Laser/Punch Combination Operator – Amada EMLK 3015 (1st, 2nd, 3rd Shifts)

AST

Grand Prairie (TX)

On-site

USD 28,000 - 39,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

AST Manufacturing in Grand Prairie, TX is seeking a skilled operator for the Amada EMLK 3015 punch/laser system. You will set up, run, and monitor the machine, load tooling, verify programs, and ensure parts meet print and traveler specifications.

The role requires reading blueprints, using calipers and gauges, and performing first-piece and in-process inspections, with emphasis on safety and housekeeping. Shifts include 1st, 2nd, and 3rd, and experience with CNC turret punch/laser equipment is

Qualifications

  • High School Diploma or GED required.
  • Experience operating CNC turret punch, laser, or punch/laser combo equipment (Amada preferred).
  • Forklift and/or overhead crane certification is a plus.
  • Safety training including Hazardous Communication, Lockout/Tagout, Laser Safety, Eye Safety, Fire Evacuation.

Responsibilities

  • Set up and operate the Amada EMLK 3015 to produce parts per job traveler, setup sheet, and customer prints.
  • Load/unload tooling and verify stations, orientation, and die clearance.
  • Call up and run CNC programs, verify program revision, and confirm material type and sheet size.
  • Load sheet material and unload finished sheets; manage scrap and burr removal.
  • Perform first-piece and in-process inspection using calipers, micrometers, gauges, and tape measures; compare results to prints.
  • Report issues such as burrs, misformed features, or dimensional errors to the Programmer/Shift Manager.
  • Conduct routine operator maintenance on laser nozzle, lens, gas levels, and tooling; keep equipment clean.
  • Follow safety procedures and ensure parts meet customer quality levels; keep area tidy and paperwork complete.

Skills

Blueprint reading
Precision measuring tools
CNC controls understanding
Quality problem recognition
Mechanical aptitude
Time management

Education

High School Diploma or GED

Tools

Amada turret punch
Turret punch/laser equipment

Job description

Job Summary

Safely meets the required quality level and production schedule for the Amada EMLK 3015 punch/laser combination machine by setting up, running, and monitoring the machine and inspecting parts, personally or through co-workers.

Essential Duties and Responsibilities include, but are not limited to:

  • Safely set up and operate the Amada EMLK 3015 punch/laser combination machine to produce parts per the Job Traveler, setup sheet, and customer prints.
  • Load and unload turret tooling (punches, dies, forming tools, tapping tools, and multi-tools) per the program setup sheet, and verify correct stations, orientation, and die clearance.
  • Call up and run CNC programs from the machine control, verify the correct program and revision, and confirm material type, thickness, and sheet size before running.
  • Load sheet material and unload finished sheets and skeletons manually or with automated load/unload equipment where applicable.
  • Remove parts from the skeleton (shake-out), break micro-joints, and deburr or clean edges as required.
  • Perform first-piece inspection and in-process checks using calipers, micrometers, gauges, and tape measures, and compare results to the print.
  • Watch for and report problems such as burrs, slug pulling, misformed features, poor cut quality, dross, or dimensional errors to the Programmer and Shift Manager.
  • Perform routine operator maintenance such as checking and cleaning the laser nozzle and lens, checking assist gas levels, lubricating tooling, cleaning the turret and table, and emptying slug and scrap bins.
  • Report worn, chipped, or dull tooling and send tools for sharpening or replacement as directed.
  • Work with all types of sheet metal, including cold-rolled and galvanized steel, stainless steel, and aluminum.
  • Follow all laser safety, machine guarding, and Lockout/Tagout procedures, and never bypass safety devices.
  • Follow all directions as noted on the Job Traveler.
  • Ensure that all parts processed meet the customer’s required quality level. All issues must be reported to the Shift Manager and/or Quality Assurance personnel.
  • Follow the daily production schedule as noted on the Scheduling Board, and communicate any delays to the Programmer/Scheduler.
  • Ensure proper housekeeping around the assigned area, including scrap and skeleton removal and emptying trash at the end of every shift.
  • Complete all production paperwork for each job run on the EMLK 3015, including part counts and scrap.
  • Properly document all spare parts and tooling taken from the Parts Bins or tool crib.
  • Ensure that all completed parts and associated Travelers are taken to the proper location for the next operation or final review.
Physical Effort
  • Ability to sit or stand for 3 to 4 hours before a break.
  • Ability to lift and carry approximately 50 pounds.
  • Ability to handle sheet metal safely, including large or sharp-edged sheets, with proper gloves and PPE.
  • Mental Effort, Knowledge, Skills, and Abilities
  • Must be able to prioritize own workday schedule.
  • Ability to read blueprints and Job Travelers.
  • Ability to use precision measuring tools (calipers, micrometers, gauges).
  • Basic understanding of CNC machine controls and turret punch/laser operation.
  • Good mechanical aptitude and attention to detail.
  • Ability to recognize quality problems early and communicate them clearly.
Recommended Training/Education
  • High School Diploma or GED.
  • Experience operating CNC turret punch, laser, or punch/laser combination equipment (Amada preferred); equivalent experience will be considered.
  • Forklift and/or overhead crane certification is a plus.
  • Safety training including but not limited to Hazardous Communication, Lockout/Tagout, Laser Safety, Eye Safety, and Fire Evacuation.
Shifts
  • 1st Shift: Monday-Friday, 7:00am-3:30pm
  • 2nd Shift: Monday-Friday, 3:00pm-11:30pm
  • 3rd Shift Sunday-Thursday, 11:00pm-7:30am
Job Type

