Machine Operator I - Machining (3rd Shift)

Materion

Newton (MA)

In loco

USD 33.000 - 40.000

Tempo pieno

14 giorni+

Aumenta le possibilità di ricevere una risposta da questo datore di lavoro

Il tuo curriculum e una lettera di presentazione personalizzati, che corrispondono esattamente a ciò che sta cercando.

Supera i filtri ATS

Descrizione del lavoro

Materion is seeking a dedicated Machine Operator to safely run and monitor production equipment used in advanced materials manufacturing. You will ensure product quality, maintain records, and support efficient material flow while following SOPs and safety guidelines.

The ideal candidate has a high school diploma or GED, basic computer skills, and a mechanical mindset with strong attention to detail. This role offers growth opportunities within a lean manufacturing environment.

Competenze

  • High School Diploma or GED required; manufacturing experience preferred.
  • Ability to read and interpret technical documents and drawings.
  • Proficient with measurement tools such as micrometers, calipers, gauges.
  • Basic computer skills including MS Office and email.
  • Mechanical aptitude with troubleshooting ability.
  • Strong communication and teamwork capabilities.
  • Attention to detail and accuracy in documentation.

Mansioni

  • Operate production machinery such as rolling mills and furnaces.
  • Perform minor setup, adjustments and changeovers for production.
  • Monitor equipment and material flow; report issues promptly.
  • Conduct routine quality inspections and verify tolerances.
  • Maintain accurate production records and scrap documentation.
  • Handle measuring tools to ensure tight tolerances.
  • Move materials safely using hoists, cranes, and forklifts.
  • Follow SOPs, safety, and lean manufacturing practices.

Conoscenze

Reading technical docs
Measurement tools
Micrometers
Calipers
Basic computer literacy
Communication skills
Teamwork
Attention to detail

Formazione

High School Diploma or GED

Strumenti

Micrometers
Calipers
Gauges

Descrizione del lavoro

At Materion, everyone is included, respected and offered opportunity to grow. Join us!

Position Summary The Machine Operator is responsible for safely operating, monitoring, and maintaining production machinery used in the manufacturing of advanced materials. This role ensures consistent product quality, accurate documentation, and efficient material flow throughout the production process. The operator follows Standard Operating Procedures (SOPs), quality guidelines, and safety protocols to meet internal and external customer requirements.

Essential Duties & Responsibilities
  • Operate production machinery such as rolling mills, traverse winders, annealing furnaces, drawing equipment, and related material‑processing machines.
  • Perform minor machine setup, adjustments, and changeovers to support scheduled production activities.
  • Monitor equipment operation and material flow, identifying and reporting issues to supervisors promptly.
  • Conduct routine quality inspections to verify product dimensions, surface finish, cleanliness, and overall conformity to specifications.
  • Maintain accurate production records, operating data, scrap documentation, and material identification.
  • Must be able to collect and interpret defect data.
  • Use measuring tools such as micrometers, calipers, and gauges to ensure products meet tight tolerances (.0001).
  • Maneuver hoists, cranes, and forklifts to safely transport raw materials, tooling, and finished goods.
  • Keep the work area clean, organized, and in compliance with housekeeping and “lean” manufacturing expectations.
  • Participate actively in continuous improvement initiatives aimed at optimizing safety, quality, and production efficiency.
  • Follow all Standard Operating Procedures, safety guidelines, and quality standards to maintain safe and consistent production flow.
  • Perform additional duties as assigned by supervision.
Qualifications / Skills
  • Education & Experience High School Diploma or GED required. Previous machine operation experience in a manufacturing environment preferred.
  • Ability to complete required on‑the‑job training to become fully qualified.
  • Ability to read and interpret technical documents, customer specifications, and production instructions.
  • Proficiency using measurement tools such as micrometers, calipers, scales, and basic inspection devices.
  • Basic computer literacy, including use of Microsoft Office and email systems.
  • Mechanical aptitude and problem‑solving skills required for troubleshooting and minor machine adjustments.
  • Strong verbal and written communication skills.
  • Effective interpersonal skills and ability to work independently or as part of a team.
  • Ability to use weights and measurements and apply basic mathematical skills.
  • High degree of alertness, accuracy, and attention to detail.
Physical Demands & Work Environment

