Machinist 2

mk North America, Inc.; Bloomfield (CT); On-site; USD 48,000 - 52,000; Full time

Benefits offered by this job

Health benefits

Life insurance

Disability coverage

Paid time off

401(k) plan

Job summary

mk North America, Inc. in Connecticut is seeking a skilled CNC programmer who can set up and operate lathes, mills, and routers to machine metal and nonmetal parts.

You will read 3D models and blueprints, select and secure tools, program machine movements, and verify parts meet specs. The role requires attention to detail, ability to lift 75 lbs, and the capacity to stand for long periods in a loud machining environment.

Qualifications

• Must be able to program, set up and operate CNC equipment.
• CAM experience required; Fusion 360 preferred.
• Able to read drawings/blueprints.
• Able to lift 75 lbs and stand for long periods.

Responsibilities

• Read/view 3D models, blueprints or job orders for specs and tooling.
• Program, position, and secure tools in toolholders.
• Position and secure workpieces in holding devices and fixtures.
• Program machines to position tool and workpiece; set feeds and speeds.
• Observe machine operation and verify conformance to specs.
• Responsible for first piece inspection and quality checks.

Skills

G-code programming

CAM software

Blueprint reading

Measurement tools

Education

High school diploma or GED

Tools

CNC machines

Fusion 360

Job description

Short description

Program, set up and operate CNC controlled equipment

Description

Program, set up and operate CNC controlled equipment

Job Description

This position is primarily responsible for programming, set up and operation of machines such as CNC lathes, CNC milling machines and CNC router to machine metallic and nonmetallic workpieces by performing the following duties personally or through the direction of the Machining/Fabrication Supervisor.

Essential Functions

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Read/view 3D model, blueprints or job order for product specifications such as dimensions and tolerances, and tooling instructions such as fixtures, feed rates, cutting speeds, depth of cut, and determines sequence of operations
• Programs, selects, positions, and secures tools in toolholders (chuck, collet, or tool post)
• Positions and secures workpiece in holding device, machine table, chuck, centers, or fixtures
• Programs machine(s) to position tool and workpiece in relation to each other, and to set specified feeds, speeds, and depth of cut
• Observes operation of machine and verifies conformance of machined workpiece to specifications
• Responsible for first piece article inspection
• Responsible for checking quality of parts produced versus print/model prior to releasing to the receiving department

Requirements

• Must be able to program, set up and operate CNC controlled equipment
• CAM experience is a must, Fusion 360 experience preferred
• Conversational control experience is preferred
• Must be able to read drawings/model
• Must be able to use measuring tools such as calipers, micrometers and tape measure (inches and metric)
• Attention to detail is crucial; Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness
• Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments
• Must be able to lift 75 lbs. and stand for long periods of time

Supervisory Responsibility

This position has no supervisory responsibilities

Work Environment

This job solely operates in the machining department. This role routinely uses CNC and manual equipment. The employee will also be using measuring devices such as calipers, micrometers and tape measure.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Ability to lift 75 pounds. Moving manual push carts with heavier weights at times. While performing the duties of this job, the employee occasionally works near moving mechanical parts. The noise level in the work environment is usually loud.

Position Type/Expected Hours Of Work

This is a full-time non-exempt position. Hours of work are Monday through Friday, 6:30 a.m. to 3:00 a.m., 40 hours per week.

Wage

The starting wage range for this position is $35-38 per hour. The salary range for this position is commensurate with the candidate’s experience, technical skills, CNC programming and setup capabilities, CAM software proficiency, and overall qualifications.

Health & Wellness

• medical, dental, and vision health coverage
• 100% company-funded group life insurance
• long-term disability protection
• voluntary, employee-paid benefits, including pet insurance and supplemental health options
• Paid Time Off: 120 hours PTO, 7 paid holidays. Full PTO benefits inclusive of Connecticut Paid Sick Leave compliance
• Retirement: 401(k) plan with a company match: 100% of the first 3% in eligible compensation deferred and 50% of the next 2% in eligible compensation deferred

Travel

No travel is expected for this position.

Required Education And Experience

• Must be able to program G-code and/or CAM software to apply
• High school diploma or general education degree (GED), required; college/technical degree, preferred
• Five plus years of related experience and/or training; or equivalent combination of education and experience
• Knowledge of metric system a plus but not required
• Knowledge of engineered blueprints is required

Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.