Full Time

This job description in no way states or implies that these are the only duties to be performed by this employee. The employee is expected to perform other duties necessary for the effective operation of the department or unit. The job description above is meant to be an outline; the details may be modified in the future to accommodate changing conditions.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

EMLK (Punch/Laser Operator) - West Bend
EMLK (Punch/Laser Operator) - West Bend

Metalcraft of Mayville, Inc • West Bend (WI)

On-site
USD 42,000 - 62,000
EMLK (Punch/Laser Operator) - West Bend
EMLK (Punch/Laser Operator) - West Bend

Metalcraft of Mayville, Inc. • West Bend (WI)

On-site
USD 40,000 - 65,000
Laser/Punch Combo Operator (EMLK 3015) – 1st Shift
Laser/Punch Combo Operator (EMLK 3015) – 1st Shift

AST • Grand Prairie (TX)

On-site
USD 28,000 - 39,000
Laser Operator – AMADA (1st, 2nd, 3rd Shifts)
Laser Operator – AMADA (1st, 2nd, 3rd Shifts)

AST Manufacturing • Grand Prairie (TX)

On-site
USD 55,000 - 70,000
Laser Operator 1st shift
Laser Operator 1st shift

QualServ Corporation • Fort Smith (AR)

On-site
USD 32,000 - 42,000
Laser Programmer – AMADA
Laser Programmer – AMADA

AST • Grand Prairie (TX)

On-site
USD 28,000 - 41,000
Press Brake Operator – Amada (1st, 2nd, 3rd Shifts)
Press Brake Operator – Amada (1st, 2nd, 3rd Shifts)

AST Manufacturing • Grand Prairie (TX)

On-site
USD 22,000 - 33,000
MACHINE OPERATOR 1ST, 2ND & 3RD SHIFT
MACHINE OPERATOR 1ST, 2ND & 3RD SHIFT

HICKEY-OHL INC • Plain City (OH)

On-site
USD 21,000 - 30,000
Machine Operator - Punch Press (Amada CNC)
Machine Operator - Punch Press (Amada CNC)

Louver Group • Dallas (TX)

On-site
USD 42,000 - 64,000
Laser Operator - 2nd shift
Laser Operator - 2nd shift

Louis Industries, Inc. • Paynesville (MN)

On-site
USD 32,000 - 39,000
Health Insurance
Dental Insurance
Vision Insurance
+5