Low Voltage Installation Technician

3squaredtechnology; Montgomery, Northern (AL, KY); Hybrid; USD 42,000 - 66,000; Full time

Job summary

3 Squared Technology Group is seeking an experienced Low Voltage Installation Technician to perform commercial installations from start to finish, including pulling and terminating cable, installing cameras, and door-access hardware.

The ideal candidate will work independently or as part of a team in government and commercial environments, with a strong focus on quality workmanship, safety, and customer service.

Qualifications

• 2+ years of low-voltage installation experience preferred.
• Hands-on experience pulling and terminating structured cabling.
• Experience with Cat5e/Cat6/Cat6A cabling and RJ45 termination.
• Experience installing commercial IP security cameras.
• Experience with door access-control systems and electrified door hardware.
• Familiarity with electric strikes and magnetic locks.
• Ability to install and troubleshoot readers, door contacts, request-to-exit devices, and associated wiring.
• Basic understanding of Ethernet networking, TCP/IP, PoE, switches, and IP addressing.
• Ability to use cable testers, tone generators/probes, multimeters, hand tools, drills, and other installation equipment.
• Ability to read wiring diagrams, floor plans, and technical drawings.
• Strong troubleshooting and problem-solving abilities.
• Ability to work independently with limited supervision.
• Strong attention to detail and commitment to quality workmanship.
• Professional communication and customer-service skills.
• Valid driver’s license and reliable transportation.
• Ability to pass background checks and customer-site screening requirements.

Responsibilities

• Install, terminate, test, label, and troubleshoot Cat5e, Cat6, and Cat6A structured cabling.
• Pull and route low-voltage cable through ceilings, walls, conduit, cable trays, and other approved pathways.
• Install and terminate patch panels, network jacks, keystone modules, and related structured-cabling components.
• Install network and telecommunications racks, cabinets, cable management, and associated equipment.
• Test installed cabling using appropriate cable-testing equipment and correct identified faults.
• Install, mount, aim, configure, and test IP security cameras and surveillance equipment.
• Install and connect NVRs, PoE switches, camera power equipment, and related security infrastructure.
• Troubleshoot camera connectivity, cabling, power, positioning, and recording issues.
• Install and service electronic door access-control systems.
• Install card readers, keypads, door position switches, request-to-exit devices, and access-control controllers.
• Install and connect electric door strikes, magnetic locks (maglocks), and other electrified door hardware.
• Test doors and access-control components to verify proper locking, unlocking, egress, and system operation.
• Perform basic network configuration and troubleshooting for IP-connected cameras and security devices.
• Identify and troubleshoot wiring, termination, connectivity, and hardware problems.
• Read and follow floor plans, installation drawings, wiring diagrams, and equipment specifications.
• Label cables, equipment, patch panels, cameras, and access-control devices according to project requirements.
• Maintain accurate installation documentation, test results, equipment information, and photographs.
• Coordinate professionally with customers, project managers, IT personnel, electricians, locksmiths, and other trades.
• Maintain clean, organized, and professional installation sites.
• Follow all applicable workplace safety procedures and customer-site requirements.

Skills

Low-voltage installation

Structured cabling

IP networking basics

Troubleshooting

Customer-service skills

Tools

Cable testers

Multimeters

Tone generators/probes

RJ45 crimping tools

Punch-down tools

Drills

Ladders

Power tools

Network racks

Access-control wiring

Security mounting hardware

Job description

3 Squared Technology Group is seeking an experiencedLow Voltage Installation Technicianwith strong hands-on experience instructured cabling, security camera systems, and electronic door/access-control systems.

The ideal candidate is a field technician who can perform professional commercial installations from start to finish, including pulling and terminating cable, installing cameras, mounting and connecting access-control equipment, installing door hardware, testing systems, troubleshooting problems, and documenting completed work.

This position requires someone who is comfortable working independently as well as part of an installation team in commercial and government environments.

Key Responsibilities

Install, terminate, test, label, and troubleshootCat5e, Cat6, and Cat6A structured cabling.

Pull and route low-voltage cable through ceilings, walls, conduit, cable trays, and other approved pathways.

Install and terminate patch panels, network jacks, keystone modules, and related structured-cabling components.

Install network and telecommunications racks, cabinets, cable management, and associated equipment.

Test installed cabling using appropriate cable-testing equipment and correct identified faults.

Install, mount, aim, configure, and testIP security cameras and surveillance equipment.

