Machinist

Textron Inc.; Williamsport (Lycoming County); On-site; USD 28,000 - 44,000; Full time

Job summary

Textron Systems: Lycoming Engines in Williamsport, PA is seeking a Machinist to operate continuous flow cell processes, set up CNC centers, and perform inspection duties. You will handle data collection, test equipment, and ensure product conformity in a safety-conscious environment.

The role requires at least a couple of years in general and CNC machining, along with the ability to read blueprints and use shop floor computers.

Qualifications

• High School diploma or GED required.
• Must pass Production Inspection Test.
• Must pass the Practical Test.
• Understand the fundamental principles of product validation in this cell.
• Must pass Lycoming Inspection Eye test, obtain and maintain certifications.
• Ability to read, interpret, and communicate technical information.
• Thorough knowledge of tools/fixtures, cutting tool params, and machining techniques.
• Operate and troubleshoot shop floor computers and related systems.
• Maintain quality through understanding gauging methods and inspection techniques.

Responsibilities

• Set-up and operate machining centers and related equipment to produce within procedures.
• Perform data collection using inspection instruments and test equipment.
• Test and inspect products and ensure final acceptance per criteria.
• Transfer to other positions during slack periods as needed and maintain safety.
• Record-keeping and housekeeping in the cell per procedures.
• Communicate issues promptly and contribute to continuous improvement.
• Assist tool design with fixtures and setups as required.
• Work with cross-functional teams to solve problems in real time.

Skills

Technical reading

Blueprint interpretation

Quality awareness

Team collaboration

Education

High School diploma or GED

Associate's Degree in Tool Making Technology or Automated Manufacturing

Tools

CNC machining centers

Shop floor computers

NDI training

Job description

Description

Machinist

Position Title: UAS FLEX CELL MACHINIST/ SMALL COMPUTER OPERATOR I

FLSA Status: NON-EXEMPT EXEMPT

Grade: 14 S

Job Code: L2S43D Division: P&M UNIT TOP UNIT

Department: 553

Date: 06/22/2018

\

• \

• DOD Related Position\

• \

• Noted on original JD in binder, but not in subsequent documents??

JOB SCOPE:

• Perform all operations within ac continuous flow-manufacturing cell, operating cutting saw, measuring, utilizing the skills and ability to set up and run all machines, as well as test equipment including burring within the cell, measure and record inspection results using electronic gauging and all other inspection equipment for data collection, and perform penetrant inspection for final acceptance or rejection of product.

RESPONSIBILITIES:

• Employee(s) will be transferred to other positions during slack periods and/or decreased workload.
• Must be able to perform assigned work in a safety conscious manner with regard to self and others working in the cell.
• Perform assigned cleaning required to maintain individuals work area in a clean condition.
• Perform other duties inherently required of the job classification.
• Set-up and operate machining centers, related equipment and inspection systems (including NDI training) to produce product within company processes and procedures.
• Perform assigned work to specified process including in statistical process control to ensure final product quality.
• Be familiar with and work within applicable company procedures and work instructions relative to job function.
• Communicate on a timely basis to all relevant personnel any issues found during the daily processing of product and identify opportunities for continuous improvement.
• Train or be trained as needed.
• Record keeping as required.
• Works with others across payrolls, functions, and shifts to solve problems in a timely manner (Real Time).
• Properly maintain cell/equipment and to perform all required system checks in accordance with applicable processing procedures and/or work instructions.
• Capable to work unsupervised in their area.
• Ensure “legacy” knowledge transfer.
• All other duties as assigned.

Position Title: UAS FLEX CELL MACHINIST/ SMALL COMPUTER OPERATOR I

Qualifications

QUALIFICATIONS:

• High School diploma or GED
• Must pass the Production Inspection Test
• Must pass the Practical Test
• Understand the fundamental principles of product validation in this cell
• Must pass Lycoming Inspection Eye test, obtain and maintain certifications
• Ability to read, interpret, and communicate technical information
• Demonstrate a thorough working knowledge of the selection of tools and fixtures, cutting tool parameters, and machining techniques
• Understand the operation of shop floor computers.
• Understand Quality principals, gauging methods, and inspection techniques.
• Capability to qualify, test, certify every three years in order to obtain and maintain certification to perform Level II NDI to the applicable acceptance criteria to assure product meets drawing requirements
• Have the personal and professional integrity and a responsible attitude to ensure that all manufacturing, engineering, and quality requirements have been completed to assure part compliance before final acceptance of product.
• Have a positive attitude with a flexible approach to cell operation and a commitment to achieving departmental objectives.
• Minimum 2 years' experience in “general” machining and 2 years CNC machining could be concurrent, (i.e. - milling, drilling, turning) or Associate's Degree (i.e. - Tool Making Technology or Automated Manufacturing) or equivalent manufacturing base degree including practical experience on machine tools, and must be able to troubleshoot, determine cause of malfunction and make necessary adjustments to maintain positive control of process and equipment
• Assist Tool Design, as needed, in new fixture, program proofing and tooling setups, maintain and monitor process, program readouts, and setup during the period of operation for required quality of parts.
• Ability to read and interpret complicated blueprints, and to work from operations sheets, processes, specification, manuals, and routings.
• Ability to use shop mathematics handbook formulas and a variety of precision measuring equipment.
• Strong organizational, interpersonal and follow-up skills
• Ability to articulate in both written/spoken word
• Forklift License if required

Good research and documentation skills

EEO Statement

Textron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of race, color, religion, age, national origin, military status, veteran status, disability, sex (including pregnancy and sexual orientation), genetic information or any other characteristic protected by law.

Preference given to Veterans of the U. S. Armed Forces.

Recruiting Company: Textron Systems: Lycoming Engines
Primary Location: US-Pennsylvania-Williamsport
Job Function: Manufacturing
Schedule: Full-time
Job Level: Individual Contributor
Job Type: Standard
Shift: First Shift
Travel: No
Job Posting: 07/21/2026, 2:05:54 PM
Job Number: 343876