized work areas and follow all safety protocols.

  • Operate up to 70% of the following equipment types, as trained and assigned: lappers, ID grinders, ID slicers, OD grinders, lathes, Blanchard grinders, surface grinders, fine grinders, vertical machining centers (VMCs), and multi-wire saws.

  • Perform preventive maintenance on assigned machines.

  • Cross-train others in efficient operating methods, as assigned.

  • Use statistical process control (SPC) techniques to monitor and improve work quality.

  • Transfer projects electronically and physically upon completion of grinding operations.

  • Perform additional duties as assigned and work overtime when required.

    Qualifications:

  • Requires a High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates Degree with 0 to 2 years of prior related experience.

  • A minimum of 18 months of grinding or machining experience.

  • Good shop math skills and effective verbal and written communication skills.

  • Ability to follow detailed written and verbal instructions.

  • Ability to read and interpret blueprints.

  • Basic knowledge of geometric dimensioning and tolerancing (GD&T) symbols and appropriate inspection methods.

  • Hand-eye coordination sufficient to perform assigned tasks safely.

    Preferred Additional Skills:

  • Perform varnish and heat treat operations for all products as required

  • Perform simple to semi-complex cable assembly per shop order instructions and engineering drawing.

  • In compliance with pay transparency requirements, the salary range for this role in California is $44,000 - $81,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

  • #LI-BR2

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) . For information regarding your Right To Work, please click here for English (https://www.eeoc.gov/sites/default/files/2022-10/22-088_EEOC_KnowYourRights_10_20.pdf) or Spanish (https://www.eeoc.gov/sites/default/files/2022-10/22-088_EEOC_KnowYourRightsSp_10_20.pdf) .

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Machinist C - 2nd Shift
Machinist C - 2nd Shift

Jobtome • Huntsville (AL)

On-site
USD 30,000 - 39,000
Machinist B - 2nd Shift
Machinist B - 2nd Shift

L3Harris Technologies, Inc. • Huntsville (AL)

On-site
USD 28,000 - 39,000
Machinist-Bench - 2nd Shift
Machinist-Bench - 2nd Shift

L3Harris • Los Angeles (CA)

Hybrid
USD 44,000 - 78,000
Machinist-Bench - 2nd Shift
Machinist-Bench - 2nd Shift

L3Harris International • California

On-site
USD 44,000 - 78,000
Health insurance
Disability insurance
401(k) match
+1
Machinist A - 1st Shift
Machinist A - 1st Shift

L3Harris Technologies, Inc. • Huntsville (AL)

On-site
USD 28,000 - 41,000
Machinist D (Ceramic Machinist / Machine Operator, 2nd Shift)
Machinist D (Ceramic Machinist / Machine Operator, 2nd Shift)

L3Harris • Salt Lake City (UT)

On-site
USD 50,000 - 75,000
Machinist A - 3rd Shift
Machinist A - 3rd Shift

L3Harris Technologies, Inc. • Huntsville (AL)

On-site
USD 30,000 - 39,000
Machinist B - 2nd Shift
Machinist B - 2nd Shift

L3Harris Technologies, Inc. • Huntsville (AL)

On-site
USD 52,000 - 66,000
Machinist C - 3rd Shift
Machinist C - 3rd Shift

L3Harris • Huntsville (AL)

On-site
USD 30,000 - 41,000
Machinist A - Weekend Day Shift
Machinist A - Weekend Day Shift

L3Harris Technologies, Inc. • Huntsville (AL)

On-site
USD 25,000 - 39,000