Machine Operator

Lsi Industries, Inc.; Tampa (FL); On-site; USD 37,000 - 52,000; Full time

Benefits offered by this job

401(k)

Health insurance

Vision insurance

Paid time off

Job summary

LSI Industries, Inc. in Tampa, FL is seeking a Machine Operator to set up and operate CNC routers, edge banders, and saws for wood and panel components. You will read job travelers, blueprints, and cut lists, set up tooling, and monitor quality throughout production while maintaining a clean, safe work area.

The role emphasizes accurate setup, routine maintenance, and on-time output, supporting downstream assembly and shipping with a focus on safety and teamwork.

Qualifications

• High school diploma or GED or equivalent.
• 1–3 years experience operating CNC machinery, edge banders, or saws in woodworking/manufacturing.
• Experience in millwork, cabinetry, or custom wood products is a plus.

Responsibilities

• Set up and operate CNC routers, edge banders, and saws to meet job specs.
• Read blueprints, cut lists, travelers, and CAD/CNC files to determine setup and sequence.
• Inspect parts with calipers, tape measures, and squares for dimensional accuracy.
• Perform routine machine maintenance and basic troubleshooting.
• Maintain production records and follow safety procedures including PPE usage.

Skills

CNC machining

Blueprint reading

Quality inspection

Safety compliance

Mechanical aptitude

Teamwork

Education

High school diploma or GED

1–3 years CNC experience in woodworking/manufacturing

Tools

CNC routers

Edge bander

Table saw / panel saw

CAD/CNC files

Job description

The Machine Operator supports EMI Industries’ 2nd shift woodshop/millwork operations in Tampa, Florida by setting up and operating CNC routers, edge banders, and saws to fabricate wood and panel components to specification. This role is responsible for reading and interpreting job travelers, blueprints, and cut lists; setting up tooling and fixtures; monitoring quality throughout the production run; and performing routine machine maintenance. The Machine Operator plays a key role in ensuring parts are produced accurately, safely, and on schedule to support downstream assembly and shipping.

Essential Job Functions:

• Set up and operate CNC routers/machining centers, including loading programs, setting work offsets, and installing tooling per job specifications.
• Set up and operate edge banding equipment to apply edge banding material to panel components, ensuring proper adhesion, trim, and finish quality.
• Set up and operate saws (table saw, panel saw, etc.) to cut wood/panel stock to specified dimensions.
• Read and interpret job travelers, cut lists, blueprints, and CAD/CNC program files to determine correct setup, tooling, and machining sequence.
• Inspect finished parts using measuring tools (tape measure, calipers, squares) to verify dimensional accuracy and conformance to specifications; flag and report non-conforming parts.
• Perform routine machine maintenance and minor troubleshooting (e.g., changing router bits/blades, clearing jams, cleaning dust collection) to keep equipment running efficiently.
• Maintain accurate production records, including quantities produced, scrap, and downtime, in accordance with EMI’s production tracking procedures.
• Follow all safety procedures and use required PPE (safety glasses, hearing protection, dust masks) when operating machinery.
• Maintain a clean and organized work area, including routine housekeeping and proper storage of materials, tooling, and scrap.
• Communicate with Production Planning, Supervisors, and other operators to coordinate job sequencing and material flow.
• Support continuous improvement efforts to reduce scrap, improve setup times, and enhance part quality.
• Perform other duties as assigned to support business needs.

Minimum Qualifications:

• Prior experience operating CNC equipment, edge banders, and/or panel/table saws in a woodworking, millwork, or cabinetry environment preferred.
• Ability to read and interpret blueprints, cut lists, and job travelers.
• Basic math skills, including the ability to take accurate measurements and perform simple calculations.
• Mechanical aptitude with the ability to perform basic machine setup, adjustment, and troubleshooting.
• Strong attention to detail and commitment to producing accurate, high-quality parts.
• Ability to work safely around moving machinery and power tools, following all safety protocols.
• Ability to lift, carry, and maneuver wood/panel stock and finished components as required.
• Ability to stand for extended periods and work in a fast-paced manufacturing environment.
• Good attendance and reliability; ability to work assigned shift, including occasional overtime.
• Ability to work independently and as part of a team.
• Forklift certification, or willingness to obtain one, is a plus.

Education and/or Experience:

• High school diploma or G.E.D. preferred; equivalent combination of education and experience will be considered.
• Minimum of one (1) to three (3) years of experience operating CNC machinery, edge banders, or saws in a woodworking or manufacturing environment preferred; entry-level candidates with strong mechanical aptitude may be considered for training.
• Prior experience in a millwork, cabinetry, or custom wood products environment is a plus.

Physical Demands:

The physical demands described here are representative of those necessary for an employee to successfully perform the essential functions of this job. Reasonable accommodation can be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee is regularly required to stand, walk, bend, and reach for extended periods on the shop floor. The employee must be able to lift and/or move wood/panel stock and finished components weighing up to 50 pounds regularly, and occasionally lift/move objects up to 75 pounds with assistance. Repetitive motion (loading/unloading material, operating machine controls) is required throughout the shift. Specific vision abilities required include close vision, distance vision, and the ability to adjust focus.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• The primary working conditions are those of a woodshop/manufacturing floor environment, with exposure to wood dust, noise from CNC equipment, edge banders, and saws, and occasional strong odors from adhesives and finishing materials. Personal protective equipment (PPE) such as safety glasses, hearing protection, and dust masks is required at all times on the production floor. The noise level is typically moderate.

SUMMARY:

Hours: Monday - Friday | 1:30 pm - 10:00 pm

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Deliver a uniform, high-quality powder finish on the product.
• Understand the principles of powder painting.
• Keep the department safe, clean, and organized.
• Locate and select the proper paint that is to be sprayed on particular parts (correct part#)
• Keep an accurate count of paint colors as it is used and put back into stock.
• Identify and trouble shoot finish problems.
• Clean out and replenish the paint filter in the spray booth.
• Wipe the collection booth down and prep for the next color.
• Be able to stay in place for extended periods to keep the product moving.
• 401(k)
• Health insurance
• Vision insurance
• Paid time off

EEOC:

LSI is committed to a diverse and inclusive workplace. LSI is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.