Machinist 2 ›

mk North America, Inc.

Connecticut

Presencial

USD 48.000 - 52.000

Jornada completa

Hace 3 días
Sé de los primeros/as/es en solicitar esta vacante

Una candidatura completa en un minuto

Currículum y carta de presentación personalizados, listos para enviar.

Supera los filtros ATS

Ventajas ofrecidas por este puesto de trabajo

Medical, dental, and vision coverage
Company-funded life insurance
Long-term disability protection
PTO 120 hours + 7 holidays
401(k) with company match

Descripción de la vacante

mk North America, Inc. seeks a skilled CNC Machinist to program, set up and operate CNC lathes, mills and routers to machine metallic and nonmetallic workpieces. You will read 3D models and blueprints to determine tools, sequences and tolerances, and perform first piece inspections.

The role requires CAM experience (Fusion 360 preferred), ability to read drawings, and accuracy under pressure. This is a full-time, on-site position in Connecticut with a comprehensive benefits package.

Formación

  • Must be able to program, set up and operate CNC controlled equipment.
  • CAM experience is a must, Fusion 360 experience preferred.
  • Conversational control experience is preferred.
  • Must be able to read drawings/models.
  • Must be able to use measuring tools such as calipers, micrometers, and tape measure.

Responsabilidades

  • Read/view 3D model, blueprints or job order for product specs and tooling instructions.
  • Programs, selects, positions, and secures tools in toolholders.
  • Positions and secures workpiece in holding device, machine table, chuck, or fixtures.
  • Programs machine to position tool and workpiece and set feeds, speeds, depth of cut.
  • Observes operation and verifies conformance to specifications; performs first piece inspection.
  • Checks quality of parts produced versus print/model before release.

Conocimientos

CNC programming
Reading blueprints/drawings
Measurement accuracy
Attention to detail

Educación

High school diploma or GED
Technical/college degree preferred

Herramientas

Fusion 360

Descripción del empleo

This position is primarily responsible for programming, set up and operation of machines such as CNC lathes, CNC milling machines and CNC router to machine metallic and nonmetallic workpieces by performing the following duties personally or through the direction of the Machining/Fabrication Supervisor.

Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Read/view 3D model, blueprints or job order for product specifications such as dimensions and tolerances, and tooling instructions such as fixtures, feed rates, cutting speeds, depth of cut, and determines sequence of operations
  • Programs, selects, positions, and secures tools in toolholders (chuck, collet, or tool post)
  • Positions and secures workpiece in holding device, machine table, chuck, centers, or fixtures
  • Programs machine(s) to position tool and workpiece in relation to each other, and to set specified feeds, speeds, and depth of cut
  • Observes operation of machine and verifies conformance of machined workpiece to specifications
  • Responsible for first piece article inspection
  • Responsible for checking quality of parts produced versus print/model prior to releasing to the receiving department
Requirements
  • Must be able to program, set up and operate CNC controlled equipment
  • CAM experience is a must, Fusion 360 experience preferred
  • Conversational control experience is preferred
  • Must be able to read drawings/model
  • Must be able to use measuring tools such as calipers, micrometers and tape measure (inches and metric)
  • Attention to detail is crucial; Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness
  • Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments
  • Must be able to lift 75 lbs. and stand for long periods of time
Supervisory Responsibility:

This position has no supervisory responsibilities

This job solely operates in the machining department. This role routinely uses CNC and manual equipment. The employee will also be using measuring devices such as calipers, micrometers and tape measure.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Ability to lift 75 pounds. Moving manual push carts with heavier weights at times. While performing the duties of this job, the employee occasionally works near moving mechanical parts. The noise level in the work environment is usually loud.

Position Type/Expected Hours of Work:

This is a full-time non-exempt position. Hours of work are Monday through Friday, 6:30 a.m. to 3:00 a.m., 40 hours per week.

Wage:

The starting wage range for this position is $35-38 per hour. The salary range for this position is commensurate with the candidate’s experience, technical skills, CNC programming and setup capabilities, CAM software proficiency, and overall qualifications.

Our comprehensive benefits package includes medical, dental, and vision health coverage, as well as 100% company-funded group life insurance and long-term disability protection. Employees can also customize their coverage with a suite of voluntary, employee-paid benefits, including pet insurance and supplemental health options.

Paid Time Off: 120 hours PTO, 7 paid holidays. Full PTO benefits inclusive of Connecticut Paid Sick Leave compliance

Retirement: 401(k) plan with a company match: 100% of the first 3% in eligible compensation deferred and 50% of the next 2% in eligible compensation deferred

Travel:

No travel is expected for this position.

Required Education and Experience:
  • Must be able to program G-code and/or CAM software to apply
  • High school diploma or general education degree (GED), required; college/technical degree, preferred
  • Five plus years of related experience and/or training; or equivalent combination of education and experience
  • Knowledge of metric system a plus but not required
  • Knowledge of engineered blueprints is required
Other Duties:

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of th

Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

Machinist 2
Machinist 2

mk North America, Inc. • Bloomfield (CT)

Presencial
USD 48.000 - 52.000
Health benefits
Life insurance
401(k) match
+1
Machinist 2
Machinist 2

mk North America, Inc. • Bloomfield (CT)

Presencial
USD 48.000 - 52.000
Health benefits
Life insurance
Disability coverage
+2
Machinist
Machinist

mk North America, Inc. • Bloomfield (CT)

Presencial
USD 34.440 - 37.195
CNC Machinist
CNC Machinist

Knowles Precision Devices • San Diego (CA)

Presencial
USD 65.000 - 90.000
CNC Machinist
CNC Machinist

Knowles Corporation • San Diego (CA)

Presencial
USD 55.000 - 75.000
CNC Operator/Manual Machinist
CNC Operator/Manual Machinist

All Fill Inc • Downingtown

Presencial
USD 52.000 - 78.000
Machinist
Machinist

C & S Machine & Manufacturing Corporation • Kentucky

Presencial
USD 30.000 - 47.000
Machinist III - 3rd Shift
Machinist III - 3rd Shift

Standex • New Berlin (WI)

Presencial
USD 55.000 - 75.000
Toolmaker/Machinist
Toolmaker/Machinist

Arthur G Russell Company • Bristol (CT)

Presencial
USD 60.000 - 90.000
CNC Programmer
CNC Programmer

Birmingham Search Group • Hastings (MI)

Presencial
USD 40.000 - 55.000