Install and connect NVRs, PoE switches, camera power equipment, and related security infrastructure.

Troubleshoot camera connectivity, cabling, power, positioning, and recording issues.

Install and serviceelectronic door access-control systems.

Install card readers, keypads, door position switches, request-to-exit devices, and access-control controllers.

Install and connectelectric door strikes, magnetic locks (maglocks), and other electrified door hardware.

Install low-voltage power supplies and associated access-control wiring.

Assist with door hardware installation and adjustment as required for proper access-control operation.

Test doors and access-control components to verify proper locking, unlocking, egress, and system operation.

Perform basic network configuration and troubleshooting for IP-connected cameras and security devices.

Identify and troubleshoot wiring, termination, connectivity, and hardware problems.

Read and follow floor plans, installation drawings, wiring diagrams, and equipment specifications.

Label cables, equipment, patch panels, cameras, and access-control devices according to project requirements.

Maintain accurate installation documentation, test results, equipment information, and photographs.

Coordinate professionally with customers, project managers, IT personnel, electricians, locksmiths, and other trades.

Maintain clean, organized, and professional installation sites.

Follow all applicable workplace safety procedures and customer-site requirements.

Required Qualifications

2+ years of low-voltage installation experience preferred.

Hands-on experience pulling and terminating structured cabling.

Experience withCat5e/Cat6/Cat6A cabling and RJ45 termination.

Experience installing commercialIP security cameras.

Experience withdoor access-control systems and electrified door hardware.

Familiarity with electric strikes and magnetic locks.

Ability to install and troubleshoot readers, door contacts, request-to-exit devices, and associated wiring.

Basic understanding of Ethernet networking, TCP/IP, PoE, switches, and IP addressing.

Ability to use cable testers, tone generators/probes, multimeters, hand tools, drills, and other installation equipment.

Ability to read wiring diagrams, floor plans, and technical drawings.

Strong troubleshooting and problem-solving abilities.

Ability to work independently with limited supervision.

Strong attention to detail and commitment to quality workmanship.

Professional communication and customer-service skills.

Valid driver’s license and reliable transportation.

Ability to pass background checks and customer-site screening requirements.

Preferred Experience

Candidates with experience in several of the following areas will receive strong consideration:

• Structured cabling
• Cat5e/Cat6/Cat6A
• Fiber-optic cabling
• IP security cameras
• NVR systems
• PoE cameras and switches
• Electronic access control
• Card readers and keypads
• Electric strikes
• Magnetic locks / maglocks
• Low-voltage power supplies
• Network racks and patch panels
• Cable testing and certification
• Commercial or government facility installations

Tools & Technical Knowledge

The technician should be comfortable working with:

• Cable testers and certifiers
• Tone generators and probes
• Multimeters
• Punch-down tools
• RJ45 crimping and termination tools
• Fish tape and cable-pulling equipment
• Drills and standard power tools
• Ladders and lifts
• Network racks and patch panels
• Access-control wiring and power supplies
• Security camera mounting and installation hardware

Physical Requirements

• Ability to lift and carry up to approximately 50 pounds.
• Ability to climb and work from ladders and lifts.
• Ability to work above ceilings and in telecommunications rooms and other commercial installation environments.
• Ability to stand, walk, bend, kneel, reach, and perform physical installation work for extended periods.
• Ability to safely operate hand and power tools.

Preferred Certifications

The following certifications are beneficial but not required unless specified by the project:

• BICSI Installer or Technician
• CompTIA Network+
• OSHA 10 or OSHA 30
• Manufacturer-specific security camera certifications
• Manufacturer-specific access-control certifications
• Structured cabling or fiber certifications

Ideal Candidate

We are looking for atrue hands-on low-voltage technician, not simply an IT support technician.

The successful candidate should be capable of arriving at a job site, reviewing the installation requirements, pulling and terminating cable, installing and mounting security cameras, installing access-control devices and door hardware, testing the installation, troubleshooting issues, and delivering a professional finished product.

Strong cabling experience is essential. Experience with both security cameras and electronic door/access-control systems is highly preferred.

About 3 Squared Technology Group

3 Squared Technology Group is aService-Disabled Veteran-Owned Small Business (SDVOSB)providing technology, infrastructure, and professional services in support of government and commercial customers.

We value professionalism, accountability, technical excellence, quality workmanship, and outstanding customer service.

3 Squared Technology Group is an Equal Opportunity Employer.