Lead Manufacturing Engineer – Superconductor Power Terminations

VEIR; Boston (MA); On-site; USD 120,000 - 140,000; Full time

Benefits offered by this job

Healthcare coverage

401(k) Retirement Savings Program

12 Company Holidays + unmetered PTO

12 Weeks 100% Paid Parental Leave for

Stock Options

Employee Assistant Program (EAP)

Team teambuilding and lunch & learns

Job summary

VEIR, headquartered in Massachusetts, seeks a Lead Manufacturing Engineer to own the manufacturing strategy for our high‑power termination assembly. You will identify and onboard a contract manufacturer, optimize design for manufacturability, and build the quality and test infrastructure to scale from pilot builds to full production.

This hands‑on, high‑visibility role requires a strong background in contract manufacturing for complex electromechanical systems, with a focus on quality, cost, and

Qualifications

• 7+ years of manufacturing engineering experience with contract manufacturers for complex electromechanical or high‑power assemblies.
• Experience in DFM/DFA for high‑power systems (busbars, connectors, terminations, cable assemblies).
• Experience developing incoming inspection and final test/qualification plans.

Responsibilities

• Identify and onboard a contract manufacturer capable of producing the termination assembly at required cost, quality, and volume.
• Define and implement a quality strategy including incoming inspection and finished-assembly test plans.
• Establish in-process inspection points, sampling plans, and first-article inspection requirements at the CM.

Skills

DFM/DFA

Quality systems

CAPA/8D investigations

Root cause analysis

Supplier management

MRB dispositions

Travel willingness

Education

Bachelor's degree in Mechanical/Electrical/Manufacturing Engineering

Tools

SPC

FMEA

Job description

Lead Manufacturing Engineer – Superconductor Power Terminations

Woburn, Massachusetts, United States

WHY VEIR?

Founded in 2019 and headquartered in Woburn, Massachusetts, VEIR is a U.S.-based designer and manufacturer of category-defining superconducting power delivery systems built for the extreme energy demands of the AI era. By commercializing next-generation superconducting technology into deployable, real-world systems, VEIR delivers ~10× higher power density than conventional options, enabling “speed-to-power” where incremental optimization falls short. VEIR’s initial focus is AI data centers behind the meter, with solutions engineered for repeatable deployment through reference designs and integrated controls, designed to incorporate learnings as deployments scale.

The Role

We are seeking a Lead Manufacturing Engineer to own the manufacturing strategy for our termination assembly, a critical high‑power component in our system. You will identify and develop a contract manufacturing (CM) partner, optimize the design for manufacturability, and build the quality and test infrastructure needed to scale from pilot builds to full production.

This is a hands‑on, high‑visibility role for someone who thrives at the intersection of design engineering, supplier development, and quality systems, with a strong track record in contract manufacturing for high‑power electrical or electromechanical assemblies.

What You'll Do

• Identify, evaluate, and onboard a contract manufacturer capable of producing the termination assembly at the required cost, quality, and volume.
• Partner with the CM and our internal engineering team to optimize the termination assembly design for manufacturability, cost, and lead time (DFM/DFA).
• Define and implement a quality strategy for the assembly, including incoming material inspection/qualification and finished‑assembly test and qualification plans, to remove risk before the product ships.
• Establish in‑process inspection at the CM: define inspection points and sampling plans, measurement/gauging methods, and first‑article inspection (FAI) requirements, and audit the CM's adherence and inspection records.
• Develop test protocols appropriate for a high‑power termination assembly (e.g., dielectric/hi‑pot testing, torque/connection integrity, thermal cycling, contact resistance) to validate performance and safety.
• Lead pilot builds at the CM, driving root‑cause resolution of build and process issues and feeding learnings back into design and work instructions.
• Build out the production process plan (routers, work instructions, fixturing/tooling strategy) in collaboration with the CM.
• Drive continuous improvement across pilot and early production builds toward the lowest sustainable cost, shortest lead time, and highest quality steady‑state production design.
• Manage the ongoing CM relationship: capability assessment, quoting/negotiation support, capacity planning, and issue escalation/resolution.
• Interface with supply chain to qualify critical component and raw material suppliers feeding the termination assembly.
• Create and maintain manufacturing documentation: BOMs, process flow diagrams, inspection plans, and non‑conformance/CAPA processes.
• Own the non‑conformance loop with the CM: run Material Review Board (MRB) dispositions (use‑as‑is, rework, repair, scrap) and drive corrective and preventive actions (CAPA) to closure, including verification of effectiveness.

What You'll Bring

• 7+ years of manufacturing engineering experience, including direct experience selecting, onboarding, and managing contract manufacturers for complex electromechanical or high‑power assemblies.
• Strong background in DFM/DFA for high‑power systems (e.g., busbars, connectors, terminations, cable assemblies, power distribution hardware).
• Experience developing incoming inspection and final test/qualification plans for electrical or electromechanical assemblies.
• Track record of leading successful pilot builds and transitioning designs into scalable, cost‑optimized production at a CM.
• Solid understanding of GD&T, root cause analysis (8D, 5‑Why, fishbone), and process control methods (SPC, FMEA).
• Hands‑on experience standing up in‑process inspection, chairing MRB dispositions, and driving CAPA/8D investigations at a contract manufacturer.
• Strong supplier management and negotiation skills, with experience running CM RFQs/RFPs and performance scorecards.
• Ability to travel to CM/supplier sites as needed.
• Bachelor's degree in Mechanical Engineering, Electrical Engineering, Manufacturing Engineering, or a related field (or equivalent practical experience).

Nice To Have

• Experience with cryogenic systems or components.
• Experience with pressure vessel design, fabrication, or qualification (e.g., ASME Section VIII).
• Experience with data center or critical power infrastructure hardware.
• Familiarity with high‑voltage/high‑current safety standards and testing (e.g., IEC, UL, or similar).

VEIR is committed to equal pay for equal work in its compensation practices. The base salary range for this position in the U.S. is $120,000 - $140,000 per year + equity + benefits. A candidate's salary is determined by various factors including, but not limited to, relevant work experience, skills, certifications, job level, supervisory status, and location.

BENEFITS & PERKS

• Healthcare coverage with 100% employer paid premiums for medical, dental, and vision
• 401(k) Retirement Savings Program
• 12 Company Holidays + unmetered PTO
• 12 Weeks 100% Paid Parental Leave for all new parents
• Stock Options
• Employee Assistant Program (EAP)
• Regular teambuilding, off‑sites, and lunch & learns

EQUAL OPPORTUNITY:

We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability, and any other protected ground of discrimination under applicable human rights legislation. We strive to respect the dignity and independence of people with disabilities and are committed to giving them the same opportunity to succeed as all other employees.

To all recruitment agencies: VEIR does not accept agency resumes. Please do not forward resumes to our job alias, VEIR employees, or any other organization location. VEIR is not responsible for any fees related to unsolicited resumes.