Machine Operator III - Doxy 3rd Shift

Materion Corporation

Newton (MA)

Sur place

USD 39 000 - 49 000

Plein temps

Il y a 3 jours
Soyez parmi les premiers à postuler

Obtenez une réponse de cet employeur

Votre CV et votre lettre de motivation, adaptés exactement à ce que l’employeur recherche.

Passez les filtres ATS

Résumé du poste

Materion Corporation in Newton, MA is seeking a Machine Operator III for the 3rd shift to operate Jaw crushers, furnaces, dryers, and packaging equipment in LX powder production. The role emphasizes adherence to 6S, safety rules, and quality control while supporting on-time deliveries.

You will enter material movements in SAP, perform routine maintenance, and work as part of a team to resolve production issues.

Qualifications

  • Requires a high school diploma or equivalent with at least 2 years industrial manufacturing experience.
  • Welding education and experience desirable but not required.
  • Requires the ability to follow standard operating procedures and prescribed safety rules to maintain high quality standards and safe working conditions.
  • Requires mechanical aptitude, attention to detail, basic math skills.
  • Must adhere to strict environmental and safety rules and identify areas for improvement.
  • Expected to work as part of a team, to make good decisions, to anticipate production problems, and to resolve them with some assistance.

Responsabilités

  • Sets up and operates Jaw crushers, Tornado/Pin Mills and all blending equipment, to support the production of Tantalum powder.
  • Sets up and operates Doxy Furnaces, Doxy Leach and the chemical addition equipment for LX powders.
  • Sets up and operates Air Dryers, Screeners and Dry Magnet in the production of LX powders.
  • Sets up and runs Agglomeration furnaces.
  • Sets up and operates Vacuum Packaging equipment.
  • Performs troubleshooting and routine preventative maintenance tasks on production equipment.
  • Enters material movements in SAP, completes all associated quality control paperwork and lot traceability paperwork.
  • Maintains work area in a clean, safe, and orderly condition following 6S standard work practices.
  • Follows prescribed safety rules and regulations and standard operating procedures to ensure personal safety and high product quality.

Connaissances

Mechanical aptitude
Attention to detail
Basic math skills
Team player
Safety conscious