Regularly required to stand for extended periods and use hands to handle or adjust tools, materials, and machinery. Regularly lift and move up to 40 pounds; occasional lifting above 40 pounds with assistance. Requires sustained visual and mental concentration while performing inspections, data entry, and machine monitoring. Work performed in a clean‑room controlled atmosphere with minimal noise levels. Must wear appropriate protective equipment as required (e.g., gloves, finger cots).

Pay Range: $23.99-$29.39

The selection of the person to be hired for this position is contingent on the candidate having export compliance eligibility for access to U.S. controlled technology which comes under the licensing jurisdiction of the U.S. Department of State, International Traffic in Arms Regulations (ITAR) and the U.S. Department of Commerce, Export Administration Regulations (EAR).

The candidate selected will have to qualify as either a U.S. citizen, a U.S. National, a lawful permanent resident of the U.S., a Person Admitted into the U.S. as an Asylee or Refugee., a National of a country that is not prohibited from having access to U.S. controlled technology (via a letter of assurance), or a Person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on Materion’s determination that it will be able to obtain an export license in a time frame consistent with Materion’s business requirements.

Materion Corporation and its subsidiaries (the “Company”) is an equal employment opportunity employer. It is the Company’s policy to not unlawfully discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also the Company’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Applicants with disabilities may be entitled to reasonable accommodation under the terms of the Americans with Disabilities Act and certain state or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on the Company. Please inform the Company’s personnel representative if you need assistance completing any forms or to otherwise participate in the application process. Materion’s Veteran Employee Resource group supports veterans and promotes the benefits of hiring veterans in the workplace. We honor all those who have served and are a military friendly company. Veterans are encouraged to apply and military experience and skills are transferrable to Materion careers. Please provide complete information. An incomplete application may affect your consideration for employment. Traded on the New York Stock Exchange (NYSE: MTRN) and headquartered in Cleveland, Ohio, Materion has over 3,500 global employees in 32 countries with an expanding footprint growing each and every day. End with an invitation to learn more about what we do or working at Materion.

Ottieni la revisione del curriculum gratis e riservata.

o trascina qui il file.

Similar jobs

Offerte di lavoro simili che vale la pena confrontare

Machine Operator I - Machining (3rd Shift)
Machine Operator I - Machining (3rd Shift)

Materion Corporation • Newton (MA)

In loco
USD 33.000 - 40.000
Machine Operator III - Rod & Wire (1st Shift)
Machine Operator III - Rod & Wire (1st Shift)

Materion • Newton (MA)

In loco
USD 50.000 - 61.000
Maintenance Mechanic II
Maintenance Mechanic II

Materion • Buffalo (NY)

In loco
USD 40.000 - 56.000
Process Engineer IV
Process Engineer IV

MAN Materion Newton Inc. • Newton (MA)

In loco
USD 132.000 - 171.000
Maintenance Technician I
Maintenance Technician I

FAB Materion Advanced Chemicals Inc • Milwaukee (WI)

In loco
USD 45.000 - 65.000
Machine Operator - Conditioning (2nd shift)
Machine Operator - Conditioning (2nd shift)

Materion • Newton (MA)

In loco
USD 30.000 - 37.000
Production Operator
Production Operator

Materion • Reading

In loco
USD 36.000 - 54.000
Operator III, Manufacturing
Operator III, Manufacturing

Materion • Town of Wheatfield (NY)

In loco
USD 30.000 - 43.000
Customer Support Specialist - Manufacturing
Customer Support Specialist - Manufacturing

Materion • Mayfield Heights (OH)

Ibrido
USD 52.000 - 70.000
Sizing Technician I
Sizing Technician I

FAB Materion Advanced Chemicals Inc • Milwaukee (WI)

In loco
USD 23.000 - 32.000