Lathe MAchinist I Union

Stolle Machinery Company; Centennial (CO); On-site; USD 28,000 - 40,000; Full time

Job summary

Stolle Machinery Co, LLC in Centennial, CO is seeking a Lathe Machinist I Union to safely set up and operate manual and CNC lathes, manufacturing precision hardware from blueprints.

The role requires 5+ years experience, ability to read complex drawings and GD&T, and strong attention to safety and quality. Expect to work in a manufacturing environment with PPE and teamwork.

Qualifications

• High School graduate or equivalent.
• 5+ years’ experience setting up and operating Manual and CNC Lathes, machining various types of materials.
• Must be able to read and understand machine programs (EIA Program Language).
• Display strong communication skills and be capable of working from verbal and/or written instructions with minimum supervision.
• The individual must perform his/her duties in conjunction with EHS personnel, in such a manner that neither the individual nor others are jeopardized in regard to safety.
• Ability to understand G&M Codes.
• Demonstrate the ability to indicate fixturing and parts.
• Ability to use basic inspection equipment (Height gauge, calipers, mic’s, etc.).
• Read and understand CMM Inspection Reports.
• Understand Cartesian Coordinate System (X, Y, Z).
• Must be capable of setting work coordinates / tool offsets.

Responsibilities

• Complete all setups and efficiently run moderate to very complex parts on Lathes following detailed setup instructions.
• Must consistently demonstrate the ability to meet critical engineering specifications as shown on engineering prints.
• Must be capable of interpreting complex engineering drawings and understanding GD&T requirements.
• Demonstrate the ability to identify process improvements and incorporate necessary changes.
• Must be capable of developing well documented setup sheets, tool lists and other associated documentation necessary for efficient manufacturing of machined parts.
• Communicate with Manufacturing/Operations management and Machinists for shift change over and process requirements.
• Perform routine PM on machines (grease, oil, coolant, filters).

Skills

Reading engineering drawings

G&M codes

Manual & CNC lathe operation

EIA programming language

Communication skills

Education

High School diploma

Tools

CNC Lathes

CMM inspection equipment

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Lathe MAchinist I Union

Englewood Manufacturing - Hourly Full Time Regular Manual Labor Centennial, CO, US

3 days ago Requisition ID: 2839

Salary Range: $25.00 To $25.00 Hourly

The anticipated closing date of this job post is 11/30/2026.

JOB SUMMARY (the purpose and general nature of the job):
Safely and effectively setup and operate Manual and CNC Lathes, manufacturing precision hardware from blueprints and existing programs.
PRINCIPLE RESPONSIBILITIES include, but not limited to, the following:

• Complete all setups and efficiently run moderate to very complex parts on Lathes following detailed setup instructions.
• Must consistently demonstrate the ability to meet critical engineering specifications as shown on engineering prints.
• Must be capable of interpreting complex engineering drawings and understanding GD & T requirements
• Demonstrate the ability to identify process improvements and incorporate necessary changes.

Must be capable of developing well documented setup sheets, tool lists and other associated documentation necessary for efficient manufacturing of machined parts.

• Communicate with Manufacturing/Operations management and Machinists for shift change over and process requirements.
• Perform routine PM on machines (I.E. grease, oil, coolant, filters).

KNOWLEDGE/EXPERIENCE/SKILLS: Minimal requirements for education, knowledge and experience:

• High School graduate or equivalent
• Minimum of 5+ years’ experience setting up and operating Manual and CNC Lathes, machining various types of materials.
• Must be able to read and understand machine programs (EIA Program Language)
• Display strong communication skills and be capable of working from verbal and/or written instructions with minimum supervision
• The individual must perform his/her duties in conjunction with EHS personnel, in such a manner that neither the individual nor others are jeopardized in regard to safety
• Ability to understand G & M Codes
• Demonstrate the ability to indicate fixturing and parts
• Ability to use basic inspection equipment (Height gauge, calipers, mic’s, etc.)
• Read and understand CMM Inspection Reports
• Understand Cartesian Coordinate System (X, Y, Z)
• Must be capable of setting work coordinates / tool offsets.

PHYSICAL/MENTAL DEMANDS AND WORKING CONDITIONS:

This position requires the ability to perform the essential duties and responsibilities in a manufacturing environment that includes exposure to noise, oils, coolants, and other machining-related chemicals.

Physical Requirements:

• Must be able to stand, bend, and walk for extended periods of time throughout the shift.
• Must be capable of lifting and moving up to 50 pounds occasionally without assistance.
• Frequent use of hands and arms for handling tools, parts, and controls.
• Visual acuity required for close inspection of machined parts and reading precision instruments.
• Ability to climb stairs and work in various positions or on machines at different heights.
• Required use of personal protective equipment (PPE), including eye protection, hearing protection, and steel-toe shoes. Additional PPE may be required based on task or material exposure.
• Work is performed in a temperature-variable shop environment with occasional vibration and exposure to airborne particles.
• Must be able to communicate effectively in English and work both independently and as part of a collaborative team.
• Occasional mental focus required for interpreting complex drawings, troubleshooting equipment, or ensuring tight tolerances are maintained.

This position description has been prepared to assist in defining job responsibilities, physical demands, working conditions and skills needed. It is not intended as a complete list of job duties, responsibilities and/or essential functions. Stolle Machinery Co, LLC retains and reserves any or all rights to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper. Additionally, Stolle Machinery Co, LLC is an equal opportunity employer and does not discriminate on the basis of race, color, religion, age, sex (including pregnancy, sexual orientation, and gender identity), national origin, disability, veteran status, genetic information, or any other status protected by applicable law.