Formation

High school diploma or equivalent

Description du poste

Machine Operator III - Doxy 3rd ShiftWe use cookies when you visit our website to keep the website functional, for analysis, to improve user-friendliness and for other functions. To learn more about cookies and how to disable them, please read our cookie policy.# Materion Careers## Machine Operator III - Doxy 3rd ShiftApply: Newton, MA: Posted Today: 2026-R8936### **At Materion, everyone is included, respected and offered opportunity to grow. *Join us!*****3rd Shift**: Sunday thru Friday 1030pm-7am **Job Description****POSITION SUMMARY** The position is responsible for operate all equipment associated with the preparation and production of LX powders supporting deliveries of a premium powder product **ESSENTIAL FUNCTIONS and RESPONSIBILITIES** * Sets up and operates Jaw crushers, Tornado/Pin Mills and all blending equipment, to support the production of Tantalum powder.* Sets up and operates Doxy Furnaces, Doxy Leach and the chemical addition equipment for LX powders.* Sets up and operates Air Dryers, Screeners and Dry Magnet in the production of LX powders.* Sets up and runs Agglomeration furnaces.* Sets up and operates Vacuum Packaging equipment.* Performs troubleshooting and routine preventative maintenance tasks on production equipment.* Performs product blending and sampling as required* Enters material movements in SAP, completes all associated quality control paperwork and lot traceability paperwork to assure product is clearly tested and identified.* Performs troubleshooting and routine preventative maintenance tasks on production equipment.* Maintains work area in a clean, safe, and orderly condition on a daily basis by following 6S standard work practices.* Follows prescribed safety rules and regulations and standard operating procedures to ensure personal safety and high product quality. **QUALIFICATIONS/SKILLS** Requires a high school diploma or equivalent with at least 2 years industrial manufacturing experience. Welding education and experience desirable but not required. Requires the ability to follow standard operating procedures and prescribed safety rules to maintain high quality standards and safe working conditions. Requires mechanical aptitude, attention to detail, basic math skills Must adhere to strict environmental and safety rules and identify areas for improvement. Expected to work as part of a team, to make good decisions, to anticipate production problems, and to resolve them with some assistance. **PHYSICAL DEMANDS and WORK ENVIRONMENT** Position requires direct contact on the manufacturing floor and requires ambulation Work time is spent in a factory environment where temperatures fluctuate See the Occupational Demands Form for this position on file in the Occupational Health OfficeThe above description covers the most significant duties performed but does not exclude other occasional work assignments not mentioned, the inclusion of which would be in conformity with the level of the job. Pay Range:$28.54-$35.25 *Actual base salary offered varies based on factors, including but not limited to, relevant skill, prior experience, education, base salary of internal peers, demonstrated performance, and geographic location.***The selection of the person to be hired for this position is contingent on the candidate having export compliance eligibility for access to U.S. controlled technology which comes under the licensing jurisdiction of the U.S. Department of State, International Traffic in Arms Regulations (ITAR) and the U.S. Department of Commerce, Export Administration Regulations (EAR).****The candidate selected will have to qualify as either a U.S. citizen, a U.S. National, a lawful permanent resident of the U.S., a Person Admitted into the U.S. as an Asylee or Refugee., a National of a country that is not prohibited from having access to U.S. controlled technology (via a letter of assurance), or a Person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on Materion’s determination that it will be able to obtain an export license in a time frame consistent with Materion’s business requirements.****Materion Corporation and its subsidiaries (the “Company”) is an equal employment opportunity employer. It is the Company’s policy to not unlawfully discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also the Company’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants.****Applicants with disabilities may be entitled to reasonable accommodation under the terms of the Americans with Disabilities Act and certain state or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on the Company. Please inform the Company’s personnel representative if you need assistance completing any forms or to otherwise participate in the application process.****Materion’s Veteran Employee Resource group supports veterans and promotes the benefits of hiring veterans in the workplace. We honor all those who have served and are a military friendly company. Veterans are encouraged to apply and military experience and skills are transferrable to Materion careers.****Please provide complete information. An incomplete application may affect your consideration for employment.**### Traded on the New York Stock Exchange (NYSE: MTRN) and headquartered in Cleveland, Ohio, Materion has over 3,500 global employees in 32 countries with an expanding footprint growing each and every day.
Obtenez votre examen gratuit et confidentiel de votre CV.

ou faites glisser et déposez votre fichier ici.

Similar jobs

Postes similaires à comparer

Machine Operator III - Doxy 2nd Shift
Machine Operator III - Doxy 2nd Shift

Materion Corporation • Newton (MA)

Sur place
USD 39 000 - 49 000
Machine Operator III - Doxy 2nd Shift
Machine Operator III - Doxy 2nd Shift

Materion • Newton Upper Falls (MA)

Sur place
USD 39 000 - 49 000
Machine Operator III - Doxy 3rd Shift
Machine Operator III - Doxy 3rd Shift

Materion Corporation • Newton (MA)

Sur place
USD 39 000 - 49 000
Machine Operator I - Machining (3rd Shift)
Machine Operator I - Machining (3rd Shift)

Materion • Newton (MA)

Sur place
USD 33 000 - 40 000
ARC Melter I - 3rd Shift
ARC Melter I - 3rd Shift

Materion • Newton (MA)

Sur place
USD 37 000 - 46 000
Machine Operator III - Rod & Wire (1st Shift)
Machine Operator III - Rod & Wire (1st Shift)

Materion • Newton (MA)

Sur place
USD 50 000 - 61 000
Machine Operator - Conditioning (2nd shift)
Machine Operator - Conditioning (2nd shift)

Materion • Newton (MA)

Sur place
USD 30 000 - 37 000
Sizing Technician I
Sizing Technician I

FAB Materion Advanced Chemicals Inc • Milwaukee (WI)

Sur place
USD 23 000 - 32 000
Machine Operator I - Machining (3rd Shift)
Machine Operator I - Machining (3rd Shift)

Materion Corporation • Newton (MA)

Sur place
USD 33 000 - 40 000
Operator III, Manufacturing
Operator III, Manufacturing

Materion • Town of Wheatfield (NY)

Sur place
USD 30 000 - 43 000