Machinist - 3rd Shift

Prolec-GE Waukesha,Inc; Waukesha (WI); On-site; USD 42,000 - 70,000; Full time

Job summary

Prolec-GE Waukesha, Inc. is seeking a Machinist for its heavy manufacturing facility to fabricate and assemble pre-fab and machined components for transformers.

You will train to set up, lay out, mark, and finish components using calibrated measurement tools and a range of hand, powered, hydraulic, pneumatic, and machine tooling. You will work with mild steel, stainless steel, copper, and more, operating machines such as bandsaw, drill press, lathe, milling machine, and others while maintaining

Qualifications

• High School Diploma or Equivalent is required or equivalent.
• Experience in Machining/Fabrication preferred.
• Must be able to stand for extended periods and lift up to 50 lbs.
• Ability to read prints and technical drawings.
• Commitment to safety, quality, and craftsmanship.

Responsibilities

• Safety: Uphold all safety protocols and wear proper PPE.
• 5S: Maintain, Clean, and Organize Work Areas.
• Collaboration with supervision, team members, engineering, QA, and other functions.
• Follow prints, drawings, BOMs, and specifications to ensure precise assembly of components.
• Receive assignments from supervisor and execute operations per trained procedures.
• Perform routine cleaning, maintenance, and minor repairs on tooling and equipment.
• Assist in training new operators and participate in safety education.
• Conduct self-inspections of work and assist others in quality verifications.

Skills

Mechanical aptitude

Spatial awareness

Team-oriented

Attention to detail

Physical stamina

Education

High School Diploma or Equivalent

Tools

Band Saw

Material Saw

Drill Press

Radial Arm Drill Press

Piranha Punch

Material Lathe

Milling Machine

Grinders

Belt Sander

Cut Off Wheels

Lathe

Pneumatic Tooling

Cranes

Powered Industrial Vehicles

Media Blaster

Job description

The Machinist role is a heavy manufacturing position that focuses on the fabrication and assembly of pre-fab and machined components, vital internal sub-components of our transformers. In this position, operators would train to set up, layout, mark, and fabricate components using such tooling as calibrated measurement tools, an array of small hand tools, powered, hydraulic, pneumatic, and machine specific tooling to design specification and quantity per requested order. Operators will learn to manipulate and shape materials such as mild steel, cold rolled, hot rolled, copper, and stainless steel with multiple industrial machining apparatus. The operator will be expected to select, load, and finish the material used in the operations to known or trained criteria. Industrial Machines that will be trained on are Band Saw, Material Saw, Drill Press, Radial Arm Drill Press, Piranha Punch, Material Lathe, and Milling Machine; including a variety of other specialized tooling like grinders, belt sanders, and cut wheel saws. These operations and procedures will involve both single and team movements like bending, twisting, kneeling, and utilizing overhead cranes, forklifts, or other powered industrial vehicles. Operators will be expected to train, sustain, and demonstrate continued proficiency in their technical skills; including further development in additional levels all to the highest levels of safety, craftsmanship, and professionalism – all with a positive attitude and strong work ethic.

PRINCIPLE DUTIES AND RESPONSIBILITIES

• Safety: Uphold all safety protocols and wear proper Personal Protective Equipment (PPE)
• 5S: Maintain, Clean, and Organize Work Areas
• Collaboration: Work closely with Supervision, Team Members, Team Leads, Instructors, Engineering, Quality Assurance departments, and other functions as required.
• Precision & Quality: Follow Print Drawings, Technical Data Sheets, Bills of Material and specifications to ensure exact alignment, spacing, and assembly of Components
• Receive assignments and instructions from Supervisor - both Verbal and Written
• Complete specific Contamination Control, Inspection Requirements, Cleanliness Maintenance Procedures; such as Vacuuming, Performing Magnetic Sweeps, Wipedowns, and Cleaning Equipment/Tooling
• Select, Load, Set Up, Adjust, and Execute Operations of assigned / trained Industrial Machines
• Machine by process per Trained Procedures, Specifications/Criteria, and Prints/BOMs
• Verify accuracy of Machined Components as designated by In-Process Checklists; including Criteria, Tolerances, and Clearances
• Perform Minor Repairs/Defects and Tool/Equipment Maintenance (Write Repair Work Orders as Required)
• Repair Defects found in Inspection or Another Department as Needed/Required
• Assist in Training, Safety, and Protocol Education of New Operators
• Conduct Self Inspection of Winding and Assist Others in Inspection Verifications of Quality

KNOWLEDGE, SKILLS & ABILITIES

• Ability to follow instruction, apply effective time management skills, and complete assignments and expectations in a timely manner.
• Proficiency with Hand Tools, Grinders, Sanders, Cranes, Powered Industrial Vehicles, Pneumatic Tooling, Cut Off Wheels, Material Saw, Media Blaster, Lathe, Radial Arm Saw, Punch Press, Drill Press, Band Saw, and Milling Machine
• Materials used include, Mild Steel, Stainless Steel, Copper, Various Cleaning and Priming Agents, Weld Wire (Variant), Wheels, Abrasive Paper / Belts, Isopropyl Alcohol
• Strong Mechanical Aptitude and Spatial Awareness
• Ability to Lift a Minimum of 50lbs, Multiple times within a Work Shift
• Comfort working on your feet for 7 hours or more in a Work Shift, including Bending, Kneeling, and Twisting
• Attention to detail with the ability to interpret Complex Technical Drawings
• Team-Orientated Mindset with Strong Communication Skills & Commitment to Safety, Precision, and Craftsmanship

Page Break

EDUCATION AND EXPERIENCE

Required:

High School Diploma or Equivalent

Preferred:

Prior experience in Machining/Fabrication, Heavy Mechanical, Manufacturing, or Power Equipment

ADDITIONAL INFORMATION

Key Working Relationships

• Collaboration with Production Managers, Production Supervisor, Continuous Improvement, Engineering, Quality, EHS, and Planning

Physical Demands

• Must be able to stand for extended periods of time. Must be able to frequently walk and stand. Must occasionally be able to lift, climb, balance, push, pull, bend, twist, carry and sit. Will minimally work below waist level. Comfortability with working at heights of 12ft. or more.

Working Conditions

• Large-Scale Manufacturing facility for High-Voltage Power Transformers

Prolec-GE Waukesha, Inc. is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law.